The A320H from MiNE Media is a multi-stream video decoder with 5G bonding and network aggregation capability. This compact and versatile device enables frame-synchronized decoding of four to sixteen channels of IP video signals, which can be output to HDMI and IP formats, including SRT, RTMP, and RTSP. Using the four HDMI outputs on the back, the A320H can output three simultaneous UHD 4K60 signals using its single HDMI 2.1 and two HDMI 2.0 ports, and an additional 1080p60 signal over its HDMI 1.4 port. If using only a single channel, the A320H can output 8K60 over its HDMI 2.1 port. With its multiple network interfaces, the A320H can aggregate video streams from bonding servers and direct RTMP and SRT stream inputs using 5G, dual Gigabit Ethernet ports, dual-band 2.4/5.8 GHz Wi-Fi 6, as well as up to two more 4G or other wireless connections using the two USB-A ports for 4G dongles or network adapters. There is also an SD card slot for recording videos in MP4 format up to UHD 4K60 with support for up to 512GB cards. Control the decoder using the integrated 2" screen for basic parameters, a browser interface, or the MLive app for Android or iOS devices to provide access to firmware updates and its complete feature set.

4-16 Decoding Channels    1 x 8K60 Output via HDMI 2.1    3 x UHD 4K60 and 1 x 1080p60 Outputs    SRT, RTMP, and RTSP IP Output Formats    Dual-Band Wi-Fi 6    2 x USB-A Ports for 4G/Network Adapters    2 x Gigabit Ethernet Ports    4 x 5G Antennas, 2 x Wi-Fi Antennas    2 x 5G Nano SIM Slots    MLive App for iOS and Android

Related Questions and Answers

Q: 1. When switching between NDI sources, will it switch seamlessly, or will it go to black while switching?

A: Yes. As long as a good internet connection is in play an end-user can expect to receive a seamlessly experience using the hardware.

Q: 2. Does it accept 3G SDI level A, level B or both?

A: The MiNE Media R8 4G Bonding Video Switcher supports level A.

Q: 3. I have an ATEM Mini Pro on order and have to get 3 x PTZ cams for our church (when they are back in stock!). I like the idea of the PTZ Optics NDI cams but how would I get their o/p into the HDMI inputs of the Atem Mini Pro?

A: this converter could be used to convert the NDI signal from the camera to an HDMI signal that can be fed directly into the ATEM Mini pro switcher

Q: 4. How do you access the settings of the device?

A: The unit is driven by a web end-user interface.

Q: 5. Can I use an NDI app on my phone to send video to this device?

A: no this is NOT a wireless NDi device and you can not use an NDI app to send video to this device but if you have an HDMI video out from your mobile device you can connect the HDMI signal to this and it will convert the HDMI signal to NDI

Q: 6. Can this decoder receive streams from JVC GY-HC500 camera?

A: Yes it can.

Q: 7. Does this unit work with any sort of Cloud interface where it can receive a signal from NDI sources in a completely different location? (Similar to Birddog Cloud)

A: no this converter will only work with NDI locally

Q: 8. Can someone confirm that this device can already support NDI HX? Magewell website indicates that NDI HX decoding is now supported I guess via firmware update.

A: The Magewell Pro Convert NDI to HDMI does support full NDI, NDI|HX1, NDI|HX2, and NDI 4.x. decoding as long as the user has the latest firmware V1.1.595 installed.

Q: 9. this product handles only one NDI feed at a time? Can I use it to deliver two feeds at the same time or do I need two of these units.

A: Hi, this device handles one source feed at a time.

Q: 10. Does this device output over hdmi 3840x2160 30 fps?

A: Yes, the Magewell Pro Convert NDI to HDMI Decoder does output 3840 x 2160 30 fps over HDMI.