Add a high-quality, multifunction PTZ camera to your conference room, event space, education environment, or house of worship with the gray Medical-Grade Computer Roll Cart with PTZ Camera & Speakerphonefrom BZB Gear. The camera features a 1/2.7" CMOS sensor and outputs up to 1080p video over HDMI, SDI, USB 3.0, USB 2.0, or uses RSMP/RTSP protocols to stream video and audio to the Internet.

The camera supports uncompressed video transmission over MJPEG, H.265, and H.264 compression formats. When connected to the Internet, this IP camera allows you to control PTZ actions and monitor the surveillance area from a remote location via a Web browser. This provides you with several advantages like reduced integration costs, easy remote production and engineering, and lower cost for multiple location systems. You can also manage the unit via IP using VISCA-over-IP/ONVIF or by using its RS-232/RS-485 serial port with a separately available serial PTZ controller. You can power the camera with the included power adapter, or you can utilize your existing PoE (Power-over-Ethernet) LAN to save cable runs.

Equipped with a 10x optical zoom and a 12x digital zoom, this PTZ camera enables you to zoom in on activity in the monitoring area for a closer look, and it has a wide field of view for capturing large meeting rooms. It features an RJ45 Ethernet output that can transmit up to 1080p video to any RTSP/RTMP streaming network so you can broadcast live directly to internet streaming sites. The camera also supports 3.5mm stereo audio input, allowing you to capture and embed AAC or G711 audio with the video signal.

Medical Cart with 4-Wheel Base    10x PTZ Camera with Full HD Video    Speakerphone System with 360° Audio    Efficient Cable Management    Aluminum Alloy, Sheet Metal & ABS Build

Remote learning, lectures, webcasting, video conferencing, remote training, remote medicine, interrogation, and emergency command systems

Built-in VISCA, PELCO P/D, ONVIF with support for RS-485, RS-232, LAN (VISCA over IP), and IR remote control

3G-SDI, HDMI, and USB 3.0 (with cables 10' or shorter) as well as LAN IP streaming using TCP/IP, HTTP, DDNS, UDP, RTSP, RTMP, SMTP, UPnP, or SNMP protocols

Ultra-quiet pan/tilt design, horizontal ±178 degrees, vertical -30~+90° rotation, high-precision stepper motor drive with 0.01° accuracy

Built-in 3.5mm analog audio input interface and G.711, G.722, G.722.1, G.728, and G.722.1C AAC audio encoding (supports line-in audio function through IP stream only)

Further reduce noise while ensuring image sharpness

Easy to enter Menu for preview and setting changes

Advanced video image processing & full HD 1/2.7" CMOS sensor, maximum resolution up to 1080p60

Supports image mirror and flip function with ceiling, wall, tripod, and desk-mounting installations

The IR remote allows for 9 presets and serial or IP control

Related Questions and Answers

Q: 1. How exactly do you fill the tires?

A: With an air pump. Either by hand or via a compressor.

Q: 2. Is this cart flight ready?

A: Dimensions for the Inovativ Apollo 40: Collapsed: 40H x 26W x 7.5L Assembled: 40H x 26W x 40L Weight: 102lbs. (With EVO Wheels) / 112 lbs. (With NXT Wheels)

Q: 3. Can beach rolly cart be used to carry a kayak on the top? (same way as the Eckla Rafty) ?

A: The maximum weight capacity while in motion is 176 pounds while in motion. As long as it's under the weight limit, you will be fine.

Q: 4. Can this be used on uneven terrain such as dirt trails I need something to haul my camera equipment on field trips?

A: This would be more suitable for use hard surfaces.

Q: 5. What are the "composite" corners made of? I'm concerned that plastic corners are prone to breaking in transport and use on set.

A: The corners of the DigitalFoto Solution Limited Lightweight Cinemech Video Production Camera Cart (Medium), BH #DILBCM8, are a composite of tough plastic copolymers that are designed to be extremely rugged. They are not prone to breakage in everyday use or transport.

Q: 6. How to open?

A: When collapsed, the cart is held together with two bungee cords with hooks. To open, unwrap the bungees, which allows the rear cart wheels and base plate to open to transport position. Lock the rear cart wheels with sliding tube and extend the telescoping cart handles by depressing black button on frame. Load your material onto base plate and secure with bungees by attaching hooks in holes at top of telescoping handle.

Q: 7. How much are the hydraulic brakes?

A: The current pricing for the hydraulic hand braking option is not available. Please contact the manufacturer directly for details: INOVATIV:5600 Ayala AvenueIrwindale, CA 91706PHONE626.969.5300

Q: 8. Can you control this with PTZOPTICS iOS app?

A: We are only aware of the PTZ Optics iOS App workng wth PTZ Optics cameras.

Q: 9. Does it include handle?

A: No it does not. You need to buy the handle extra. Its simply a tube with grips that slides thru the top part of the extended back. Hard to use kart without it and slide in and one screw to install. This Kart is amazing and I cant live without it.

Q: 10. Is this one easy to pull up a flight or two of stairs?

A: Yes. Those back wheels act as a stair climber. You would have an easier time pulling up a flight or 2 of stairs with this cart.