Get your next small build off the ground with the uniquely designed Corsair 2000D RGB AIRFLOW PC Case. Sporting a stand-up design, you get a space-saving design with ample ventilation to keep your components cool while you play your favorite games.

With it's tower-like design, the 2000D AIRFLOW has enough room to support Mini-ITX motherboards, SFX power supplies, and graphics cards up to 14.3" long with the three expansion slots. Three 2.5" drive bays are available for solid-state drives, allowing you to download and save your games and media. Connect your peripherals such as controllers, mice, keyboards, and external drives with two USB-A 3.2 Gen 1 and a USB-C 3.2 Gen 2 ports, giving you up to 5 and 10 Gb/s data transfer speeds, respectively, and support for resource demanding devices. Experience enhanced cooling capabilities and style with three pre-installed 120mm RGB fans that not only keep your thermal levels in check, but also allow you to express your personality.

Mini-ITX Motherboard Support    Steel Frame    3 x 2.5" Drive Bays    3 x Expansion Slots    2 x USB-A 3.2 Gen 1, 1 x USB-C 3.2 Gen 2    3 x 120mm RGB Fans Pre-Installed    Support for Liquid Cooling Systems    SFX Power Supply Support    Supports GPUs up to 14.3"    Removable Side Panels

Utilizing steel mesh side panels, the 2000D RGB AIRFLOW optimizes airflow from all directions for enhanced cooling capabilities. This also enables you to easily install various components from the motherboard, power supply, graphics card, and manage your cable routing with ease.

The front and rear panels of the 2000D RGB AIRFLOW can be equipped with up to three and two 120mm fans, respectively, enhancing your cooling capabilities. The side panel can hold either three 120mm fans or two 140mm fans. If you prefer liquid cooling, you can install a 240mm radiator on the rear panel while the side panel supports 240 and 360mm radiators. Three 120mm RGB fans are pre-installed with an additional 120mm exhaust fan located at the top.

Related Questions and Answers

Q: 1. Will this case hold a Tamron 24-70mm 2.8 lens? thank you.

A: It would be a very tight fit with this case. I would instead suggest the Lowepro Lens Case 11 x 14cm for your lens. http://bhpho.to/1u6oszu

Q: 2. which dimension, 6 or 4 1/2, is the diameter?

A: The interior diameter of the Ruggard Lens Case 6 x 4.5" (Black) is 4.5".

Q: 3. Can smaller Godox tube lights like the TL-60 and TL-30 fit in this case?

A: The Godox CB47 Carry Bag is specifically designed for use with the Godox TL120 RGB Tube 4-Light Kit. Unfortunately, I could not find confirmation if the Godox TL-30 or TL-60 lights would fit inside the above kit. As such, I would instead recommend the Godox Light Kit Carrying Bag for TL60 Four-Light Kit, B&H # GOTL604LKBAG, for the Godox TL-60 lights, and the Godox TL30 4-Light Kit Bag, B&H # GOCB22, would be compatible for use with the Godox TL-30 lights.

Q: 4. I am looking for the proper fit for a Nikon 55-300 zoom telephoto lens. I tried the Ruggard 6.0(6.5) x 4.5, and that is tall enough but too wide. Would the 6 x 3.5 work better? I think it would be better for the width, but I am not sure it is tall enough.Thanks, Bruce B

A: The Ruggard Lens Case 6.0 x 3.5 would offer a slightly tighter fit with the Nikon AF-S DX NIKKOR 55-300mm f/4.5-5.6G ED VR Lens in terms of width and would be tall enough as well.

Q: 5. Can be used for canon 85 mm f / 1.8?

A: Yes you can

Q: 6. Will Canon RF 70-200 F/2.8 fit? I see the interior width of the case is 3.5”, same as width of the lens. Will that be too snug?

A: The lens will fit without the lens hood and tripod collar.

Q: 7. The dimensions - is it inside or outside dimension?

A: Exterior Dimensions ø: 5.0 x H: 7.5" / ø: 12.7 x H: 19.1 cm Interior Dimensions ø: 3.5 x H: 6.0" / ø: 8.9 x H: 15.2 cm

Q: 8. Would Canon CN-E 35, 50, 85mm fit in this pouch? Thanks

A: Yes, it will fit. the 3 Canon cine lenses you mention have the same dimension 4.66 x 4.66". The interior dimensions of the Ruggard Lens Case 6 x 4.5" (Black) are ø: 4.5 x H: 6.5".

Q: 9. Will this bag fit a Nikon Z 24-200mm lens?

A: Yes, the Ruggard Lens Case 6 x 4.5" can accommodate the Nikon NIKKOR Z 24-200mm f/4-6.3 VR Lens (B&H # NIZ24200).

Q: 10. Hello...will this be capable of holding a TS-E 24 mm ii lens? Are there other options like Lenscoat lens pouch that can fit this lens?

A: This case is more than capable of holding any lens that does not exceed the specified dimensions. I amusing the 12 long version of this product for a tele zoom I purchased that did not come with a travel bag. I have had it out in the rain, and there was no damage to the contents inside. It is nicely padded and comes with handy loops and straps and velcro loops to attach to a backpack or other luggage. Based on my experience, it is my opinion that this is a good value for the $, and provides more that adequate level of protection for my investment. Just verify that the internal dimensions are larger than the lens you intend to use it for. And for further piece of mind, I wrap the narrow end of my tele zoom with a piece of bubble wrap and/or foam to keep it centered in the case. Hope this helps.