Build your dream rig with the silver intellijel 4U Palette Case, a portable Eurorack case that's an ideal solution for the space-conscious needs of a touring artist. The case offers a single row (62 HP) of standard Eurorack (3 RU) format and a single row of 1 RU for extra utility modules.

The case also features a built-in utility row with two 1x4 buffered mults, two 1/4" TRS connectors, a 3.5mm TRS MIDI input, a USB-B MIDI input, a power rocker switch, and a 15 VDC power input. The 4U Palette case includes a power brick, power cord, and a 3.5mm to DIN MIDI adapter.

Standard 3U Row + 1U Utility Row    Two Built-In 1x4 Buffered Mult    USB MIDI and 3.5mm TRS Type-A MIDI    Two 1/4" TRS jacks (Input or Output)    Robust Power Circuit with 12 Connectors    Threaded M3 Strips for Mounting Modules    Access Connectors for Audio/MIDI Modules    Link Connectors for 1/4" I/O Jacks    Includes 40W Power Brick and Power Cord    Includes 3.5mm to DIN MIDI Adapter

• Anodized aluminum case
• Aluminum extruded rails 
• Rubber feet to protect your desktop
• Rear mounted power supply for maximum module depth
• 62 HP of both 3U space (for standard Eurorack modules) and 1U space (for all those necessary little utility modules)
• Two built-in 1x4 buffered mults (chainable into a 1 x 8) with input level/polarity LEDs
• Built-in MIDI Input (both USB and TRS-A MIDI via the supplied 5-pin DIN adapter)
• Two 1/4″  balanced audio jacks that can be connected to the optional Stereo Line Out 1U, Stereo Line In 1U, Pedal I/O 1U or Mixup.
• Access connectors for internally connecting I/O modules to the built-in MIDI and audio jacks

Each of these 1/4" Neutrik TRS jacks can operate as either an audio input or an audio output depending on which modules you connect to the circuit board inside the Palette case. This allows you maximum flexibility when configuring your case — whether you wish to use these audio jacks as outputs for a Palette-based synthesizer; as inputs for a Palette-based effects device; or as a send/return for plugging external pedals or effects devices into your Palette’s signal chain.

These jacks may be used with many different modules (not included), such as the following:

• Stereo Line Out 1U: This module, when connected to an Audio Jacks Connector on the circuit board, sends balanced +4 dBu audio out a pair of 1/4" TRS jacks. Use this module to send audio from your Palette case to a mixer, amp, or DAW.
• Stereo Line In 1U: This module, when connected to an Audio Jacks Connector on the circuit board, receives balanced +4 dBu audio from a pair of 1/4" TRS jacks. Use this module to receive external audio for processing with other modules in your Palette case.
• Pedal I/O 1U: This module, when connected to the Link Connector on the circuit board, addresses a pair of 1/4" TRS jacks—sending an unbalanced line-level output to the left jack, and returning an unbalanced live-level input from the pair’s right jack. Use this module to patch external effects or stomp boxes into your Palette.
• Mixup 3U: This module, when connected to the Link Connector on the circuit board, sends the unbalanced L/R stereo mix from the rear-panel output of Mixup directly to a pair of 1/4" jacks on Palette. Alternatively, you can connect Mixup so that it receives unbalanced audio from a pair of Palette’s 1/4" jacks, instead.
• Stereo Mix 1U: This module, when connected to the Link Connector on the circuit board, sends the unbalanced L/R stereo mix from the rear-panel output of the Stereo Mix 1U directly to a pair of 1/4" jacks on Palette. Alternatively, you can connect Stereo Mix 1U so that it receives unbalanced audio from a pair of Palette’s 1/4" jacks, instead.

• Threaded M3 strips for mounting modules.
• Maximum Module Depth: 1.8" / 4.6 cm for middle 60 HP, 1.5" / 3.7 cm at each 1HP edge
• High spec 40W power supply capable of powering up to 12 modules with +12V output at 1200mA, -12V output at 1200mA, and +5V output at 500mA.

Related Questions and Answers

Q: 1. Does the new go pro hero 7 Black work with most drones? Besides the karma and 3DR solo since both are being discontinued. Would this work with a dji phantom 2 or 3 for example? Or any other compatible drones out there?

A: We are not aware of a way to mount the Hero7 Black to products like the Phantom 2 or 3. We do not have any solutions available for that at this time.

Q: 2. Does it has international guarantee ?

A: We are only able to sell this camera for shipping within the USA at this time. The Warranty will cover the USA only.

Q: 3. Looking into buying this rack, but am looking for a drawer that fits the shallow case. Any ideas?

A: The Gator Rackworks cases will be one of the few able to mount in a shallow rack such as the SKB 1SKB-R4S.

Q: 4. will the Sony PXW Z190 fit in this case with accessories?

A: This will be a very tight fit for the Z190. Instead I would look at something a bit larger, such as the Arco Video Dr. Bag 30, B&H # ARCSD30B. This bag will be able to handle the Z190 and accessories. https://bhpho.to/2xRoYaa

Q: 5. How fast is the lens, ie, what's the largest aperture?

A: GoPro cameras have a fixed-aperture lens that's rated at ƒ/2.8.

Q: 6. Is there a lid organizer for this case?

A: We are not aware of a lid organizer for this case.

Q: 7. What is the output equivalent of these lights when compared to the Tungsten standard, i.e., 1K, 2K, etc.?

A: LED lights in general and like the Dracast Palette TrueColor LED4000 Soft Panel are not rated in watts. LED lights are rated in Lumen, Lux and or FootCandles. The rating on this light is, 2800K: 994 fc / 10,700 Lux at 3.3' / 1 m 5600K: 825 fc / 8890 Lux at 3.3' / 1 m My guess is it is like a 500-750 watt tungsten light. But does not have the same throw.

Q: 8. What is the parameters waterproof?

A: The HERO7 Black is natively waterproof down to 33' without a housing.

Q: 9. Is it waterproof?

A: Yes. It is waterproof up to 33' without a housing and 131' with the GoPro Protective Housing for the Hero 7 White: https://bhpho.to/3erk1v5

Q: 10. will a canon gl2 video camera and a canon 7d fit in the case with accessories?

A: I am not sure that your camera will fit, but it seems similar to my Panasonic. The case is a good value and very versatile.