Build your dream rig with the stealth black intellijel 4U Palette Case, a portable Eurorack case that's an ideal solution for the space-conscious needs of a touring artist. The case offers a single row (104 HP) of standard Eurorack (3U) format and a single row of 1U for extra utility modules.

The case also features a built-in utility row with three 1x4 buffered mults, two 2x1 precision summers, four 1/4" TRS connectors, two 3.5mm TRS MIDI (input and output), USB-B MIDI, a power rocker switch, and a 15 VDC power input. The 4U Palette case includes a power brick, power cord, and a 3.5mm to DIN MIDI adapter.

Standard 3U Row + 1U Utility Row    Three 1x4 Buffered Mult, Two 2x1 Summers    2 x 3.5mm TRS Type-A MIDI I/O + USB MIDI    Four 1/4" TRS jacks (Input or Output)    Robust Power Circuit with 24 Connectors    Threaded M3 Strips for Mounting Modules    Access Connectors for Audio/MIDI Modules    Link Connectors for 1/4" I/O Jacks    Includes 60W Power Brick and Power Cord    Includes 3.5mm to DIN MIDI Adapter

• Anodized aluminum case.
• Aluminum extruded rails.
• Rubber feet to protect your desktop.
• Rear mounted power supply for maximum module depth.
• 104 HP of both 3U space (for standard eurorack modules), and 1U space (for all those necessary little utility modules).
• Three built-in 1x4 buffered mults (chainable into a 1x12) with input level/polarity LEDs.
• Two built-in 2-input summers (chainable with each other and with the Buff Mults).
• Built-in MIDI Input (both USB and 3.5mm TRS Type-A MIDI via the supplied 5-pin DIN adapter).
• Built-in MIDI Out/Thru (via 3.5mm TRS Type-A MIDI jack).
• Four 1/4" TRS jacks, each of which can function as either an input or an output.
• Robust power circuit with 24 shrouded power connectors.
• Access connectors for internally connecting I/O modules to the built-in MIDI and Audio Jacks.
• Link connector for connecting equipped modules (like Mixup and Pedal IO) directly into the 1/4" jacks.

Each of these 1/4" Neutrik TRS jacks can operate as either an audio input or an audio output depending on which modules you connect to the circuit board inside the Palette case. This allows you maximum flexibility when configuring your case—whether you wish to use these audio jacks as outputs for a Palette-based synthesizer; as inputs for a Palette-based effects device; or as a send/return for plugging external pedals or effects devices into your Palette’s signal chain.

These jacks may be used with many different modules (not included), such as the following:

• Stereo Line Out 1U: This module, when connected to an Audio Jacks Connector on the circuit board, sends balanced +4 dBu audio out a pair of 1/4" TRS jacks. Use this module to send audio from your Palette case to a mixer, amp, or DAW.
• Stereo Line In 1U: This module, when connected to an Audio Jacks Connector on the circuit board, receives balanced +4 dBu audio from a pair of 1/4" TRS jacks. Use this module to receive external audio for processing with other modules in your Palette case.
• Pedal I/O 1U: This module, when connected to the Link Connector on the circuit board, addresses a pair of 1/4" TRS jacks—sending an unbalanced line-level output to the left jack, and returning an unbalanced live-level input from the pair’s right jack. Use this module to patch external effects or stomp boxes into your Palette.
• Mixup 3U: This module, when connected to the Link Connector on the circuit board, sends the unbalanced L/R stereo mix from the rear-panel output of Mixup directly to a pair of 1/4" jacks on Palette. Alternatively, you can connect Mixup, so that it receives unbalanced audio from a pair of Palette’s 1/4" jacks, instead.
• Stereo Mix 1U: This module, when connected to the Link Connector on the circuit board, sends the unbalanced L/R stereo mix from the rear-panel output of the Stereo Mix 1U directly to a pair of 1/4" jacks on Palette. Alternatively, you can connect Stereo Mix 1U, so that it receives unbalanced audio from a pair of Palette’s 1/4" jacks, instead.

• Threaded M3 strips for mounting modules.
• Maximum Module Depth 1.8" / 45.5 mm for middle 102 HP, 1.5" / 37.4mm at each 1 HP edge
• High spec 60W power supply capable of powering up to 24 modules with +12V output at 1500mA and -12V output at 1500mA
• Two 5V connectors, delivering up to 500mA between them

Related Questions and Answers

Q: 1. will the shallow units nest ontop the regular depth units? I would like to combine shallow units ontop of my regular depth units

A: Yes, the SKB Roto Rack Cases are designed to be stacked, so the SKB 4U Roto Shallow Rack Case can be stacked on top of standard depth Roto Rack Cases.

Q: 2. Can this slider be mounted to two 5/8 c-stands or light stands?

A: Get two of these to mount on the bottom of the slider. Then you can mount on C-Stand. Be sure to use enough sand bags.

Q: 3. When center mounted on a beefy tripod, does the slider flex at all?

A: Yes, it does. I've center mounted it on a pretty heavy Manfrotto tripod, but my 5D w/ a battery grip was still heavy enough to make it flex. You really need to use two identical light stands or tripods to get the best results.

Q: 4. Will this also fit a MixPre-3 first gen?

A: Yes, the Strut STR-MP3 Stealth ii Custom-Fit Field Case for MixPre-3 II is also compatible with the MixPre-3 I.

Q: 5. Does it come with a plug in port or does that need to be purchased separately

A: It comes with a 40 cable with the LANC plug at the end ready to work. If you need longer cable, then we have extension cables like this. VariZoom VZ-EXTL10 Extension Cable B&H # VAVZEXTL10.

Q: 6. Does this product work with the Panasonic agac 130 and the 160? thank you, John

A: Sorry for both cameras, you need a LANC remote with two connectors, one 2.5mm for zoom and 3.5mm for focus. Here is the best seller zoom control we have for that. VariZoom VZ-ROCK-PZFI Zoom, Focus, and Iris Control for Select Panasonic Cameras B&H # VAVZROCKPZFI.

Q: 7. Will this work on the JVC GY-HM200 camera?

A: Yes. I bought 4 of these for Canon G30's. Not all functions work, but the ones I need do. I also have a JVC GY-HM200U and just tried it and these work as well or better than on the Canons.

Q: 8. I want to shoot video of jewelry: macro and ECU & CU with my Nikon d700. I have a steady video tripod. I am wondering if this will work for smooth shots, vertical and horizontal mounting. Also, is there a motor with two or three axis moves avail? This is a two part question. Please share your thoughts and experience. Starting a jewelry photo/video business and have a lot at stake. Thank you mucho!

A: Kessler is one of the top brands for sliders, you will be able to get a very smooth shots with this unit and it can be set up vertically as well. They also offer motorized units, like the Second Shooter Bundle, that you can use for 3-Axis Motorized Slides.

Q: 9. Will this remote work with all functions with the jvc gy-hm170 4k cam?

A: At this time, VariZoom is only recommending this remote for this camera. VariZoom VZROCK-J600 JVC Zoom/Focus/Iris Control B&H # VAVZROCKJ600

Q: 10. Hello, has anyone tried it with Sony A7s?

A: Yes they are a necessity.