Offering high-performance audio connections between analog audio gear and Dante devices in a simple and easy-to-use in-line adapter, the ALF-DAO-2XLR from Alfatron is a 2-channel Dante to XLR output adapter compatible with all Dante interfaces. This adapter is ideal for studio or stage, integrating mixers, amps, wireless mics, and other analog sources into Dante networks.

This adapter makes full use of automation and easy-to-use features that have made Dante one of the world's most popular audio networking solutions. You can enjoy two-channel output from Dante to analog devices with two balanced XLR outputs. The adapter offers high-resolution 24-bit / 48 kHz audio with ultralow latency and sample-accurate synchronization. And with simple PoE provided by the Dante device, you don't have to worry about running power cables to the nearest outlet.

Convenient and Intuitive In-Line Adapter    Ideal for Stages, Studios, and More    Dual Channel: Simultaneous Record & Play    Integrates Mixers, Amps, Wireless Mics    24-Bit / 48 kHz Sampling Rate    Power over Ethernet

Related Questions and Answers

Q: 1. Height

A: The Sony XLR-K3M Dual-Channel Digital XLR Audio Adapter Kit with Shotgun Microphone measures 4.25 inches in height.

Q: 2. Is this compatible with the Sony A1 camera?

A: Yes, the Sony XLR-K3M Dual-Channel Digital XLR Audio Adapter Kit with Shotgun Microphone is compatible for use with the Multi Interface Shoe connection on the Sony a1 Mirrorless Camera.

Q: 3. I read through all the Qs and still feel I'm getting conflicting answers, so I'll ask my specific question here. Can I input TWO mics into the XLR channels, and then a stereo mic into the 3.5mm input, and record all of them at the same time (with the 24bit 4 channel option in the a7s iii)??? Thank you!!

A: Yes, you can connect microphones to all three inputs on the XLR-K3M and record them simultaneously onto four channels of audio with the a7S III. Here are instructions based on information provided by Sony which apply to the a7S III and any of the Sony cameras that support 4-channel audio recording: To record the input audio from the INPUT1 jack(XLR) to the CH1 channel on the attached camera; the input audio from the INPUT2 jack (XLR) to the CH2 channel; and the input audio from the INPUT3 jack (3.5mm) to the CH3 and CH4 channels, set the switch to “IN1·IN2.” To record the input audio from the INPUT3 (3.5mm) jack to the CH1 and CH2 channels on the attached camera; the input audio from the INPUT1 jack (XLR) to the CH3 channel; and the input audio from the INPUT2 jack (XLR) to the CH4 channel, set the switch to “IN3.”

Q: 4. Is this compatible with the Sony A7C for digital audio?

A: Yes, fully compatible with A7C camera, according to the manufacturer related products list.

Q: 5. I have XLR-K2 M Audio adapter. Can I be able use MI shoe cable with my XLR- K2M ?

A: The two products and their accessories are not compatible.

Q: 6. Which sony cameras have the Digital Multi Interface Shoe?

A: The Sony A7R IV is the only model that supports Digital Audio through the Multi-Interface Show with this product.

Q: 7. Would I be able to clamp the Rode NTG5 into the holder on the k3m?

A: Yes but you will need to add spacers to make the diameter of the mic larger. https://www.bhphotovideo.com/c/product/341475-REG/Sanken_ROCS_ROCS_Rubber_O_Rings_f_CS_1.html?sts=pi&pim=Y

Q: 8. can you monitor audio with audio out jack??

A: Yes you can use the audio out jack to monitor but you can't plug a headphone directly in the audio out jack and expect it to work as a headphone driver. The audio out jack is at microphone level and is matched to the microphone input on a DSLR camera. You would need an extra pre-amp to monitor the audio at line or headphone level from the audio out jack. However, the Saramonic BMCC-A01 has a dedicated headphone output with a volume control that works easily for audio monitoring of incoming signals. If you want to monitor incoming signals and audio playback from the camera when needed, then use the headphone jack on the camera as the place to plug in your headphones.

Q: 9. Does the K3 work with SmallRig cage on A7S iii? I'd like to keep the cage on, but not sure if there's enough access to hot shoe mounting point.

A: With this version of cage, B&H # SM2999, you would have access to the hot shoe. If you needed to maneuver the mic adapter on the cage, you could use the included hot shoe cable to allow for cage mounting.

Q: 10. Does this send digital signal to a7s and a7sii? Or analog only?

A: This unit sends digital audio to a the Sony a7S and a7SII, which both have the required Multi Interface Shoe .