The white/gray RDL D-TPS7A Passive Single-Pair Sender Mini Jackfrom RDLis a single-pair audio sending module compatible with RDL Format-A twisted pair products. Its front panel features single stereo mini-jack intended for stereo consumer line level audio sources. A studio quality transformer provides isolation between the audio source and the RJ-45 TP CABLE. It is a single-pair sender, which feeds the input signal to the cable pair set on the rear-panel switch during installation. This module drives only one cable pair, therefore a TP CABLE RJ-45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. In addition, two other single-pair senders may be chained to a TP CABLE jack or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair A, B or C.

Single Stereo Mini-Jack    Inputs & Outputs on RJ-45 TP CABLE    Galvanic Isolation    Switch-Selectable Ground Lift for Output    Passive Circuitry, Power not Required    Daisy Chain

Mini Jack input

Stereo audio input combined to mono output

Switch-selects which RJ-45 Pair (A, B or C) is fed

Signal and power pair pass-through between TP CABLE RJ-45 jacks

Passive circuitry does not require power

Galvanic isolation through a studio quality transformer

Daisy chain with single-pair or two-pair Format-A senders

Related Questions and Answers

Q: 1. Does this have phantom power?

A: No this receiver can not provide phantom power, it was designed to be used with dynamic microphones that don't require phantom power or with microphones that can be battery powered.

Q: 2. Can I connect a separate tweeter system to this speaker such as the Pyle Pro PAHT7 6-Way DJ Tweeter System?

A: A separate tweeter system cannot be connected to this P.A.speaker. The end-user does not have access to its crossover network.

Q: 3. Is the price for each or a pair?

A: The price is for a single unit, not a pair.

Q: 4. how do I hook these up to a regular stereo?

A: Yes - use cables like these: Audio-Technica - AT-690 1/4 Male to Dual Banana Speaker Cable (14-Gauge) - 15' - B&H # AUAT69015B

Q: 5. Where did it make?

A: JBL manufacturers its products in several different parts of the world but does not specify where individual products such as the JBL Control 5 Passive 6.5" 2-Way 175W Loudspeakers are made.

Q: 6. Does this product come with a pendant mount kit?

A: The Bose Professional FreeSpace FS4CE In-Ceiling 4.5" 200W Passive Loudspeaker (Pair, White) comes with mounting hardware for in-ceiling installation, as this is an in-ceiling speaker, not a pendant speaker.

Q: 7. is this unit compatible with the Cosco Room Kit Mini?

A: The Cisco Table Microphone is not compatible for integration and use with the Cisco Webex Room Kit Mini. The following link highlights the system compatibility of the Cisco Table Microphone: https://bit.ly/3B9a3fz

Q: 8. Any Sony camera user out there NOT have the timecode signal bleeding issue?

A: We are not aware of the timecode signal bleed you are referring to, but if you need assistance with your Tentacle Sync 3.5mm Mini-Jack Microphone Y-Cable (12") please feel free to email us at https://www.bhphotovideo.com/find/contactForm.jsp, call us at 800.606.6969, or use the live chat feature to receive real time assistance.

Q: 9. Can I use any Lav mic on this transmitter?

A: If your Lav is a Sennheiser (or other brand) that is wired for the Evolution EW series - usually with the locking mini connector, it will work perfectly with this system as well.

Q: 10. Is there a temperature range these can be installed in?

A: This is rated to work between -67 degrees to 120 degrees F. based upon a Mil Spec rating of 810 as listed in the product spec sheet. https://jblpro.com/en/site_elements/jbl-professional-specifications-awc82-spec-sheet