Add a high-quality, multifunction PTZ camera to your conference room, event space, education environment, or house of worship with the gray Medical-Grade Roll Stand with 10x PTZ Camera & Speakerphonefrom BZB Gear. The camera features a 1/2.7" CMOS sensor and outputs up to 1080p video over HDMI, SDI, USB 3.0, USB 2.0, or uses RSMP/RTSP protocols to stream video and audio to the Internet.

The camera supports uncompressed video transmission over MJPEG, H.265, and H.264 compression formats. When connected to the Internet, this IP camera allows you to control PTZ actions and monitor the surveillance area from a remote location via a Web browser. This provides you with several advantages like reduced integration costs, easy remote production and engineering, and lower cost for multiple location systems. You can also manage the unit via IP using VISCA-over-IP/ONVIF or by using its RS-232/RS-485 serial port with a separately available serial PTZ controller. You can power the camera with the included power adapter, or you can utilize your existing PoE (Power-over-Ethernet) LAN to save cable runs.

Equipped with a 10x optical zoom and a 12x digital zoom, this PTZ camera enables you to zoom in on activity in the monitoring area for a closer look, and it has a wide field of view for capturing large meeting rooms. It features an RJ45 Ethernet output that can transmit up to 1080p video to any RTSP/RTMP streaming network so you can broadcast live directly to internet streaming sites. The camera also supports 3.5mm stereo audio input, allowing you to capture and embed AAC or G711 audio with the video signal.

Medical Cart with 4-Wheel Base    10x PTZ Camera with Full HD Video    Speakerphone System with 360° Audio    Efficient Cable Management    Aluminum Alloy, Sheet Metal & ABS Build

Remote learning, lectures, webcasting, video conferencing, remote training, remote medicine, interrogation, and emergency command systems

Built-in VISCA, PELCO P/D, ONVIF with support for RS-485, RS-232, LAN (VISCA over IP), and IR remote control

3G-SDI, HDMI, and USB 3.0 (with cables 10' or shorter) as well as LAN IP streaming using TCP/IP, HTTP, DDNS, UDP, RTSP, RTMP, SMTP, UPnP, or SNMP protocols

Ultra-quiet pan/tilt design, horizontal ±178 degrees, vertical -30~+90° rotation, high-precision stepper motor drive with 0.01° accuracy

Built-in 3.5mm analog audio input interface and G.711, G.722, G.722.1, G.728, and G.722.1C AAC audio encoding (supports line-in audio function through IP stream only)

Further reduce noise while ensuring image sharpness

Easy to enter Menu for preview and setting changes

Advanced video image processing & full HD 1/2.7" CMOS sensor, maximum resolution up to 1080p60

Supports image mirror and flip function with ceiling, wall, tripod, and desk-mounting installations

The IR remote allows for 9 presets and serial or IP control

Related Questions and Answers

Q: 1. What tripod head quick disconnect systems work best with k-10x and the Peak Design Tripod?

A: This plate can be used to attach a tripod head quickly to the Peak tripod: https://bhpho.to/48kZH9Q

Q: 2. I have a Manfrotto 294C4 monopod. Would you recommend the Sirui G-10X Ball Head for the monopod? Does it fit well?

A: That ball head will fit fine on that monopod. It is very subjective to use a head on a monopod. Many just use a quick release and not a head when using a large/long lens. Some prefer for video to use a video head (pan/tilt). Either way that head is very strong and can support a lot of weight.

Q: 3. Would this ball head hold a Canon 7D MkI and Canon 100-400mm f/4.5-5.6L IS USM lens steady without creep when locking in place? I've heard good things about this ball head, but want to make sure it will stand up to the weight of a super telephoto lens. Thanks in advance for any help!

A: This is an amazing product it will hold what ever you need it too hold. It all depends on the tripod but i have this product and it does its job well. This product does its job well.

Q: 4. Are the threads holding the ballhead mounting plate to the tripod made of plastic or metal?

A: The whole ball head is made of metal.

Q: 5. will this ball head fit a Manfrotto 055XPROB Tripod?

A: This is Head to Tripod Mounting Thread: 3/8 -16 on Siri. Check your tripod specs for the size.

Q: 6. Is this head sturdy enough for a Nikon AF-S NIKKOR 600mm f/4E FL ED VR Lens?

A: It won't break but won't be very useable. I use the Novoflex Magicball for heavy lenses. It's the best. a href= http://www.bhphotovideo.com/c/product/153279-REG/Novoflex_MB_Magic_Ball_with_Socket.html target= _blank http://www.bhphotovideo.com/c/product/153279-REG/Novoflex_MB_Magic_Ball_with_Socket.html/a

Q: 7. Does the screw in the quick release plate has a D-ring on it?

A: Yes it does good quality product

Q: 8. Will this ball head work/fit properly with the Sirui T-2005x tripod when folded in the carry position?

A: I didn't attach my G10X ball head to a SIRUI trod I have an old Sears aluminum tripod with a video head, and I wanted the versatility of a ball head, the G10 works fine with apsc lenses bur it's a little light for full frame lenses,so you might want to up grade!

Q: 9. Will this fit on a Manfrotto Beefree? If yes it appears the diameter of this ball head is 49mm and the manfrotto base is 40mm. Will this affect the stability?

A: Sure it will fit. The top of the tripod and base of the ball head are both milled in the factory to be perfectly flat. They don't need to match perfectly. If they do, that is a plus for looks only. Tripods and heads use either 3/8 or 1/4 inch thread and adapters are very inexpensive.

Q: 10. Will this head work with canon r7 and canon 500 f/4 mk l. Lens is around 8 lbs

A: The Sirui K-10x Ball Head has a payload capacity of 44lb, which should support the combined weight of the Canon EOS R7 Mirrorless Camera (B&H # CAER7) and the Canon EF 500mm f/4L IS (Image Stabilizer) USM Lens (B&H # CA5004LISEF) with the Canon Control Ring Mount Adapter EF-EOS R (B&H # CAMAEFRFCR). It's important to adapt this system with sturdy tripod legs as well.