Octamas Swiss Cage Full Power I/O Set For Red Komodo

Octamas Swiss Cage Full Power I/o Set For Red Komodo

Product Code: eq169160
Availability: In Stock

$11,115.00 $15,227.55

Qty

14 reviews Write a review

Description
Reviews (14)

The OCTAMAS SWISS Cage Full Power I/O Set for RED KOMODOfrom OCTAMAS SWISS Cage Full Power I/O Set for RED KOMODOcontains all recommended accessories for professional rigging, including power distribution. The SWISS cage universe follows industry norms, allowing advanced and complex setups and switching and sharing vital components between camera systems.

For Pro Rigging and Power Distribution LWS, ARRI & Other Industry Standards Top/Bottom Interface Plates Dovetails, Reducers, Cables & Much More

Parameters
Support Type	Cage, Handheld Support, Rod Support System
Grip Type	Topside Handgrip
Camera Compatibility	RED KOMODO, RED KOMODO-X
Mounting
Rod Standard	15 mm LWS / 60 mm Spacing
Battery Plate Type	No
Accessory Mounting	Multiple ARRI Anti-Twist 3/8"-16 Female Thread Multiple 3/8"-16 Female Thread Multiple 1/4"-20 Female Thread
Camera Mounting	1/4"-20 Male Screw, 3/8"-16 Male Screw
Tripod Mounting	1/4"-20 Female Thread, 3/8"-16 Female Thread, ARRI Dovetail
Rod Ports	2x 19 mm Rod Port, 4x 15 mm Rod Port
Shoe Mounting	No
Rosettes	2x ARRI Rosette w/ M6 Female Thread
General
Materials	Aluminum (7075)
Dimensions	2.2 x 5 x 1.3" / 55 x 127 x 33 mm (SC Top Interface Plate) 3.1 x 2.7 x 0.4" / 80 x 68 x 10 mm (SC Dovetail Plate 80) 4.1 x 1.5 x 1" / 104 x 38 x 25 mm (SC 15mm Rod Mount Interface) 5.9 x 1.9 x 2.6" / 150 x 48 x 65 mm (Top Handle Pro) 3.9 x 3.5 x 0.3" / 98 x 89 x 7 mm (SC Riser Plate) 5 x 3.9 x 1" / 127 x 98 x 26 mm (SC Bottom Interface Plate Power) 5.1 x 3.9 x 1.3" / 130 x 98 x 34 mm (SC 15mm Interface Bridge Plate) 5.5 x 2.7 x 0.4" / 140 x 68 x 10 mm (SC Dovetail Plate 140) 1.1 x 2.4 x 0.8" / 29 x 60 x 21 mm (Lens Mount Adapter Support Bracket) 2.4 x 1.8 x 0.8" / 60 x 45 x 20 mm (19mm Rod Mount) 2.4 x 1.2 x 1.3" / 60 x 30 x 34 mm (19mm Rod Mount 90°) 0.7 x 0.7 x 0.8" / 19 x 19 x 21 mm (19mm to 15mm Reducer) 2 x 0.9 x 0.4" / 52 x 23 x 10 mm (SC Mounting Wings Short Left/Right Pair) 4.1 x 1.2 x 1" / 105 x 30 x 25 mm (Mounting Cheese Stick) 2.4 x 3 x 0.7" / 61 x 77 x 18 mm (Mounting Cheese Plate 1) 1.3 x 0.8 x 0.7" / 32 x 20 x 18 mm (Mounting Cheese Plate 2) 1.4 x 1.1 x 0.3" / 35 x 27 x 7 mm (Mounting Cheese Plate 3) 1.1 x 0.8 x 0.3" / 27 x 20 x 7 mm (Mounting Cheese Plate 4) 0.8 x 0.8 x 0.5" / 21 x 20 x 12 mm (⅜" Thumb Screw - 12mm) 6.3 x 2.6 x 0.6" / 160 x 67 x 15 mm (SC Side Interface Plate 90°) 1.6 x 0.4 x 0.2" / 40 x 10 x 4 mm (SC SIP 90° Adapter) 2.4 x 1.3 x 1.1" / 60 x 32 x 29 mm (Rosette Offset Adapter)
Weight	5.1 oz / 145 g (SC Top Interface Plate) 3.5 oz / 100 g (SC Dovetail Plate 80) 3.9 oz / 110 g (SC 15mm Rod Mount Interface) 7.1 oz / 200 g (Top Handle Pro) 4.2 oz / 120 g (SC Riser Plate) 11.6 oz / 330 g (SC Bottom Interface Plate Power I/O) 11.8 oz / 335 g (SC 15mm Interface Bridge Plate) 6.2 oz / 175 g (SC Dovetail Plate 140) 0.3 oz / 9 g (Lens Mount Adapter Support Bracket) 1.8 oz / 50 g (19mm Rod Mount) 1.9 oz / 55 g (19mm Rod Mount 90°) 0.5 oz / 15 g (19mm to 15mm Reducer) 1.2 oz / 35 g (SC Mounting Wings Short Left/Right Pair) 1.6 oz / 45 g (Mounting Cheese Stick) 1.6 oz / 45 g (Mounting Cheese Plate 1) 0.5 oz / 15 g (Mounting Cheese Plate 2) 0.5 oz / 15 g (Mounting Cheese Plate 3) 0.4 oz / 10 g (Mounting Cheese Plate 4) 0.3 oz / 9 g (⅜" Thumb Screw -12mm) 6 oz / 170 g (SC Side Interface Plate 90°) 1.5 oz / 42 g (SC SIP 90° Adapter) 2.8 oz / 80 g (Rosette Offset Adapter)
Interface	1x D-Tap 1x Fischer 3-Pin (12 VDC, Trigger) 1x LEMO 2-Pin (Power Input) 2x LEMO 2-Pin 0B (AUX, Power) 1x LEMO 4-Pin 00B (RED Control) 1x LEMO 5-Pin 0B (Timecode, Genlock) 2x LEMO 9-Pin 0B (RED EXT Input/Output)

SWISS cage Top Interface Plate for RED KOMODO/KOMODO-X
SWISS cage 3.1" Dovetail Plate
SWISS cage 15mm Rod Mount Interface
Top Handle Pro
SWISS cage Riser Plate for RED KOMODO
SWISS cage Bottom Interface Plate Power I/O for RED V-RAPTOR/KOMODO/KOMODO-X
4" 9-pin 0B RED EXT to 9-pin 0B RED EXT Cable
12" D-Tap to 2-pin OB AUX/PWR Cable
SWISS cage 15mm Interface Bridge Plate
2 x 5.5" SWISS cage Dovetail Plates
Lens Mount Adapter Support Bracket for V-RAPTOR/KOMODO/KOMODO-X/DSLM
19mm Rod Mount
19mm Rod Mount 90°
2 x 19 to 15mm Reducers
2 x SWISS cage Mounting Wings Short Left/Right Pairs
Mounting Cheese Stick
Mounting Cheese Plate I
Mounting Cheese Plate II
Mounting Cheese Plate III
Mounting Cheese Plate IV
2 x 0.47" (12mm) 3/8"-16 Thumbscrews
SWISS cage Side Interface Plate 90°
SWISS cage SIP 90° Adapter for ARRI ALEXA Mini/RED KOMODO/KOMODO-X/DSLM
2 x Rosette Offset Adapters

Related Questions and Answers

Q: 1. Which genlock and timecode cables work best?

A: The Tilta Advanced Power Distribution Module for RED KOMODO (Black, V-Mount Type II) will take any SDI BNC time code cable. Which cable is dependent on the particular time code generator.

Q: 2. Can anyone confirm if the Control port on this version is functional? I've seen reports that early models had issues with that.

A: Tilta confirms that the control port works on the Tilta Advanced Power Distribution Module for RED KOMODO . The Module features the following ports: (1) 14.8V P-Tap Port (2) 14.8V 2-Pin LEMO Port (1) 3 Pin Fischer R/S Port (1) Timecode Port (1) Red CTRL Port (1) Genlock Port (1) 5V USB Port

Q: 3. Whic battery charger works with the red volt battery?

A: It is compatible with any charger that accepts Canon BP 900 series batteries. A great example of a compatible charger is the Watson Duo LCD Battery Charger Kit with 2 x BP-900 Series Battery Plates (B&H # WADLC2PK).

Q: 4. What is the height of the head when it is positioned for horizontal shooting?

A: The Arca-Swiss Monoball P1+ with ClicPan and Classic Receiver weights 1.3 lb / 585 g on horrizontal, or vertical position.

Q: 5. what is the diameter of the top part? The circle the clamp its on

A: According to the manufacturer, the base that holds the quick release clamp on the Arca-Swiss Monoball P1+ would measure 2.95 inches.

Q: 6. Will the runstop and timecode ports still work if there is no battery connected? (with camera powered through the 2pin lemo)

A: No, the Tilta Advanced Power Distribution Module for RED KOMODO (Black, V-Mount Type II) will need to be powered via a v-mount battery in order for the ports to operate.

Q: 7. Is this battery the same size as the canon BP-955 or the canon BP-975?

A: The Canon BP-975 batteries are 7350mAh and these are 6300mAh.

Q: 8. How long does it take to fully charge a depleted battery?

A: That will depend on which charger you use and the current it can provide. Maximum Time to Full Charge (Hours) = Battery Capacity (mAh) / Charge Rate Current (mA)

Q: 9. What is a better battery...The RedVolt at 7.2v 6300mAh or the Canon BP-955 7.4V, 4900mAh?

A: Both are high quality battery options. The Redvolt however is more powerful at 6300mAh.

Q: 10. How long can I record with one battery?

A: Roughly 2 hours.

Matt	09/08/2024
[Aluminum (7075)] This is great for adding some mounting options to your Komodo without having to add a full cage. 5

steve	29/07/2024
[Aluminum (7075)] they totally work as nato rails and love the rosette feature. the paint does chip off rather quickly unlike the small rig products which seem more durable 5

James	16/07/2024
[Aluminum (7075)] I've worked with a lot of different rigs for Komodo Cameras. This is by far the best one. 5

brian	18/06/2024
[Aluminum (7075)] Great cage for the Komodo. I needed a cage that would work easily with the expansion module attached. The bottom of this cage is it’s own separate piece and easy to remove. It works well with the expansion module. Plenty of 1/4 20’s all around to mount accessories to. Two thumbs up... 5

Jean-Gabriel	08/06/2024
[Aluminum (7075)] good product form good brand 5

Raoul	03/06/2024
[Aluminum (7075)] This is a required piece if you will be pulling focus. All of these lens adapters torque and move the lens around. This minimizes if not eliminates that problem. Great investment! 5

Jonathan	03/06/2024
[Aluminum (7075)] Exactly what I needed. Love the design and it's well built and durable. No issues or complaints 5

Jonathan	25/05/2024
[Aluminum (7075)] I bought this to use on my Komodo with the Metabones Cine Speedbooster (EF to RF), and it has a slight gap between this and the lens support on the speedbooster. I remedied this by sticking two very small washers in the gap (one on each side so four total) and they fit very snugley which helps take up the gap and makes this support very sturdy. Just something to note if you plan to buy it, you will need to fill the gap with something. Would not recommend using it without something to support, otherwise your lens mount could get damaged over time. 5

Matt	23/05/2024
[Aluminum (7075)] This is perfect if you don't want to add a full cage to your Komodo. WIth the combination of 1/4, 3/8, and a few Arri pin locking mounts, there's plenty of options for mounting monitors, handle, mic, etc. 5