Enjoy ultra-high-definition images while concealing your speakers with the EPV EF138C-AT8-ISF Sonic AT8 ISF eFinity 54.1 x 127.2" EDGE FREE Acoustically Transparent Fixed Frame Projection Screen. The EF138C-AT8-ISF is a cinema wide 2.35:1, 138" diagonal, low-profile, EDGE FREE fixed frame screen featuring EPV's Sonic AT8 ISF screen material.

The Sonic AT8 ISF surface is designed to work with all lens throws to provide ISF-certified color accuracy and wide diffusion uniformity for projected images, while offering sonic transparency to hide in-wall speakers. The Sonic AT8 ISF is UHD ready due to the multilayer ultrafine knit design to negate the moiré effect common to acoustically transparent screens, and it works best in dark environments like dedicated home theater rooms. The eFinity Series features an ultrathin, 0.4 inch, black aluminum bezel to maximize the viewable area for the footprint. The EF138C-AT8-ISF assembles and installs in minutes using a spring and grommet system for attaching the wraparound tensioned screen material, allowing for a taut, flat surface.

All hardware is included, and the lightweight split-frame design makes for easy shipping and delivery to install sites. An LED backlight kit is provided for added visual appearance. Additionally, a sliding wall mount is included to ensure proper alignment with your projector.

138" Diagonal | 2.35:1 Aspect Ratio    Sonic AT8 ISF Screen Material    1.0 Screen Gain | 180° Viewing Angle    Acoustically Transparent and Moiré-Free    UHD Ready    ISF Certified for Accurate Color    0.4" Thin Black Aluminum Frame    Works with All Lens Throw Ratios    Sliding Wall Bracket Included

The screen features an acoustically transparent, fine-weaved projection material with black backing attached. The material is designed for Ultra-HD projectors to provide the best projection surface for dedicated home theaters. It has earned the world-renowned ISF Certification for providing a flat spectral response and rendering accurate colors in a dark room environment.

To obtain ISF certification a projection screen must meet a list of essential ISF qualities such as accurate color fidelity, uniform spectral response, and black level performance.

Related Questions and Answers

Q: 1. Can this wind screen fit onto the rode ntg 4?

A: The NTG 1,2,4 are all about the same size, The NTG3 is tinnier and the NTG4 Plus is longer to accommodate the internal battery. I need one for the NTG4 PLUS.

Q: 2. Could this projector be used to light the tip of a match head? Adjusting the metal leaves minutely etc. And is it possible to use the metal leaves to block out the light completely?

A: When pairing this projection attachment with a Godox S30, you can add framing shutters to tighten down the beam to potentially light the tip of a match head. The Godox Framing Shutters for Projection Attachment (Set 4), BH # GOSA07 https://bhpho.to/3erZcAN

Q: 3. Which c-stand would be recommended for the projection attachment and a Forza 500? Is BH #IMLSCT40MBK not strong enough?

A: If you just want to put the light and Nanlite Projection Attachment for Bowens Mount with 19° Lens on stand with out an arm / boom the stand with out the arm is fine, https://bhpho.to/413b3w9 . But use a sand bag on the bottom of the stand like, https://bhpho.to/3Sf01Qw

Q: 4. Hello. Can I also use the Nanlite projection accessory for Bowens mount with 36 lens with forza 200, 300, 500 and 720?

A: Yes, you can use the Nanlite Projection Attachment for Bowens Mount with 36° Lens along with the Forza 200, Forza 300, Forza 500 and Forza 720 lamp heads.

Q: 5. Does it fit a Sony camera

A: It fits microphones with a diameter of .87 inches (22mm).

Q: 6. Can the PJ-BM projection attachment be used with one of the following light stands: IMLS96HABI, IMSLSAC12

A: The Nanlite Projection Attachment with 36 & 19° Lens Kit for Bowens Mount BH #NAPJBM3619 is about 15lbs. Both of the stands you ask about are rated for 22lbs. Depending on the light your going to use, the stands might be suitable.

Q: 7. What is the color gel that fits this holder? it is not SA-11C, which is too small and I have tried.

A: We do not have the Color Filter Holder for Projection Attachment BLP, BDP, MLP in house to measure since it is special order. But you can cut most larger gels to size with a pair of scissors such as the Pro Gel Vivid Colors Filter Pack 12 x 12" (30.5 x 30.5 cm) BH #PRPG12213 • MFR #PG12-213 or individual sheets of Rosco or Lee gels.

Q: 8. Does this fit the Rode VMGO Video Mic GO Lightweight On-Camera Microphone?

A: The WSVM is designed to accommodate the diameter and length of the NTG1, NTG2 & VideoMic only.

Q: 9. Is this projection attachment compatible with Dedolight DLH2 150w Tungsten Lights?

A: According to the manufacturer the attachment is safe on a 150w tungsten Dedolight.

Q: 10. Does this work with Aputure lights? Yes, both Bowens mount, but do the optics work? Still sharp?

A: No, the Nanlite Projection Attachment is designed and made for lights such as the Nanlite FS Series and larger.