Rgblink Quad Dvi Input Module Q16Pro Gen2

Rgblink Quad Dvi Input Module Q16pro Gen2

Product Code: eq168724
Availability: In Stock

$2,400.00 $2,880.00

Qty

8 reviews Write a review

Description
Reviews (8)

This Quad DVI Input Module from RGBLink is designed to work with the Q16pro Gen2 1U Video Wall Splicing Processor, but it can also work with the Q16pro 2U and 4U. The unit's fully modular architecture design offers four DVI-I inputs that are compatible with HDMI with HDCP support, EDID management, and handling SMPTE resolutions from 720p50 to 1080p60, and VESA resolutions ranging from 800 x 600 at 60 fps to 1920 x 1080 at 60 fps.

Fully Modular Architecture 4 x DVI-I Inputs for Q16pro Gen2 Support for HDMI with HDCP Inputs Resolutions up to 1080p60 EDID Management

General
Compatibility	RGBLink Q16pro Gen2 1 U, 2U, 4U
Video Resolution	SMPTE: 720p at 50/60 fps, 1080p at 25/30/50/60 fps VESA: 800 x 600 at 60 fps, 1024 x 768 at 60 fps, 1280 x 720 at 60 fps, 1280 x 800 at 60 fps, 1280 x 1024 at 60 fps, 1360 x 768 at 60 fps, 1366 x 768 at 60 fps, 1440 x 900 at 60 fps, 1400 x 1050 at 60 fps, 1600 x 1200 at 60 fps, 1680 x 1050 at 60 fps, 1920 x 1080 at 60 fps
Inputs / Outputs
Video I/O	4x DVI-I Input
Wireless
Wireless	Yes
Power
Power Source	Proprietary Interface
Power	Bus Powered
Environmental
Operating Temperature	32 to 158°F / 0 to 70°C
Operating Humidity	15 to 85%
Storage Temperature	14 to 158°F / -10 to 70°C
Storage Humidity	0 to 95%
Physical
Dimensions	8 x 6.8 x 0.8" / 202 x 172 x 20 mm
Weight	9.5 oz / 270 g

Related Questions and Answers

Q: 1. Do these come with mates or do I have to buy each individually?

A: The NBE-5AC-GEN2 NanoBeam are sold individually but are used in pairs to form a point-to-point outdoor wireless connection.

Q: 2. Is the Reflx Lab Mini compatible with the Leica Q?

A: Yes, the Reflx Lab Mini Flash (Gen2) is compatible with the Leica Q camera. This flash is using a single pin contact which makes it a universal flash.

Q: 3. Whats the distance on these puppies?

A: According to the manufacturer its 15km+.

Q: 4. The signal meter on the side of Nanobeam...does that assist for maximum signal pairing?

A: Yes.

Q: 5. Will my H8 need a firmware update for full functionality with the EXH-8?

A: No firmware upgrade needed- EXH-8 is fully compatible/designed for H8.

Q: 6. Is it compatible with Fujifilm x100vi?

A: The Reflx Lab Mini Flash (Gen2) should work on the Fujifilm X100VI. The flash is a manual non-TTL flash, but it has not been officially tested on the camera.

Q: 7. The Zoom H8 screen only allows 8 inputs to be recorded and mixed. When the EXH-8 is attached, will the screen show 10 tracks available for simultaneous recording and mixing?

A: Yes, when using the EXH-8 you will see the 10 input tracks with level meters and faders displayed on the screen.

Q: 8. so can you have multiple of these, like one as host and others as client and limit the speed of each "client" individually?

A: Yes within the AirOS this can be done.

Q: 9. Is this compatible with older film cameras like the Voigtlander Bessa R3M?

A: The Reflx Lab Mini Flash (Gen2) is compatible with film and digital cameras. The camera needs have a hot shoe not a cold shoe.

Q: 10. Are these weather resistant? Installation on roof of two separate buildings?

A: Yes, these are weather resistant. These require 2 radios to work, send and receive.

ICDave	03/09/2024
[4x DVI-I Input ] Plugged it in and it worked with no adjustments or configuration necessary. Long connection with fiber looks exactly like short connection with DVI cable. I'm running a 1920 x 1200 monitor at 60 Hz. 5

Kolton	09/08/2024
[15 to 85%] Great, works as expected. 5

Mark the Broadcast Engineer	18/06/2024
[Bus Powered] Plug it in, but be sure you are powered down when doing so, it is not Hot Swappable 5

Stringblade	06/06/2024
[Bus Powered] Works as described. 5

Riccardo	28/05/2024
[Bus Powered] TLDR - It really just does exactly what it's supposed to. The one thing I haven't checked out yet is what the deal will be with powering mics on this add on unit. I see there is another micro usb port up top, so I assume it's going to be pretty straight forward, but for the sake of keeping things clean (ten cables coming out of this thing is pretty unwieldy) I plan to keep condensers on the main body of the H8. As to the attachment, it feels very secure. Although it's light and plastic, the fabrication feels of quality. Not that I would test it, but it feels like it could take a spill off of a desk or table. For all of the insanity in our world, it is nice that we have a way to bring 10 tracks out to a location that is reliable, straightforward, and actually very reasonably priced. Kudos to Zoom for building a device like this in an era full of sneaky compromises and proprietary nonsense. 5

anyonymous	17/05/2024
[Bus Powered] We have used this product many times for sending the DVI signal 700+ feet from the computer. No problems at all. Just attach them and they work. 5

James	12/05/2024
[0 to 95%] Essential addition for an H8 setup especially for recording music and events, adds another 4 Channels of XLR inputs bringing the total to ten. Easily add phantom power if needed with a standard USB cable. Just connect and your ready to go, instantly recognized and flawless integration. 5

W Charles	26/04/2024
[15 to 85%] I bought this product to use USB webcams with a HDMI Video mixer for Zoom meetings. Zoom has the capability to switch between multiple webcams but their user interface is awkward. Now my configuration allows me to easily switch between cameras with the push of a button on my mixer. Setup was easy even for a non-technical person like me. I couldn't be more pleased with my purchase and just ordered another unit. 5