Qsc Ad-S6T 6.5" Surface-Mount Loudspeaker Pair

Qsc Ad-s6t 6.5" Surface-mount Loudspeaker Pair

Product Code: eq16722
Availability: In Stock

$2,688.00 $4,112.64

Qty

14 reviews Write a review

Description
Reviews (14)

The black AcousticDesign Series QSC AD-S6T 6.5" Surface-Mount Loudspeaker Pairis a pair of transformer-equipped 6.5" surface-mount loudspeakers supplied with award-winning X-Mount systems, making them suitable for 70/100V or 8-ohm operation in a variety of foreground and background music applications, whether installed in horizontal, vertical, wall, or ceiling deployments.

Outfitted with a 6.5" weather-treated woofer and a 1" silk dome tweeter on a DMT waveguide, the AD-S6T offers even 105° conical coverage and improved off-axis response while providing a frequency range of 60 Hz to 20 kHz (-10 dB). The speaker is capable of handling 150W RMS and producing a peak maximum SPL of 116 dB.

The AD-S6T utilizes a 4-pole Euroblock connector under a sealed input cover for easy wiring and protection from moisture. Featuring a rugged ABS enclosure and a powder coated aluminum grille, the AD-S6T boasts dust and splash resistance beyond IP54 ratings for worry-free operation indoors or outside.

6.5" Woofer and 1" Silk Dome Tweeter 150W RMS Power Handling 105° Conical Coverage 116 dB Peak Maximum SPL 60 Hz to 20 kHz Frequency Range Low-Saturation Multi-Tap Transformer Supports 70V, 100V, or 8-Ohm Operation Euroblock Connector for Easy Wiring Includes Award-Winning X-Mount Systems

Key Specs
Active/Passive	Passive
Number of Included Speakers	2
Speaker Configuration	2-Way
Power Handling	For 2 Hours / At Low-Z: 150 W RMS
Constant Voltage / Transformer Taps	70 V: 60 / 30 / 15 / 7.5 W or 8 Ohms Bypass 100 V: 60 / 30 / 15 W or 8 Ohms Bypass
Impedance	8 Ohms (Transformer Bypassed)
HF Driver	1x 1" / 2.54 cm Horn-Loaded Silk Dome Tweeter
LF Driver	1x 6.5" / 16.51 cm Paper Woofer
Frequency Range	60 Hz to 20 kHz -10 dB
Speaker
Active/Passive	Passive
Number of Included Speakers	2
Speaker Configuration	2-Way
Power Handling	For 2 Hours / At Low-Z: 150 W RMS
Recommended Amplifier Power	300 W
Constant Voltage / Transformer Taps	70 V: 60 / 30 / 15 / 7.5 W or 8 Ohms Bypass 100 V: 60 / 30 / 15 W or 8 Ohms Bypass
Impedance	8 Ohms (Transformer Bypassed)
Transformer Wattage	60 W
Enclosure Type	Sealed
Shielded	No
Drivers
HF Driver	1x 1" / 2.54 cm Horn-Loaded Silk Dome Tweeter
HF Voice Coil	1" / 2.54 cm
LF Driver	1x 6.5" / 16.51 cm Paper Woofer
LF Voice Coil	1.5" / 3.81 cm
Performance
Frequency Range	60 Hz to 20 kHz -10 dB
Maximum SPL	110 dB (Continuous) 116 dB (Peak)
Sensitivity	89 dB SPL
Coverage Angle	105° (Conical)
Directivity	5 (Directivity/Q Factor) 7 dB (Directivity Index)
Maximum Input Voltage	35 V RMS
Connectivity
Inputs/Outputs	1x Block 4-Pole Speaker Input/Thru (Removable)
Physical
Operating Conditions	-4 to 122°F / -20 to 50°C
Mounting	1x Bracket Point (Rear)
Construction Material	ABS, Aluminum Grille, Polymer
Dimensions	14.4 x 8.5 x 8.5" / 36.58 x 21.59 x 21.59 cm
Weight	13.6 lb / 6.2 kg (Each Speaker)
Packaging Info
Package Weight	33 lb
Box Dimensions (LxWxH)	20 x 12 x 12"

Designed for foreground and background music sound reinforcement in restaurant, retail, audio visual, education, and large system ancillary support applications as well as in concourses, casinos, transportation terminals, and worship facilities

Supplied with award-winning X-Mount systems to enable easy installation in horizontal, vertical, wall, or ceiling deployments at a variety of angles with no slippage over time

6.5" weather-treated paper cone woofer with a 1.5" voice coil and a 1" silk dome tweeter that matches the sensitivity and performance of the woofer for optimal full-range reproduction

Consistent and even 105° conical coverage is achieved through DMT (Directivity Matched Transition), a QSC innovation which matches the directivity patterns of the woofer and the high-frequency waveguide at the crossover point, resulting in a coherent transition between transducers and improved off-axis response

Rugged ABS enclosure and powder coated aluminum grille

Exceeds IP54 ratings for dust and splash resistance

Low-saturation, low-loss 70/100V transformer with 8-ohm bypass

Rear-panel rotary tap selector is protected by a weather grommet

4-pole Euroblock connector with loop-thru wiring located under a sealed input cover to prevent moisture at the terminals

Advanced voicing filter sets using QSC Intrinsic Correction are available through either Q-Sys processing or CXD amplifier platforms (available separately)

Related Questions and Answers

Q: 1. do these work with the sound bar 300?

A: No they do not.

Q: 2. Is this price for 1 or 2 speakers?

A: Each system is one speaker unit.

Q: 3. Are the wall mounting brackets and speaker wires included with these laudspeakers?

A: According to page 03 in the manual for the Bose FreeSpace 3, it includes flush mounts and surface mounts. https://www.bhphotovideo.com/lit_files/703689.pdf

Q: 4. Does this item include the rough in kit or bracket for ceiling support?

A: This will include the c-ring and tile rails.

Q: 5. Does this yoke also work with QSC k12 speaker?

A: This yoke will not fit the QSC K12

Q: 6. Are these speakers weather resistant? For outdoor?

A: No they are not weather resistant. Enclosure Characteristics: Ingress Protection: IP-44 Operating environment: Designed for indoor use Operating Temperature: -4 to 122°F (-20 to 50°C)

Q: 7. can this be used for horizontal mount like the other E series yoke mounts? is it different in some way to the E12YM, E15YM?

A: Per QSC: Note: E110 Yoke does not support horizontal deployment, only vertical deployment..

Q: 8. Is shipping free to Hawaii?

A: I am sorry it would not be free shipping to Hawaii, This item is eligible for free expedited shipping in the contiguous (lower 48) United States. Expedited shipping should arrive in 1-3 business days, depending on your location. Expedited Delivery not available to PO Boxes.

Q: 9. Hi! Are these XLR?

A: The Bose FreeSpace FS4SE Surface-Mount Indoor/Outdoor Passive Loudspeaker (Pair, White) does not have an XLR input. It is designed to work with 18 AWG (0.8 mm2) to 14 AWG (2.1 mm2) size speaker wire only as illustrated on page 5 of its manual, which is linked here: https://www.bhphotovideo.com/lit_files/996223.pdf.

Q: 10. can I use this speaker home Theater purpose?

A: Yes you can! These speakers are ideal for Monitoring due to the tight dispersion and the multiple amount of various input these speakers have it could definitely be used for Home Theater use.

Kevin	27/09/2024
[300 W] If you know Tannoy - you know how good these sound. Powering them with a Sonos AMP and they look and work great. 5

Nathan	21/09/2024
[2-Way] We are very happy with our AD-S6Ts. They sound great and have good coverage while also not looking like an eyesore. Highly recommend! 5

Gordon	12/09/2024
[2-Way] These speakers matched my 2.1 Bose speaker system. 5

Peter	11/09/2024
[Sealed] It has fantastic sound in a small footprint. Great price with included carry bag. 5

Peter	21/08/2024
[35 V RMS] great sound,volume,light in weight.better than the 8.2 which kept breaking down... 5

Rishi	16/08/2024
[Passive] great sound 5

Skip	16/08/2024
[89 dB SPL] I bought 2 of these speakers to run out smaller workshop events with and to have them be the lead loudspeakers for our 500+ festivals where we rent 4-6 other similarly sized units. The vocals and cleanliness of music at nearly all volumes in unmatched. We love that these have a lot of manual controls (DEEP, flat, external sub + Vocal boost, normal) outside of the mixer to further tailor what we're using them for in any given set. Yes, these have the DEEP effect which adds a substantial amount of low end if you don't want to tie in subwoofers. Love them. 5

Pete	25/07/2024
[Passive] I've had a pair of these for a few years now. They work very well as stage monitors. I use mine primarily as a monitor for my keyboards when performing. There is a multi-position switch that changes the EQ depending on the listening mode, but I usually leave it in Stage Monitor mode. Inputs are combination XLR / 1/4 TRS jacks. However, the daisy-chain connection to another monitor is XLR only - not 1/4 TRS, which is a pain in the neck sometimes. And the volume setting on the first monitor determines the maximum volume setting on any daisy-chained monitors. Overall, a very rugged monitor that has been dropped a few times and taken its share of abuse, but has never failed me. And it's a lot smaller and lighter than comparable stage wedges. To make sure I never lose the power cord, I have caribiners on the handle and the AC cord that I just snap together when transporting it. B&H occasionally has sales on these and also bundles (stand and XLR cable) - jump on those sales when available! 5

Ken	22/07/2024
[89 dB SPL] These protect the speakers very well. In the past I had no covers and the speakers would get beat up and look like they just came off a international road show. These covers/Totes keep them looking new...I like them very much. 5

Sergey	22/07/2024
[2] At home stereo set up, wanted to try new tech, noticed local rental joints are exclusively QSC (no passive speakers though). Ordered smallest QSC speakers - I liked their look for home and their 85 degree pattern; with the idea to return them if I don't like the sound . I employ them with a 200W Mackie amp and SVS-SB3000 sub, through a DDRC-24 Dirac Live room corrector. The result is very pleasing, and the Tannoys are now retired. There is more clarity in the sound and I can push more (a lot of) power into the system with the clarity still remaining there. I don't have to sit on the sofa to enjoy the sound, so 85 degree pattern is working well. Note they are not flat, they require EQ/DSP corrector. 5