Etc Response Opto 8-Output Splitter Emergency Din Box

Etc Response Opto 8-output Splitter Emergency Din Box

Product Code: eq167890
Availability: In Stock

$4,800.00 $6,192.00

Qty

13 reviews Write a review

Description
Reviews (13)

The emergency DIN box ETC Response Opto 8-Output Splitter Emergency DIN Boxis cETLus listed to UL 924 and features DMX input and throughput ports to provide reliable DMX data distribution. Using DMX and RDM protocols, the splitter is offered as a solution that unlocks the power of your DMX system. It has optically isolated DMX512 ports and supports DMX512, DMX512 (1990), and DMX512-A. It supports ANSI E1.20 RDM and up to 256 total RDM devices.

DMX Input and Throughput Optically Isolated DMX512 Ports Supports up to 256 Total RDM Devices cETLus Listed to UL 924

Key Specs
Inputs/Outputs	8x Terminal 3-Pin (DMX) Output 1x Terminal 3-Pin (DMX) 1x Terminal 3-Pin (DMX)
Channels	512 (DMX)
Power Source	AC Adapter
Protocol	DMX512, RDM
General
Inputs/Outputs	8x Terminal 3-Pin (DMX) Output 1x Terminal 3-Pin (DMX) 1x Terminal 3-Pin (DMX)
Channels	512 (DMX)
Dimming	Optional
Cooling System	No
Power
Power Source	AC Adapter
Power Consumption	8 W
Input Power	12 to 48 VDC
Compatibility
Protocol	DMX512, RDM
Physical
Operating Conditions	14 to 149°F / -10 to 65°C at 5 to 95% Humidity
Storage Conditions	14 to 158°F / -10 to 70°C
Certifications	cETLus-UL 924, CE, RoHS, WEEE
Environmental Resistance	No
Material of Construction	Aluminum, Plastic
Dimensions	14.0 x 8.0 x 5.1" / 35.6 x 20.3 x 13.0 cm
Weight	14.5 lb / 6.6 kg

Related Questions and Answers

Q: 1. Would this be correct size for a Canon C200 with a short zoom?

A: At bare minimum you would want the medium and even that would be a bit tight, however it would work. The large might give you a bit more wiggle room.

Q: 2. Will the small work best with Sony A6600 and Sony E PZ 18–110 mm F4 G OSS or is medium a better option?

A: Yes. The small would be the best choice.

Q: 3. Well this product seems very interesting, I have a doubt to be cleared. I am planning to record from a microphone to two different recorder. Both of them have Phantom power. Will I be able to block phantom power to one recorder and supply phantom from only one providing to microphone as shown in the picture? Will the audio Quality will be the same. Actually one is recording with full effects and eq and another one is for just RAW vocal as backup and further processing if needed.

A: The only recorder that the phantom should be on is the one the mic is plugged into. Then feed the other recorder with the phantom block output.

Q: 4. Would this fit a Lumix g9 with a 100-400 lens?

A: Yes, this will certainly work well with the G9 and the 100-400mm lens.

Q: 5. Would this medium size be okay for Nikon D7500 with the Nikon 500mm PF lens on it. The whole thing is just over 14". Also, will the Peak Design strap somehow work with this as I strictly hand carry this outfit? THANKS.

A: The Think Tank Photo Emergency Rain Cover (Large), BH # THERCL would have a better fit with your body/lens combination.

Q: 6. Captures audio too?

A: Yes, The KanexPro 4K HDMI to USB 2.0 Capture Box with HDMI Loop Output supports Audio. It supports - USB Audio UAC standard.

Q: 7. Would this cover be hard to use without attaching it to the flash shoe? I would also be using an intervalometer.

A: I don't think it would be an issue, it should more or less stay in place without attaching to the shoe.

Q: 8. would this work with an a7riii with a battery grip?

A: Yes.

Q: 9. will this fit a Nikon z9 + 400 mm 2.8 lens? Thanks!

A: Yes, the Think Tank Photo Emergency Rain Cover will fit the Z9, with the 400mm 2.8.

Q: 10. Will this fit a sony a1 with a 600mm f4?

A: The Sony a1 Mirrorless Camera with the Sony FE 600mm f/4 GM OSS Lens attached will fit in the Think Tank Photo Emergency Rain Cover (Large).

TomDM	27/09/2024
[DMX512, RDM] This splitter was used to allow me to send output from a mixer to the house sound system and to my Tascam recorder. Worked flawlessly. 5

Daniel	26/09/2024
[AC Adapter] I ordered this because of the single cable design with the mic in and headphone out jacks mounted in a small block on one end. Other products feature a split at the plug end into dual cables, which to me seems more frangible and less wieldy. I'm very satisfied with the performance of this adapter. 5

Stace1226	21/09/2024
[8 W] I’m so happy with the adapter I got from startech! I don’t know what we would have done if we hadn’t found startech and all their amazing and affordably priced stuff! I just wish I could thank the person that told me about startech. I ordered frm a certain big name cmpny, & it didn’t cme with the adapter & without it the headphns wouldn’t work! I also got the adapter super fast, so I will definitely b using startech 4 any and all future purchases! 5

Larry	19/09/2024
[DMX512, RDM] I use this for sending a signal from a mic into two cameras on multicam shoots. It works like a charm, and is built like a tank. 5

anyonymous	14/09/2024
[512 (DMX)] The JIB/Y is built like a tank and expect it to last many years. 5

dwardo123	27/08/2024
[AC Adapter] I bought a new laptop that only had the one audio/mic output and I had an older headset that had two separate connections. One for the mic and one for the headset. This splitter saved me from buying a whole new headset by separating the mic and the speaker into two separate connections. The sound was good and the users on the other end did not have any issues with the sound quality of the mic. Unit is small and compact and easily transportable wherever I go. I received this product in exchange for an unbiased review. 5

KCinWV	28/07/2024
[DMX512, RDM] I used this splitter for a conference where there wasn't a way to get an main audio out to record the presenter. I used the JIB/Y Jack in the Box to split the speaker's mic before going into the system amp so I could get a clean recording of the presenter. Worked Great! 5

Jamey	27/07/2024
[12 to 48 VDC] I use this box to run two separate signals from my microphone. The mic is phantom powered and the box keepsthe signal from going back through the line into the other input. very sturdy construction. No perceptable noise. I would buy more of these types of adapters in this brand. 5

Huy	24/07/2024
[DMX512, RDM] Nice sound! Good quality with SwitchCraft connectors. It Great & better than Dante box i has been used before. 5

Jim H1234	14/07/2024
[DMX512, RDM] I have been in the technology business for over 35 years and for the past 20+ years. I have been asked to provide unbiased reviews of various products from both the AV and IT world. In review of this product I have found that it to be a solid product and worked well with my Android devices. There were no issues with Android recognition. In the box: -3.5 mm Headset Adapter M/F In summation, solid product, easy to use. I received this product in exchange for an unbiased review. 5