Get creative with tempos using the black 4ms Shuffling Clock Multiplier Kit, a DIY Eurorack module that produces eight multiplied clock tempos from a single input clock. The multiplied clock signals range from x1 to x8 (x32 using the separately available breakout module) and include five slipped/shuffled/skipped clock outputs including x3, x4, x5, x6, x8, as well as three steady clock outputs including x1, x2, and x8.

The Rotate CV jack reassigns the multiplication number on all jacks, while the Slip CV causes particular beats to land ahead in time. The SCM Kit includes all the components needed to complete the module as well as a black panel.

Full DIY Kit    Beginner Level Build    8 Multiplied Clock Tempos from Clock In    x1 to x32 Multiply Range    Slipped/Shuffled/Skipped Clock Outputs    x3, x4, x5, x6, x8 (S3, S4, S5, S6, S8)    Steady Clock Out: x1, x2, x8    Rotate CV Input Reassigns Multiply Jack    CV Slip Causes Beats to Land Early    Compatible with SCM Breakout Module

• Includes all the parts necessary to build a full-featured QCD Expander
• Intermediate/Advanced-Level Kit: Soldering proficiency required
• Tools Needed (Not Included):
  • Soldering iron, solder
  • Flush snips
  • Needlenose pliers (for removing a component if you make a mistake)
  • 5/16" and 3/8” socket driver (optional: pliers will work too if you're careful)
  • Multimeter (for reading resistor values if you don't know the resistor color-code chart)

• Multiply-by-1 to Multiply-by-32 (x32 with optional breakout module), on 8 output jacks
• Five Slipped/Shuffled/Skipped clock outputs (S3, S4, S5, S6, S8). Each is based on a multiple of the input clock frequency (x3, x4, x5, x6, and x8, respectively)
• Three steady clock outputs (x1, x2, and x8), which are not affected by Slip/Shuffle/Skip effects
• CV Rotate jack to shift multiply-by amount on all jacks
• CV Slip causes particular beats to land ahead in time
• Connects to the SCM Breakout for controlling more features: Pulse Width, Shuffle pattern, Skip, Resync, Mute, and 4x Fast
• ISP header: Connects to in-circuit programmer such as AVR ISP MKII for reprogramming code
• Maximum input frequency 3 kHz

• Clock Input (3.5V to 15V clock, rising-edge triggered)
• CV Rotate (0V to +5.1V input)
• CV Slip (0V to +5.1V input)
• Multiplied clock outputs (8 jacks where R is the CV rotation 0 to 7):
  • Multiply-by (1+R)
  • Multiply-by (2+R) and slip/shuffle/skip
  • Multiply-by (3+R) and slip/shuffle/skip
  • Multiply-by (4+R) and slip/shuffle/skip
  • Multiply-by (5+R) and slip/shuffle/skip
  • Multiply-by (6+R) and slip/shuffle/skip
  • Multiply-by (7+R) and slip/shuffle/skip
  • Multiply-by (8+R)

• 4 HP Eurorack format module
• Maximum Depth: 1.39" (35mm)
• Includes power ribbon cable with 16-pin Eurorack power header
• Power consumption: +12V: 33mA, -12V: 4mA

Related Questions and Answers

Q: 1. Can this be adapted to fit a Yongnuo 968EX-RT?

A: Yes, but the following adapter is needed in order to mount the system. Vello Flash Multiplier Adapter for Small 1.5 x 3" Flashes BH #VEFMASM • MFR #FMA-SM https://www.bhphotovideo.com/c/product/1415805-REG/vello_fma_sm_flash_multiplier_small_adapter.html

Q: 2. Does Vello Flash Multiplier Adapter for Canon 600EX RT Series fit Canon 600EX RT II?

A: The Vello Flash Multiplier Adapter for Canon works with both the Canon 600 EX RT and the EX RT II .

Q: 3. Will the flash multiplier fit a Nikon sb-700?

A: This will not fit a SB-700.

Q: 4. Which of these would fit well on a Sunpak DF3600U?

A: While the Sunpak DF3600U has similar dimensions to the Canon 580EX series flashes, this adapter could work. However, it has not been tested to our knowledge.

Q: 5. Does it work with the Godox V1 for Nikon?

A: Unfortunately, this softbox is not compatible with the Godox V1.

Q: 6. Will this fit the Yongnuo YN600EX-RT and the Godox TT685c respectively?

A: Yes, the Vello Flash Multiplier-Diffuser Attachment with Large Adapter Kit would be compatible for use with both the Yongnuo Speedlite YN600EX-RT for Canon Cameras and the Godox TT685C Thinklite TTL Flash for Canon Cameras.

Q: 7. Which adapter should be ordered for a Nikon SB800?

A: While we do not have any Nikon SB-800 Speedlight Flashes to test with the Vello Flash Multiplier-Diffuser Attachment, the manufacturer believes the Vello Flash Multiplier Adapter for Small 1.5 x 3" Flashes, B&H # VEFMASM, would be compatible for use with the flash head used by the Nikon SB-800 Speedlight Flash.

Q: 8. Can anyone confirm if the Control port on this version is functional? I've seen reports that early models had issues with that.

A: Tilta confirms that the control port works on the Tilta Advanced Power Distribution Module for RED KOMODO . The Module features the following ports: (1) 14.8V P-Tap Port (2) 14.8V 2-Pin LEMO Port (1) 3 Pin Fischer R/S Port (1) Timecode Port (1) Red CTRL Port (1) Genlock Port (1) 5V USB Port

Q: 9. will this unit display remaining battery on camera similar to the Core SWX Battery plate?

A: Yes, it will display the remaining battery life.

Q: 10. Why this is no longer RED-approved? Any quirk we should be aware of? Thank you.

A: The previous version of the Tilta V-Mount Advanced Power Distribution Module for RED Komodo Type II did not support extended battery data. This has been fixed with this model and it is still going though the approval process with RED.