Combine multiple signals with the intellijel Unity Mixer, a dual 3-to-1 or one 6-to-1 unity gain mixer for audio and CV in a tiny 2 HP Eurorack module. It features two sections where three input signals can be summed into one output, and the top is normalled to the bottom allowing the mixing of six signals into one. The module includes a ribbon power cable.

For Audio and CV    Two 3-to-1 Mixers or One 6-to-1 Mixer    Buffered Inputs and Outputs    Outputs are Phase Correct, No Inversion    Unity Mix: Neither Boosted or Attenuated    Slim 2 HP Footprint    Includes Ribbon Power Cable

• Output of top mixer is normalled to the bottom mixer to give a 6:1 mix.
• Buffered inputs and outputs.
• Outputs are phase correct, so there is no inversion of the output signal.
• The input signals are neither boosted nor attenuated (unity mixing). their resultant sum is the output.
• Slim 2 HP footprint.

Version 2 of the Unity Mixer has two sets of jumpers on the main PCB. These allow the top and bottom sum to be set to -6 dB attenuation instead of unity gain. This creates more headroom when summing higher amplitude sources like raw VCO signals.

• 2 HP Eurorack format module
• Maximum depth: 1.1" (29mm)
• Includes power ribbon cable with Eurorack power headers
• Power: +12V: 11mA, -12V: 11mA

Related Questions and Answers

Q: 1. What is the overall length of this plate?Does it come in different lengths?

A: The overall length of the Wimberly Module 8 M-8 is 3 and inches. It does not currently come in different lengths.

Q: 2. When I tried to buy some of these 3 months ago they had been recalled and were unavailable anywhere. Have the problems been fixed?

A: To our knowledge, the previous issues with the PowerMC2 module have been resolved.

Q: 3. Can this be triggered by PocketWizard Plus II?

A: For more information on how to set it up, please see page 3 of its instruction manual: https://bhpho.to/2IXuYcR

Q: 4. Hello, do you have the PocketWizard PowerMC2 using the Frequency version that is CE 433.42 - 434.42 MHz ? Because my PocketWizard TT1 and TT5 is adopting the Frequency CE 433.42 - 434.42 MHz ?

A: Unfortunately, we do not carry the CE frequency triggers. All of the Pocket Wizard transmitters and receivers we sell are made with frequencies for the USA market. We do not offer any Pocket Wizard (or related products) with the European frequency.

Q: 5. Has anyone managed to sync their Einstein strobes at greater than 1/250s using the PowerMC2 on the Einstein and MiniTT1 transmitter and AC3 Zone Controller on their Nikon D700 or D800 cameras? I can't figure out how to make the HyperSync work with this combination.

A: HyperSync results vary by camera and flash. For the Einstein, you need to set the flash to full power and it needs to be in color mode. If you have trouble with your specific setup, you can check the PocketWizard Wiki and/or contact PocketWizard directly for help. Both of those cameras should be able to sync over 1/250 in HyperSync with an Einstein.

Q: 6. Can you power up and turn Off the Einsteins with these modules? Or can they only control light output settings? Looking to add to existing gym setup. I can't find how to do this using AC3, MC2 and TT5 with Einsteins.

A: Yes, you can set the PowerMC2 to wake up the Einstein if you use a MiniTT1, FlexTT5, or FlexTT6 on your camera as the transmitter. You can also have the PowerMC2 allow the flash to hibernate after a specific period of inactivity from the transmitter.

Q: 7. can the Captur Pro be connected by cable directly to Nikon D810 with no other equipment required to capture sound?

A: yes this can be hooked up to a camera directly through the correct cable. the sound triggering will work through the captur pro module.

Q: 8. I bought this and am trying to figure out how to use it for interviews for video production. Any suggestions?

A: Plug your microphones into the Yamaha mixer and then connect this mixer to your camera or video switcher/mixer.

Q: 9. Does anyone know if it will fit the Edelkrone SliderPLUS PRO XLarge?

A: Yes it will.

Q: 10. How many sl 2 can connect with 888

A: The Sound Devices 888 16-Channel / 20-Track Multitrack Field Recorder offers connection to one Sound Devices SL-2 Dual SuperSlot Wireless Module for 8-Series Mixer/Recorder.