Kondor Blue Knob Pack Raven Black 2-Pack

Kondor Blue Knob Pack Raven Black 2-pack

Product Code: eq168348
Availability: In Stock

$33.00 $46.53

Qty

9 reviews Write a review

Description
Reviews (9)

Customize your rig with this raven black Knob Pack from Kondor Blue. This two-pack provides replacement options for your ratchet knobs that are easy to install with an optional 2mm Allen key.

Easy to Install Mounts with Optional 2mm Allen Key

Physical
Color	Raven Black
Dimensions	0.8 x 0.5 x 0.4" / 20.5 x 12 x 9 mm
Weight	0.07 oz / 2 g
Packaging Info
Package Weight	0.005 lb
Box Dimensions (LxWxH)	4 x 2.5 x 0.35"

Related Questions and Answers

Q: 1. will this work on a Canon t7, the t7 doesn't have a universal hot shoe pin and its been a pain to find a transceiver that has the four pins.

A: Unfortunately, the Plus X transceiver is not compatible with the unique hot shoe on the Canon EOS Rebel T7.

Q: 2. can one specify the european option for purchase?

A: Unfortunately, we only carry the FCC compliant version of this transceiver for the US only.

Q: 3. I have Photogenics Power Light 1250 and use the canon Eos 1-dx Eos 1ds Mark 3 and ds Mark 2,can these cameras fire the strobes if I have the Wizard connected to their hot shoes?? Also where do I find the sync cord for my Norman power packs 400 and 500?

A: Yes it will. if you need a Household adapter Impact Mini (3.5mm) to Household Adapter B&H # IMAMFHH

Q: 4. Will this work with older Norman P2000D packs?

A: Most likely... You'll have to find the sync cord that look like an outlet plug without the ground post. see here-https://a href= http://www.bhphotovideo.com/bnh/controller/search?N=10105412&InitialSearch=yes&sts=pi target= _blank www.bhphotovideo.com/bnh/controller/search?N=10105412&InitialSearch=yes&sts=pi/a

Q: 5. Can I trigger my d800 with a 10 pin adapter, and my flashes simultaneously from another room?

A: To trigger a flash and a camera remotely, you would need the PocketWizard Plus III Two Transceiver Kit (Black) B&H # WIPWP32K as well as the PocketWizard N10-ACC 3' Remote Camera Cable for Nikon 10-Pin Cameras B&H # WIN90MACND to connect one Plus III unit to your camera. The Auto Relay mode is needed in order to fire the flash and the camera at the same time, which the Plus X unit does not have. Please see the following quick start guide for the set up: https://bit.ly/2O57izM

Q: 6. I want to fire a studio or off camera flash that has a PC sync cord but see no socket on this unit just a mini plug. What to do?

A: The Plus X has a 3.5 mm port.It comes with a cord and a bunch of adapters. The main cord it comes with is a 3.5mm to PC Sync.

Q: 7. Can this be attached with Tilta Komodo Cage?

A: We are only aware that the the Kondor Blue Universal Lens Support lens mount is compatible with Kondor Blue Canon and RED cage systems.

Q: 8. got this on the red komodo: KB-KOM-BOT-BK and this adapter DZO-ADPLRBLK. will this product work just fine?

A: The foot of the Kondor Blue Universal Lens Mount Support for Speed Boosters & Adapters can be removed. This should allow the DZO adapter to work with the Kondor support.

Q: 9. i got this on the red komodo: KB-KOM-BOT-BK and this adapter DZO-ADPLRBLK. will this product work just fine?

A: Yes, the Kondor Blue Universal Lens Mount Support for Speed Boosters & Adapters (Black) will work well mounted on the Kondor Blue KOMODO Bottom Plate (Black) in order to support the DZOFilm Octopus Lens Adapter (PL to Canon RF).

Q: 10. Can this pocket wizard work with Novatron lights? I ordered this but the sync input on my light does not match the input pin from this pocketwizard

A: You will need a Novatron to Pocketwizard cable specific to each connector. I normally get mine from flashzebra, but I'm sure B&H sells them too. Give them a call.

Lukas	27/07/2024
[4 x 2.5 x 0.35"] The attention to detail is impressive and was pleased to find a 1/4-20 hole on the bottom of the grip! This is a wrist saver! 5

Kent	05/07/2024
[Raven Black] I could be wrong about this, others are prone to disagree, but it gets complicated. This was purchased to complement the Kondor Blue 501 Adjustable Baseplate. Without this piece of nicely machined, symmetrical alloy, spring releases on both ends, there isn't a large flat surface on the Baseplate to attach directly to any other surface. The Dovetail fits nicely into the Baseplate. Dandy. With some platforms that might well be sufficient. However, most tripod heads and surface mounts have their own dovetail receptacle which require yet another dovetail plate. What you end up with is plates mounted back to back, or more accurately: front to front. Or am I missing something? One minor annoyance: my two plates front to front were not thick enough for the length of a standard ¼-20 camera attachment screw. The end of the screws impede the free sliding of the baseplate along the dovetail. Had to add a bit of spacer between the two dovetails. I know- clear as mud. But there you have it. 5

Martin	05/07/2024
[0.005 lb] Most cages for the Canon R5 C (and R5) block your path to change the filter in the Canon filter adapter. This cage leaves that path open. It additionally is build very solid and the quality is excellent. 5

Jeff	21/06/2024
[Raven Black] Solid build, no wiggle. Looks nice and provides the necessary mounting points and stability for a wide variety of scenarios. Works well with the VR lens too- everything is behind the lens, so no obstructions. 5

Luke	27/05/2024
[Raven Black] This inexpensive piece attaches via a 1/4 20” and saves you the need to hold that extra gear. Mounting the cold shoe plate to the side of your camera or gear cage is like having another arm, and saves you from a jumbled mess. For $10, this is a must have for folks who use cold shoe mounts daily. 5

Brendan	24/05/2024
[4 x 2.5 x 0.35"] I got this and a simple hand grip over the shape one that costs hundreds, it works great. 5

Kevin	18/05/2024
[4 x 2.5 x 0.35"] The specs show that the package is 4 long. Why I would care I don't know. The plate itself is very short, 1.95 / 50mm long. If you are planning to add a second screw and mount it in two places, you have exactly 1.37 / 35mm screw center to screw center to mount both. My smallrig universal large cage doesn't have screws that close together on the bottom. Worth measuring. 5

Jared	29/04/2024
[4 x 2.5 x 0.35"] Excellent piece of hardware. My only criticism is that I wish it was quicker to attach and remove from a camera cage for rebuilds. But that might compromise it's integrity and am ok with that for now. 5