Enjoy professional quality sound reproduction with the LD Systems MON 15 A G3, a compact, powered stage monitor that can double as a main PA speaker and is well suited for bands, performers, DJs, and singer-songwriters. The MON 15 A G3 delivers a powerful and precise sound, thanks to the 300W RMS (1200W peak) Class-D amplifier that powers the 15" woofer and 1" high-frequency driver. The drivers are arranged in a coaxial design for true point-source performance and provide a frequency response of 58 Hz to 18 kHz with a peak SPL of 129 dB.

The rugged enclosure is made from birch plywood and features a durable polyurea coating. The side of the speaker features two combo XLR-1/4" inputs and XLR-thru outputs, as well as two powerCON power connectors for daisy-chaining to other monitors. The second generation DynX DSP provides four application presets, a 3-band EQ, tunable notch filter, and an alignment delay. The other side of the speaker features a 35mm pole socket for raising the speaker on a stand to be used as a main PA. The MON 15 A G3 ships with a powerCON power cord.

Compact High-Performance Stage Monitor    Class-D Power Amp: 300W RMS / 1200W Peak    Coaxial Design: 1" Titanium HF Driver    15" Woofer with 3" Voice Coil    CD Horn with 50 x 90° Dispersion    DynX DSP with 3-Band EQ, Filter, Delay    Four Application Presets    Two Combo XLR-1/4" Inputs + XLR Thru    powerCON Power, Speaker Stand Flange    Includes Power Cord

• Compact high-performance stage monitor with top-of-the-range technologies
• Class-D power amplifier with 300 W RMS / 1200 W peak and 129 dB max. SPL
• Coaxial design for true point source with a 1" titanium-diaphragm HF driver
• 15" woofer with 3" voice coil
• Optimized, practical radiation pattern due to 50° x 90° CD horn
• DynX DSP (Gen.2) for distortion-free sound even at maximum volume
• 3-band EQ, notch filter, 4 application presets and delay function
• PowerCON compatible loop-through professional power connection
• 35mm speaker stand flange for FOH applications
• Durable polyurea coating and heavy-duty front grille

The highly efficient Class-D power amp delivers 300W RMS. The peak power of 1200W, which can be called up at short notice, guarantees a dynamic, assertive sound image.

The next monitor can be supplied with power via a second powerCON compatible connection. Thanks to the two XLR outputs, you can also daisy-chain the audio signal to a neighboring stage monitor.

Heavy-duty birch plywood

• The enclosures are made of heavy-duty 15mm birch plywood and coated with durable polyurea. Thus, they reliably withstand many years of hard use on the road

Steel front grille

• The extra-strong, torsion-resistant steel grilles effectively protect the speakers

Two die-cast aluminum handles

• The two cast aluminum handles, homogeneously integrated into the overall appearance, enable the best possible handling onstage

Recessed connections

• The connections and controllers are recessed in steel trays and are thus optimally protected against damage

Noiseless heat sink

• An elegantly designed heat sink on the back of the monitor provides fanless and thus noiseless cooling of the power electronics

PRESET: Selection of the loudspeaker preset

• FULLRANGE
• FLAT
• MONITOR
• MON HPF

3-Band EQ

• HIGH EQ Setting the treble frequencies from -10 dB to +10 dB
• MID EQ Adjusting the center frequencies from -10 dB to +10 dB
• LOW EQ Adjusting the bass frequencies from -10 dB to +10 dB

Notch EQ

• NOTCH GAIN Narrow band reduction of a feedback frequency 0 to -12 dB
• NOTCH FREQ Setting the feedback frequency from 500 Hz to 10 kHz

Alignment Delay

• DELAY Time delay of the audio signal in 0.1m steps up to 10m (0m = OFF, display in meters and feet)

Related Questions and Answers

Q: 1. have anyone tried to carry a moza air2 gimbal or anyother of the same size here? the moza backpacks seem not to good

A: We do not feel this would be a good fit for the Moza Air 2.

Q: 2. will this hold a 16 inch MacBook Pro?

A: Yes this bag can accommodate a 16" MacBook Pro.

Q: 3. I know that this is ment for Mirrorless systems's, but would this hold a Canon 6D, 16-35 f4, 50mm f1.8 stm and an 85mm f1.8 usm lenses, in addition to a GX7, 12-35f 2.8, 35-100 f2.8 plu a couple of small primes?

A: That should all fit if you configure it right. This backpack says its designed for mirrorless systems but I've definitely thrown DSLR systems in there with plenty of room left to spare.

Q: 4. can you adjust/move/remove all its dividers or are there some that are fixed?

A: you can adjust,move,or remove any of its dividers

Q: 5. Will this pack fit comfortably as a day/travel pack for a 5'3" woman?

A: Yes this would be quite a comfortable day pack and travel option for someone who is a 5'3" woman. The straps are padded nicely to provide comfortable carrying when bag is heavily loaded and has easy access to equipment. .

Q: 6. Is there a way to tuck or attach the excess strap on the shoulder straps after adjusting?

A: I do t think so. You could cut the excess off and fix the end so it won't fray

Q: 7. Can a 6DmII camera and a 70-200 canon lens fit in this bag along with a 600flash, maybe another lens and accessories (magmod sphere, filters), chargers, batteries?

A: Yes, without battery grip.

Q: 8. What is the size of water bottle can fit ?

A: This bag can hold up to a medium water bottle.

Q: 9. will this hold a sony 200-600 with camera attached?

A: Yes, the Think Tank Urban Approach 15 Backpack can hold the Sony 200-600mm lens mounted on a Sony camera.

Q: 10. How deep is the interior of the bag? I want to be able to put my OM Systems OM-1 MkII with battery grip in it without removing the grip. Need 6 inches of depth.

A: The interior depth of the Think Tank Photo Urban Approach 15 Backpack for Mirrorless Camera Systems (Black) is 5.3”.