The white AcousticDesign Series QSC AD-S6T 6.5" Surface-Mount Loudspeaker Pairis a pair of transformer-equipped 6.5" surface-mount loudspeakers supplied with award-winning X-Mount systems, making them suitable for 70/100V or 8-ohm operation in a variety of foreground and background music applications, whether installed in horizontal, vertical, wall, or ceiling deployments.

Outfitted with a 6.5" weather-treated woofer and a 1" silk dome tweeter on a DMT waveguide, the AD-S6T offers even 105° conical coverage and improved off-axis response while providing a frequency range of 60 Hz to 20 kHz (-10 dB). The speaker is capable of handling 150W RMS and producing a peak maximum SPL of 116 dB.

The AD-S6T utilizes a 4-pole Euroblock connector under a sealed input cover for easy wiring and protection from moisture. Featuring a rugged ABS enclosure and a powder coated aluminum grille, the AD-S6T boasts dust and splash resistance beyond IP54 ratings for worry-free operation indoors or outside.

6.5" Woofer and 1" Silk Dome Tweeter    150W RMS Power Handling    105° Conical Coverage    116 dB Peak Maximum SPL    60 Hz to 20 kHz Frequency Range    Low-Saturation Multi-Tap Transformer    Supports 70V, 100V, or 8-Ohm Operation    Euroblock Connector for Easy Wiring    Includes Award-Winning X-Mount Systems

Designed for foreground and background music sound reinforcement in restaurant, retail, audio visual, education, and large system ancillary support applications as well as in concourses, casinos, transportation terminals, and worship facilities

Supplied with award-winning X-Mount systems to enable easy installation in horizontal, vertical, wall, or ceiling deployments at a variety of angles with no slippage over time

6.5" weather-treated paper cone woofer with a 1.5" voice coil and a 1" silk dome tweeter that matches the sensitivity and performance of the woofer for optimal full-range reproduction

Consistent and even 105° conical coverage is achieved through DMT (Directivity Matched Transition), a QSC innovation which matches the directivity patterns of the woofer and the high-frequency waveguide at the crossover point, resulting in a coherent transition between transducers and improved off-axis response

Rugged ABS enclosure and powder coated aluminum grille

Exceeds IP54 ratings for dust and splash resistance

Low-saturation, low-loss 70/100V transformer with 8-ohm bypass

Rear-panel rotary tap selector is protected by a weather grommet

4-pole Euroblock connector with loop-thru wiring located under a sealed input cover to prevent moisture at the terminals

Advanced voicing filter sets using QSC Intrinsic Correction are available through either Q-Sys processing or CXD amplifier platforms (available separately)

Related Questions and Answers

Q: 1. Has anyone used these with SRX828SP subs? Any reports? What’s the ideal sub to 906LA ratio?

A: This is a subjective situation and the answer will be based on the application, size of the room, the style of music, as well as the volume that it will be played at through the system. Please contact us directly by phone or through live chat and give us a bit more information about the application and how the system will be used so we can provide you with the appropriate advice.

Q: 2. can I use this speaker home Theater purpose?

A: Yes you can! These speakers are ideal for Monitoring due to the tight dispersion and the multiple amount of various input these speakers have it could definitely be used for Home Theater use.

Q: 3. Can I pair this with the QSC 6.5" DualCoil Subwoofer?

A: You can combine the QSC AD-S.SUB 6.5" DualCoil Subwoofer with the AD-S8T 8" 2-Way 200W Surface-Mount Loudspeaker if you use a separate power amp and a crossover, but they cannot be connected directly to each other.

Q: 4. Does this yoke also work with QSC k12 speaker?

A: This yoke will not fit the QSC K12

Q: 5. Does this work with K10 and K10.2 or only K10.2?

A: To guarantee compatibility, it is advised to use the yoke that has been designed for the K10 Item# QSK10YOKE

Q: 6. Hi! Are these XLR?

A: The Bose FreeSpace FS4SE Surface-Mount Indoor/Outdoor Passive Loudspeaker (Pair, White) does not have an XLR input. It is designed to work with 18 AWG (0.8 mm2) to 14 AWG (2.1 mm2) size speaker wire only as illustrated on page 5 of its manual, which is linked here: https://www.bhphotovideo.com/lit_files/996223.pdf.

Q: 7. Are these speakers weather resistant? For outdoor?

A: No they are not weather resistant. Enclosure Characteristics: Ingress Protection: IP-44 Operating environment: Designed for indoor use Operating Temperature: -4 to 122°F (-20 to 50°C)

Q: 8. What warranty is on qsc e112

A: This QSC E112 12" Two-Way Passive Loudspeaker (Black) BH #QSE112BK • MFR #E112-BK would have a 3 year manufacturers warranty.

Q: 9. Are the wall mounting brackets and speaker wires included with these laudspeakers?

A: According to page 03 in the manual for the Bose FreeSpace 3, it includes flush mounts and surface mounts. https://www.bhphotovideo.com/lit_files/703689.pdf

Q: 10. Which size speakers in side

A: The Bose Professional FreeSpace 3 Surface-Mount Satellite Loudspeaker features a 2.5" full-range driver within.