Mount a manual MFT lens on your modified GoPro with this Micro Four Thirds Adapter from Back-Bone Gear. Compatible with the H9PRO, H10PRO, H11PRO, and H12PRO modified GoPro models, which cannot communicate with or supply power to automatic lenses, this low-profile adapter is designed for use only with fully manual MFT lenses. The package includes the necessary mounting screws, a T3 screwdriver, a plastic MFT cap, and a protective pouch for storage and transport.

MFT Adapter for Modified GoPro Cameras    For H9PRO, H10PRO, H11PRO & H12PRO    Supports Only Manual MFT Lenses    MFT Cap & T3 Screwdriver Included    Protective Pouch Included

Related Questions and Answers

Q: 1. image stabilization work with this ?

A: Yes, image stabilization will work with this adapter.

Q: 2. Does this adapter connect to this Celestron SLR Camera Adapter to insert into a 1.25 ?https://a href= http://www.bhphotovideo.com/c/product/202135-REG/Celestron_93625_SLR_35mm_OR_Digital.html target= _blank www.bhphotovideo.com/c/product/202135-REG/Celestron_93625_SLR_35mm_OR_Digital.html/a

A: B&H # CETA1.25 MFR # 93625 fit into the telescope eyepiece perfectly. I had a little trouble holding it securely in place with the thumbscrew on the eyepiece holder, but it was doable. On the other end, I purchased a canon mount that would connect the camera to this adapter you asked about. All in all pretty slick little adapters. I have an unresolved problem getting my camera to focus through the telescope. I think it is due to my ignorance.

Q: 3. Hello , Please advice if this can be used with JVC GY-LS300 camera ?

A: I only tested it on my BlackMagic Studio camera, and worked very nice. I have no idea on how it performs on other kind of camera. I'm not an expert

Q: 4. Will this fit a Olympus OMD5 Mark II camera?

A: Yes, this will fit on your Olympus OM-D 5mk II camera.

Q: 5. What is the outer diameter at the t-mount end of this adapter?

A: Mine is 54.7mm, just shy of 55mm. I just measured it with calipers.

Q: 6. I have a Nikon p900, will it fit the 67mm lense ?

A: The Vello T Mount Lens to Micro Four Thirds Camera Adapter is designed for use with cameras that have/use interchangeable lenses, as the adapter is designed to connect a screw T-mount lens onto the Micro Four Thirds lens mount used on Panasonic/Olympus Micro Four Thirds cameras. The Nikon Coolpix P900 Digital Camera is a point-and-shoot camera and does not use interchangeable lenses, and would not be compatible for use with the above adapter.

Q: 7. can I used canon lense with panasonic Linux gh4 camera with help of this adapter

A: No, this is an adaptor for 4/3 (older Olympus and Panasonic) lenses. Vello have two Canon to Micro 4/3 adapters on B&H: one for Canon EF/EF-S lenses and one for Canon FD lenses. However, neither of these provides automatic aperture control, focusing, or exposure metering.

Q: 8. does this adapter change the focal length of the lens used?

A: It doesn't change focal length. Just allows four thirds lenses to work on Micro four thirds cameras. Some lenses however, focus better than others with this adapter and I wouldn't recommend attaching heavy lenses to it.

Q: 9. Will this adapter allow for autofocus and other features with the Olympus OM-D E-M1 MarkIII?

A: Yes, this Vello Auto Lens Adapter - Four Thirds Lens to Micro Four Thirds Camera is going to allow for autofocus and other features like aperture control to work on the OM-D E-M1 Mark III.

Q: 10. Hello. Will this adapter work with the Black Magic Design Studio Camera HD 2? I would like to use an older Fujinon 2/3 16:9 SD/HD lens with that camera.

A: You can attach a B4 lens to the Black Magic Design Studio Camera HD with this adapter. However, you can only use a lens that has a 2x extender and it is engaged at all times. Otherwise the the lens will not make an image big enough to cover the sensor.