The OConnor 1040 Fluid Head 30L Tripod Ground Spreaderis a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn or think about the differences between fluid heads. The head supports 45 pounds' worth of camera and accessories at a center of gravity (COG) 5 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own and helps the camera to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1040 is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1040 extremely versatile and suitable for use with heavy ENG-style cameras all the way down to lightweight cameras, while maintaining the same operational feel.

The 1040 features a large Euro-style quick release plate. The QR plate allows you to mount and remove the camera by lifting straight off the head and not having to slide it in from the back. The fluid head is able to tilt 90 degrees forward and back, allowing you to tilt the camera straight down and then straight up, all in the same shot. The camera also features independent drag controls and locks for both pan and tilt. The included 100mm ball base is removable and can be replaced with other available bases. The included pan handle can be attached to either side of the the fluid head, utilizing the mounting rosette on either side of the head.

100mm Ball Head Supports up to 45 lb    Dual-Stage Carbon Fiber Tripod    Max Height up to 70.5", Ground Spreader    3 Rubber Feet, Soft Carrying Case

The 1040 supports cameras and accessories up to 45 pounds at a COG of 5 inches. This is what the counterbalance can cancel out while keeping the head neutral in any position in the tilt range. The sinusoidal counterbalance supports lighter cameras and features near-zero balance error. The stepless counterbalance can be set all the way down to zero to accommodate lightweight cameras.

The 1040 provides a very wide tilt range of 90 degrees forward and and rear tilt, while supporting camera packages weighing up to 45 pounds (5" COG).

The head features independent controls on the pan and tilt for lock and drag. The pan and tilt locks are easy to operate. Both controls match well with the controls of OConnor's larger 2575 and 2065 heads, making it easy for operators to move between the heads without having to relearn each head.

The included 100mm ball base provides a side support base that easily accommodates the heavy loads this fluid head can support. The ball allows you to quickly level your shot without having to adjust the tripod legs. The ball base is also removable and available options include a Mitchell, 150mm ball base, 4-bolt, 3-bolt, or quickfix.

Related Questions and Answers

Q: 1. Does this tripod come with a way to level the head via a ball independent of the legs? Or must you adjust the legs to level it?

A: The head of the Manfrotto 612 Nitrotech Fluid Head with 645 FAST Twin Carbon Fiber Tripod System and Bag attaches to the tripod legs via a half ball which allows for leveling the head independently from the legs.

Q: 2. Where is made in?

A: According to the information we have, our current inventory's Country of Origin is Taiwan. Please be aware this can change over the product's production life without notice.

Q: 3. Hi, love this tripod, but could benefit from a spreader. Don't see an option in the Accessories. Is there a spreader option?

A: The locking single leg design of the Manfrotto 612 Nitrotech Fluid Video Head and 536 Carbon Fiber Single Leg Tripod does not require a spreader. Manfrotto does offer spreader options for the 536 tripod. You could work with a universal dolly solution like the following if you were looking to use a ground spreader. SmallRig Universal Tripod Dolly BH #SM3986

Q: 4. the description here says a 33lb max load, but the description for this head has a max load of less than 18 lbs. is the max load of this head less than 18lbs?

A: Yes that is correct. While the legs of the miliboo MTT609A will support 33lbs the head on this model will only support 17lb payloads safely.

Q: 5. will a manfrotto MVR901EPLA fit this?

A: Yes, the Manfrotto Pan Bar Clamp Attachment will fit onto the Libec LX7 M Tripod's pan bar.

Q: 6. Hi! is it possible to remove the mid level spreader and use it with the floor spreader? tx!

A: Yes you may. The Libec SP-2B is the correct floor level spreader to consider, thanks.

Q: 7. How does this fluid head perform if less than 4 kilos of weight are added to this tripod?

A: The counterbalance capabilities are rated and tested for 3.99kg or higher, thus the counterbalancing options will not perform to the product's expectations.

Q: 8. What is the load capacity of the whole setup? (i.e. How heavy a camera can be used safely on it)

A: In the specifications page of the Manfrotto 612 Nitrotech Fluid Video Head and Carbon Fiber Twin Leg Tripod, it can handle up from 8.8 to 26.5 lb / 4 to 12 kg.

Q: 9. What's the difference between this spreader and the other 165? Link here: https://a href= http://www.bhphotovideo.com/c/product/552329-REG/Manfrotto_165_165_On_Ground_Tripod_Spreader.html/prm/alsVwDtl target= _blank www.bhphotovideo.com/c/product/552329-REG/Manfrotto_165_165_On_Ground_Tripod_Spreader.html/prm/alsVwDtl/a

A: B&H # MA165 is for tripods with rounded rubber/plastic feet pads, B&H # MA165MV is for tripods with spiked feet.

Q: 10. How tall is it and how does it weigh?

A: Sorry, but this tripod and battery selection is no longer available. The tripod and head are still available. See below.The maximum height is 62.2 (158cm). The combined weigh 10.6 lbs (4.8kg).