Orbbec Femto Bolt Depth Camera | 3D Imaging Solution

Orbbec Femto Bolt Depth Camera | 3d Imaging Solution

Product Code: eq167800
Availability: In Stock

$1,254.00 $1,755.60

Qty

16 reviews Write a review

Description
Reviews (16)

Designed for AI developers using 3D vision applications, the Orbbec Femto Bolt Depth Camera | 3D Imaging Solutionfrom Orbbec Femto Bolt Depth Camera | 3D Imaging Solutionis a high-performance device with multi-mode depth and RGB cameras that deliver resolutions up to 3840 x 2160 at 5, 15, 25, and 30 fps. Its 1MP sensor delivers a 120° FOV, while HDR functionality helps preserve details. This camera uses Microsoft's ToF technology and has operating modes and performance that are similar to the Microsoft Azure Kinect and Orbbec Femto Mega. Also featured are rolling and global shutters, wavelength sensitivity up to 850nm, and a USB-C 3.2 Gen 1 interface that delivers power and data. The camera may also be powered using an included AC adapter.

1MP ToF Sensor with 120° FOV 4K RGB with HDR 3840 x 2160 Resolution at 30 fps Color: Rolling Shutter IR: Global Shutter 850nm Wavelength USB-C 3.2 Gen 1 Interface

General
IMU	6 DoF Frequency Range: 50 to 2000 Hz Data Format: Float
Mirror Mode	Supported, Non-Mirror by Default
Processing	Host
Operating Modes	DC Power + USB-C Data USB-C Power + USB-C Data (Depth & IR Mode Supports 640 x 576 and below, Y16 Format. Color Mode Supports 1920 x 1080 and Below, YUY2 and MJPG Format.)
Supported Functions	D2C, Multi-Camera Sync
Shutter Type	IR: Global Shutter Color: Rolling Shutter
Wavelength	850 nm
WFOV Unbinned	1024 x 1024 at 5 and 15 fps FoV: 120 x 120° Range: 0.82 to 7.25' / 0.25 to 2.21 m Format: Y16
WFOV Binned	512 x 512 at 5, 15, 25, and 30 fps FoV: 120 x 120° Range: 0.82 to 9.45' / 0.25 to 2.88 m Format: Y16
NFOV Unbinned	640 x 576 at 5, 15, 25, and 30 fps FoV: 75 x 65° Range: 1.64 to 12.66' / 0.50 to 3.86 m Format: Y16
NFOV Binned	320 x 288 at 5, 15, 25, and 30 fps FoV: 75 x 65° Range: 1.64 to 17.91' / 0.50 to 5.46 m Format: Y16
RGB	3840 x 2160 at 5, 15, 25, and 30 fps 2560 x 1440 at 5, 15, 25, and 30 fps 1920 x 1080 at 5, 15, 25, and 30 fps 1280 x 720 at 5, 15, 25, and 30 fps FoV: 16:9, 80 x 51° Format: YUY2, MJPG, H.264, and H.265 1280 x 960 FoV: 4:3, 65 x 51° Format: YUY2, MJPG, H.264, and H.265
Inputs / Outputs
USB I/O	1 x USB-C 3.0 / 3.1/3.2 Gen 1 Integrated Male Input/Output
Trigger Sync	8-Pin Connector for Multi-Device Sync
Wireless
Mobile App Compatible	No
Power
Power Source	AC Adapter with Power Brick, USB
Power Consumption	4.35 W (Typical)
Power Input	12 VDC/2 A 5 V/3 A USB-C
Power	DC/USB-C
Environmental
Certifications	RoHS, REACH, WEEE, CE, FCC
Operating Temperature	50 to 75°F / 10 to 24°C
Operating Humidity	90%
Physical
Mounting	Bottom: 1x 1/4"-20 Side: 4x M2.5
Color	Black / White
Cable Length	Not Specified by Manufacturer
Dimensions	4.5 x 2.6 x 1.6" / 115 x 65 x 40 mm
Weight	11.8 oz / 335 g
Packaging Info
Package Weight	1.565 lb
Box Dimensions (LxWxH)	9.5 x 6.5 x 3.1"

Depth camera with 1MP ToF sensor and 120° FOV
4K RGB with HDR
IMU: 6DoF
Data interface: USB-C 3.2 Gen 1
Power: USB-C/DC, 4.35W average
Trigger/Sync Control
SDK: Windows or Linux

High resolution and high accuracy across a wide range of operation
Wide Field of View covers a large area
HDR (High Dynamic Range) function for RGB preserves details
Easy camera setup with a rich set of APIs for various applications

Depth and RGB cameras and IMU in a single device
Combined data and power with USB-C 3.2 Gen 1 connection
High-precision synchronization trigger control

Related Questions and Answers

Q: 1. Will this work with a Datavideo PTC-140 ptz camera? Thanks in advance

A: The AIDA Imaging VISCA Serial & IP PTZ Camera Controller will work with the Datavideo PTC-140 PTZ camera using various protocols.

Q: 2. Are there any spare conductors in the 150 meter tether?

A: There are no spare conductors for the tether. Here is everything included: Controller 492' Tether Wireless Transmitter 2 x Dive Lens Filter Balancing Weight Charger Hardshell Case Limited 1-Year Warranty

Q: 3. Does receiver have hdmi out ?

A: This is not going to have an HDMI out.

Q: 4. Can I preview my LUTs in realtime with this monitor?

A: Yes you can.

Q: 5. Is it possible to control some cameras with RS-232 and others with VISCA over IP from the same joystick?

A: Yes, you can work with the AIDA Imaging VISCA Serial & IP PTZ Camera Controller and control cameras via RS-232 connections as well as Visca over IP simultaneously.

Q: 6. How do you save more than nine presets for a single camera? I can see how to save them, but I can't call anything over 9.

A: The AIDA Imaging VISCA Serial & IP PTZ Camera Controller can support up to 10 presets per camera. Keys one through nine will recall their corresponding preset, and key zero will recall the tenth preset.

Q: 7. Will this control PTZ-X20-IP with RS-232 serial cables?

A: Yes, the AIDA Imaging 20x Full HD IP Broadcast PTZ Camera can be controlled with the VISCA protocol with the AIDA Imaging VISCA Serial & IP PTZ Camera Controller.

Q: 8. Does this support Panasonic AW-HEx control?

A: The AIDA Imaging VISCA Serial & IP PTZ Camera Controller will accept control from Panasonic AW-HE cameras that provide RS-422 or RS-232 output. The wiring pinouts should match the camera and the controller.

Q: 9. does this controller allow you to power down and power up ptzs?

A: The AIDA Imaging VISCA Serial & IP PTZ Camera Controller cannot be used to power down or power up PTZ cameras.

Q: 10. Does this camera pan tilt zoom? Do I need a controller to do so?

A: Yes, the following item does support PTZ functionality.

James	26/09/2024
[90%] Performs better than expected. Cube lights added to the top help with low light conditions. 5

Zachary	18/09/2024
[1.565 lb] Camera definitely takes some getting used to. B&H shipped it very quick and secure. Quality is phenomenal, just needs to work out some scan issues. Sometimes has connectivity issues, have to restart camera to resolve. Seems would need to remove closet doors to get an accurate scan everywhere, or you have calibration issues if you open them to scan in after. 5

Peter	15/09/2024
[Black / White] But must buy pro subscription to use camera 5

Joe	08/09/2024
[850 nm] The camera fits the backpack, with ample room for my IPad and lens cleaning equipment. The tripod is easy to operate, and very stable in use with the Matterport camera. The tripod in the kit I purchased did not include a method to connect the camera to the tripod. I purchased a ball head with the Required ARCA type quick connect device pre-installed. It works great, and is easier for me than trying to level the camera with the legs of the tripod. Just ensure you get a good grip on the handle of the camera before you release the ball head lock. The straps on the back pack do not appear to be adequate to hold the heavy tripod, so it may be useful to obtain a case for the tripod. The Matterport system works as advertised, my first tour was returned in 2-3 hours, the quality and color fidelity was much better than I expected, given the poor lighting conditions present during use. I recommend this package, as long as you can stand Matterport's business b practices. 5

Gary	24/08/2024
[DC/USB-C] They were quickly delivered & worked great. 5

Mike	12/08/2024
[850 nm] I was currently using the Pro1 and upgraded to the Pro2 after doing the research. It is amazing! It scans faster than the Pro 1 and 4K quality is amazing!!! BH live chat was awesome as well 5

Rafael	06/08/2024
[DC/USB-C] Very easy to use and install. Using it on a jetson xavier NX for mapping and real-time tracking of objects. 5

Will	17/07/2024
[DC/USB-C] This truly is a game changer for so many industries. I had my first virtual tour done in a few hours of receiving the kit from B&H. 5

VIDITA	04/07/2024
[DC/USB-C] This product is excellent, and they are providing so many features like advance density, custom view and many more like this. 5

Greg	19/05/2024
[1.565 lb] This camera is amazing quality and comes with a built in quick release. The case that is part of the bundle is high quality as well. 5