Etc Opto 8-Port Terminal Splitter Din Rail

Etc Opto 8-port Terminal Splitter Din Rail

Product Code: eq167888
Availability: In Stock

$3,720.00 $4,724.40

Qty

19 reviews Write a review

Description
Reviews (19)

The DIN rail ETC Opto 8-Port Terminal Splitter DIN Railfeatures DMX input and throughput ports and provides reliable DMX data distribution. Using DMX and RDM protocols, the splitter is offered as a solution that unlocks the power of your DMX system. It has optically isolated DMX512 ports and supports DMX512, DMX512 (1990), and DMX512-A. It supports ANSI E1.20 RDM and up to 256 total RDM devices. This DIN rail version is nine DIN units wide and complies with the DIN 43880 standard.

DMX Input and Throughput Optically Isolated DMX512 Ports Supports up to 256 Total RDM Devices Power and DMX Status Indicators

Key Specs
Inputs/Outputs	8x Terminal 3-Pin (DMX) Output 1x Terminal 3-Pin (DMX) Input 1x Terminal 3-Pin (DMX) Throughput
Channels	512 (DMX)
Power Source	AC Adapter
Protocol	DMX512, RDM
General
Inputs/Outputs	8x Terminal 3-Pin (DMX) Output 1x Terminal 3-Pin (DMX) Input 1x Terminal 3-Pin (DMX) Throughput
Channels	512 (DMX)
Dimming	Optional
Cooling System	No
Power
Power Source	AC Adapter
Power Consumption	8 W
Input Power	12 to 48 VDC
Compatibility
Protocol	DMX512, RDM
Physical
Operating Conditions	14 to 149°F / -10 to 65°C at 5 to 95% Humidity
Storage Conditions	14 to 158°F / -10 to 70°C
Certifications	cETLus, CE, RoHS, WEEE
Environmental Resistance	No
Material of Construction	Plastic
Dimensions	6.3 x 3.5 x 2.3" / 16.0 x 8.9 x 5.8 cm
Weight	0.56 lb / 0.25 kg

Related Questions and Answers

Q: 1. Does it come with a European 220V adapter and plug for the Netherlands?

A: yes and Eu plugs

Q: 2. Does the this cord convert digital to analog?

A: Not quite. The IK Multimedia interface that this cable connects to, would do that work and then it would send that conversion, via lightning connector, into the compatible iOS device that you are using for recording.

Q: 3. I'm only getting outputs on ch. 1& 2. 3& 4 won't send signal. I'm sending 1080p to my switcher. Ch.3 I changed cables to connect to a monitor and no picture. What are the cable requirements for HDMI on this switcher?

A: I would check the working cables with the ports that not working. If those cables are longer runs that could be the issue. A good cable choice is BH #KOHDA525BR or BH #COHDHD25EST

Q: 4. What about latency between in and out? Can it be used for live stream from camera?

A: The latency on this unit will be extremely low, you should not even notice it.

Q: 5. Does this support Dolby Atmos protocols?

A: This lists support for DOLBY/DTS 5.1.

Q: 6. Does this work only with a monitor or with a TV as well?

A: Yes, this will work with a TV as well as a monitor.

Q: 7. If this won’t extend the image on to 2 or more monitors what will?

A: This is a 1 x 2 HDMI Splitter. It will take a single HDMI input and output the same exact signal to two monitors.

Q: 8. Could you provide the pinouts of the Mini-DIN to the lightning connector?

A: Unfortunately, this is not public information at this time. The Mini-DIN connector is designed for our Mini-DIN compatible products. We do not suggest using these for third party products as we cannot guarantee success. Please feel free to reach out to our team for more information here: https://www.ikmultimedia.com/contact-us/

Q: 9. This can be used with a self-powered remote to trigger the shutters on two DSLR cameras simultaneously?

A: The Pluto Flash Splitter Cable may work in that scenario. Only way to know is to try it out. It could be that when the signal splits that the power is not strong enough to trigger the camera or it could work. Only way to know is to try it out.

Q: 10. Is the Power supply included ?

A: Included in the box are: KanexPro 1x4 HDMI Splitter Power Supply Limited 1-Year Warranty

CReyes	27/09/2024
[Plastic] I bought this two years ago and have had zero problems with it. I hooked up the USB power cord to an extension cable to give me ample room. It takes two DisplayPort monitors and daisy chains the signal so it can go into a single DP connection. 5

Truman	25/09/2024
[Plastic] Easy to use, the material are strogn and have a enough size cable for your setup camera. Super!!! 5

Chadnozza	18/09/2024
[12 to 48 VDC] Pop it in the gel frame holder at the front of the light. You'll still be able to use a gel frame in the space behind or in front, or a top hat in front of it (the donut and top hat together really clear up the image), though you can't have all three at once - there's only two slots in the mini's frame holder. 5

byronomo	03/09/2024
[AC Adapter] I used this product to use a SlingBox ProHD as a second "monitor" on my HTPC. Prior to using this device, the HDCP would generate an error in Windows Media Center as it believed that I was splitting the content into 2 (which, technically I was). 5

Owen	21/08/2024
[DMX512, RDM] I have not put this into a real scenario yet, it will be 2.5 months, but so far, it is working as advertised. Replaced an old splitter from another company. 5

Fred	15/08/2024
[8 W] I used this product at our Church to send praise and worship words to 2 TV's and a Momitor from my i-Mac. It worked well and had no problums. 5

Carl	04/08/2024
[AC Adapter] I ended up using this and the original handle on my Eva1 to supplement the recoil handle I had originally thought was the best way to go. Love it, makes for a handy EVF mount. Built like a tank. 5

James	03/08/2024
[8 W] Hope to have slightly higher build quality but at this price point I have no complaints 5

debgig	15/07/2024
[8 W] [This review was collected as part of a promotion.] I received a Plugable USB 2.0 2-Port Splitter in exchange for my use and honest review. This is absolutely the epitome of "plug and play" technology. All I had to do was open the packaging, insert it in one of my computer USB ports and voila! How convenient! 5