The Audio-Technica ATW-1701 Camera-Mount Wireless Micis a digital wireless microphone system specifically engineered to meet the audio needs of vloggers, mobile journalists, and videographers. It provides an easy-to-operate solution with sophisticated technology to ensure reliability and high-quality audio for projects ranging from YouTube and wedding videos to corporate spots and interviews.

The ATW-1701/L features an omnidirectional lavalier microphone and bodypack transmitter for hands-free speech and dialog, along with a camera-mount receiver that connects to your DSLR or mirrorless camera via the included 3.5mm output cable. It operates anywhere in the world, transmitting 24-bit/48 kHz audio in the 2.4 GHz spectrum, well away from potential TV and radio interference.

This peer-to-peer system delivers three levels of diversity assurance—frequency, time, and space—for optimal performance at a range up to 100'. Just power up the components, and the receiver automatically seeks out a clean frequency and pairs up with the transmitter, saving you the hassle of scanning and syncing before a shoot. Up to eight wireless mics may be used on set at once.

Plug & Record Set for DIY Videographer    MT830cW Omnidirectional Lavalier Mic    Bodypack Transmitter    Triple-Diversity Camera-Mount Receiver    Protected Peer-to-Peer Connection    Easy to Use, Flexible Operation    Balanced Output & Headphone Output    7-Hr Batteries + USB Power    Up to 8 Mics on Set / 100' Range

• Space Diversity: The receiver compares the signal showing up at its two antennas and chooses the strongest one.
• Time Diversity: The transmitter sends the digital signal in two imperceptibly different time slots and compares the two.
• Frequency Diversity: The digital audio is sent over two different frequencies at the same time and the system chooses the cleaner one.
• For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.

• The MT830cW lavalier microphone features an Audio-Technica cW-style 4-pin locking connector and delivers a natural, broadcast-quality sound optimized for speech intelligibility. Its omnidirectional polar pattern ensures that the sound remains consistent, even when the speaker's head moves away from the mic.
• The level control on the transmitter can be set to match the sensitivity of your microphone or audio source for distortion-free input.
• The output level on the receiver can be reduced by 10 or 20 dB if you find you're overloading the input to your camera or recording device. The 3.5mm output can be switched to deliver either a balanced or unbalanced signal.
• Both the transmitter and receiver are housed in lightweight, plastic chassis and equipped with belt clips. The included shoemount allows you to easily mount the receiver to your camera.
• With just a quick press, the power switch on the transmitter doubles as a mute function. This function can be locked out to prevent an accident.
• Conveniently, the receiver's LCD display shows critical information for the receiver as well as the transmitter—including battery status, signal level, mute status, and channel selection for both units.
• An additional 3.5mm output on the receiver allows you to monitor your signal while recording—helpful if your camera doesn't offer a headphone jack.
• The receiver features a rechargeable lithium-ion battery that provides up to 12 hours of operation. Using the included power adapter, the battery can be recharged via USB in about 4.5 hours, while in operation.
• On the transmitter's end, power is supplied by two AA batteries, giving you up to 7 hours of shooting time depending on battery type and usage.
• With this peer-to-peer system, you can only use one transmitter and one receiver at once. However, up to 8 transmitters can be paired with the receiver ahead of time. This is useful in situations when you have multiple speakers, one after another, and you need to have them miked up and ready to go. All you'll have to do is turn one transmitter off and the next one on.
• For man-on-the-street interviews or if you need to pass the mic between several people, you can add the ATW-T1002 handheld transmitter/microphone to your system.

Related Questions and Answers

Q: 1. I have AT 3000 series wireless microphones, are the connectors on my bodypacks compatible with the System 10 connectors?

A: I wish I could answer this. Right after I acquired the equipment some events happened that have prevented me from even trying it out. Sorry - I don't know.

Q: 2. Can this be used without a camera? Can I record direct to my Mac using an Adobe Audition or Garage Band type application?

A: Yes if you have the adapter or interface for the Apple plug. I use the Tascam iXZ for Apple. You will also need an adapter to make it a 1/4 plug.

Q: 3. Would this Audio Technical System 10 work well with Sony A7S?

A: Yes. Any camera that has an 1/8th inch stereo mic input. Keep in mind the input level adjustment is in an odd place under the battery hood. It can typically be left all the way up unless you are experiencing distortion. Otherwise you have to remove the battery hood and adjust it with this little tool. It has never been an issue for me, but just a heads up.

Q: 4. will this work on a go pro???

A: The Hero2 has the necessary input port, but if you've got a newer model you'll need the GoPro USB to 3.5mm mic adapter - then you're good to go!

Q: 5. Can you use this with the Sony PXW FS7 wireless base on the camera,,,,,or do you have to run an XLR to the Camera?

A: The Audio Technica System 10 receiver requires a cable connection to the Sony PXW-FS7. Not compatible with the Sony Multi Interface shoe.

Q: 6. Can I use the AT 803 mic with this unit?

A: The Audio-Technica At 803 lavalier microphone will not connect to this wireless system. I would recommend the Audio-Technica AT899CW - Sub-Miniature Omnidirectional Lavalier Microphone, BH #AUAT899CW, which is a high quality miniature condenser clip-on microphone that has the appropriate locking 4-pin connector.

Q: 7. Could you tell me which lav mic cpmes with it? Thanks in advance.

A: This system ships with the MT830cW lavalier. See the following link for more information: a href= http://bhpho.to/1BdG8NF target= _blank http://bhpho.to/1BdG8NF/a

Q: 8. I already have a Rode PinMic that I use with a Zoom H1 for maximum discreetness when shooting weddings. Will the PinMic work with this system, or should I make sure to get the audio-technica lavalier?

A: the mic attaches by a unique to AT .. to my frustration my sony mics and sure mics will not work.Also odd with this system is the the the receiver uses 2 aa batteries (normal) the tranmitter pack must be recharged. (weird to me) I bought it for the neat antenna but I'd stick with Sony or Sure in the future. hope that helps. Pete

Q: 9. So what you're saying is the receiver has an internal battery that will need to be recharged? So it's useless until charged? Is the Li-ion battery replaceable on the receiver? Please say it is.

A: This transmitter runs on 2x 1.5 V AA (not included). Standard alkaline or rechargeable AA cells may be used. The receiver portion includes a 3.7V rechargeable Li-ion battery that must be charged prior to use. it is not user replaceable.

Q: 10. I understand that this system does not allow two transmitters for the one receiver. What are my options if I want to have two mica going? It sounds like I need a receiver for every transmitter. So do I just get a y adapter and go right into camera or do I need a mixer? Mind you Ill be mobile and outside for most of my shooting. Appreciate the help.

A: The System 10 Camera mount system has a multi-pairing function that can be used to link a single receiver with up to eight System 10 body-pack or handheld transmitters. Hope this helps...