Designed for Liberty 3 Hub and Link systems, the Anchor Audio WBL3L Wireless Beltpack Transmitter Lapel Micis a wireless beltpack transmitter compatible with headband, collar, ultralite, and lapel microphones. The beltpack operates in the 1.9 GHz frequency range and features a 3.5mm input connector, a volume dial, and an on/off switch. The unit is powered by two AA batteries and can perform for up to 8 hours.

For Liberty 3 and Link Systems    3.5mm Mic Input Connector    Includes LM-Link Lapel Microphone    Volume and Mute Controls    Up to 8 Hours of Operation    1.9 GHz Wireless Frequency Range    Powered via 2 x AA Batteries    Includes Belt Clip

• 1.9 GHz wireless frequency range
• 3.5mm microphone input connector
• Volume and mute control on the microphone
• One-time pair function allows you to pair your mic with your system once without having to repeat the operation
• Runs up to eight hours on two AA batteries

• CM-LINK collar mic
• EM-LINK Ultralite earset mic
• HBM-LINK headset mic
• LM-LINK lavalier mic

Related Questions and Answers

Q: 1. Hello, does it work for the range 626-668mhz ?

A: No the Sennheiser 578854 Antenna only works for (558 to 626 MHz).

Q: 2. will this antenna work with the EK 100 G2 A receiver with the same frequency 518-554mhz?

A: Replaced the antenna on my G2 and it works great!

Q: 3. This antenna suits for the G3 transmitter also?

A: Yes they do, and they are very easy to replace. With the right tools 5 min

Q: 4. Can it be used for Zoom calls on Android device with wired headphones connected via mini jack?

A: No. It has USB C connector: Sennheiser XS Lav USB-C Lapel Mic (Computers & Mobile Devices with USB-C Ports)

Q: 5. Will this also work for a G2 EW-100? (the older model)

A: Yes, im fairly sure it will work. I used this part to replace the antenna on a Sennheiser receiver which I am guessing was the same model as yours the first EW100 that took two AA batteries instead of a single 9v. No problems as far as I can recall. Good luck.

Q: 6. Will this antenna work for range G 566-608? And both receiver and transmitter?

A: Yes. The Sennheiser 578854 Antenna can be used with SK 100/300/500 and SK 2000 Bodypack Transmitters from the G2, G3, and G4 series that operate on any frequency band between 558 to 626 MHz.

Q: 7. Is the blue cable included? This set contains set BH#SEWXSPLSTR?

A: Yes, the Sennheiser XSW-D Portable Lav Mobile Kit with Transmitter, Receiver, Lapel Mic, Mounts & Manfrotto PIXI Tabletop Stand does include the blue cable. There are two cables included with this kit. One is a locking 3.5mm TRS to 3.5mm TRS coiled cable, and the other is a locking 3.5mm TRS to 3,5mm TRRS coiled cable.

Q: 8. Hello Is the Sennheiser EW 100 G3 (558-626 MHz) compatible with this antenna?

A: Yes, the Sennheiser 578854 Antenna is compatible for use with for SK 100/300/500 G3 and SK 2000 Bodypack Transmitters (558 to 626 MHz). The SK 100 G3 is the transmitter that is included with a Sennheiser EW 100 G3 Wireless Microphone System.

Q: 9. Can the blue TRS to TRRS cable be purchased separately?

A: Here is a link to the standalone product page for that cable. https://www.bhphotovideo.com/c/product/1629643-REG/sennheiser_508908_cl_35_trrs_locking.html

Q: 10. Will this work on the newer G3s?

A: Yes, I bought these antennas to replace some broken ones for ew100 G3, and they are worked good. I measured the length, check frequencies bandwidth with original A-band both are the same. Make sure to get the right bandwidth of the antennas, choose the right band. Easy to replace.B&H customers service is excellent.