Featuring advanced AV protocols out of the box, the Luminex GigaCore 10i 10-Port PoE++ Managed AV Switchfrom Luminex GigaCore 10i 10-Port PoE++ Managed AV Switchhelps to serve as the backbone of your fixed converged AV network. Two SFP+ ports each provide up to 10 Gb/s speed fiber links to compatible devices. Additionally, the eight PoE++ compatible Gigabit Ethernet ports can provide up to 60W of power to compatible devices with a total budget of 150W, allowing you to manage multiple applications on a single network.

The compact, half-width design helps you to optimize your installation by allowing you to fit multiple switches into a single rackmount space. Dual cooling fans help to maintain optimal performance with a 56 Gb/s switching capacity while producing minimal noise.

2 x 10G SFP+ Ports    8 x Gigabit Ethernet PoE++ Ports    56 Gb/s Switching Capacity    150W Power Budget    Desk & Half-Width Rack Mountable    Dual Fan Cooling    Araneo Platform & Web UI Management

Up to 10 Gb/s connectivity through the SFP+ fiber ports allows for full network convergence of lighting control, audio, intercom, and video.

Each RJ45 copper port allows you to operate powered devices such as PTZ cameras, access points, and PoE powered loudspeakers.

GigaCore switches are fully validated in real-world applications with major brands for different protocols, including NDI, Dante, AVB/MILAN, AES67, ST-2110, IPMX, MA-Net, and many more.

The two cooling fans are speed controlled to have minimal noise impact while helping to ensure a long-life operation. This allows you to place the GigaCore in quiet environments like theaters and studios.

The Araneo management tool allows you to manage and monitor your entire network. Its online mode shows everything you need to know about the status of your GigaCore network by visualizing the data streams, topology, and active port statuses. In offline mode, Araneo lets you plan the network topology and GigaCore settings in advance.

The built-in web UI allows you to adjust the settings in an intuitive way. Assigning Groups (VLANS) to ports, creating trunks or adjusting other port and PoE settings can be done on the fly. The status page gives you an overview of the complete switch at a glance and the toolbox page allows management of profiles while letting you easily upgrade the firmware.

Related Questions and Answers

Q: 1. I have the 4D Controller and the old AV-1081 (RS232 in only) if I buy this AV-1281 (RS232 in/out) can I control both Cameras?

A: Yes, the Avipas 4D controller supports - IP & Serial RS-232/422/485 Communication. Yes it should allow you to control IP Network cameras and RS-232 cameras simultaneously.

Q: 2. Are there any joystick control compatible with this camera? Tks in advance!

A: The PTZOptics 4D IP Joystick Controller (GEN3) is a great option for this camera, BH #PTJOYG3. https://bhpho.to/39kXcFn

Q: 3. Can I use the Avipas 1280 with propresenter?

A: Yes you can.

Q: 4. Can this be mounted upside down on ceiling and have the Picture right?

A: Yes it can be and we have the AViPAS Ceiling Mount for Compact Avipas PTZ Cameras, BH #AVC80. https://bhpho.to/38dXcrR

Q: 5. Does this work with the iPad Pro

A: Any Apple device with a lightning connector is compatible with this. except with the iPod touches, the fifth generation iPod touch is the oldest iPod touch compatible.

Q: 6. How far away can the subject be?

A: At 10X, we recommend 40ft or less.

Q: 7. I plan to connect and control this camera with single ethernet cable using PoE. Can I use a 24V PoE injector with this camera or do I need a switch capable to 802.11af PoE?

A: Hi, you can either use a PoE switch or use an injector such as this: TP-Link TL-POE150S Power Over Ethernet Injector BH #TPTLPOE150S • MFR #TL-POE150S - https://www.bhphotovideo.com/c/product/885633-REG/TP_Link_TL_POE150S_Power_Over_Ethernet.html.

Q: 8. what voltage outputs are the 3 charging usb ports running at, 5 volts?

A: Each of the three charging ports outputs 2.4 A (amps/amperes) which is more crucial to charging than voltage. The hub itself takes a 12 V AC adapter.

Q: 9. As this camera has PoE, is it possible for a single ethernet CAT6 cable to power the camera, receive video data with IP streaming into a software such as OBS, as well as receive camera control data from a joystick controller like the AV-3102, which would be plugged into another port on the ethernet switch? Is that the correct set up and can a single Cat6 cable handle all 3 of those functions? Thanks!

A: yes a single cat cable can handle this as long as you are using IP video. you will need a POE switch to provide power to the camera.

Q: 10. Can you live stream to youtube with this camera?

A: Yes, this has an IP Streaming Output which you can use to stream to Youtube.