Designed as components for your THANOS-PROCINE camera support system, the Dual Arm Support Vest for THANOS-PROCINE by DigitalFoto Solutionkit consists of a dual shock-absorbing arm and a padded vest capable of supporting your cine camera configuration. An 11 to 77.2 lb load capacity can accommodate ARRI ALEXA 35 and DJI Ronin 4D cameras with ease.

The arm features a 16mm front pin that secures the separately available carbon fiber post sled. Adjust the tension of the arm with the included adjustment key to achieve your desired resistance. The vest can be adjusted at the chest and waist and has a maximum waist circumference of 51.2". Included with the kit is a soft carrying case to take it on the go.

11 to 77.2 lb Load Capacity    Dual Arm with 16mm Front Pin    Padded Support Vest    Supports Waists up to 51.2"    Arm Tension Adjustment Key    Includes Carrying Case

ARRI ALEXA 35, ARRI AMIRA

Sony FX6

DJI Ronin 4D with Flex Unit

Related Questions and Answers

Q: 1. Is this compatible with volt systems?

A: No, the DigitalFoto Solution Limited THANOS-PROCINE Stabilizer System (Gold Mount) is not compatible with the Steadicam Volt systems.

Q: 2. All this work with black magic ursa mini pro 4.6?

A: no it will not. the camera will exceed the max payload supported

Q: 3. I just purchased this, after using it for a bit is there something I can purchase that can allow me to tilt the gimbal without having to tilt my body? I'm using the RS3.

A: The DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm for DJI RS 2, RS 3 & RS 3 Pro, and Other Handheld Gimbals has no method to tilt the arm or post. With this system, tilt is to come from the gimbal, not the arm and post.

Q: 4. is thia compatible with the zhiyun crane 3 lab?

A: Yes, this support vest is compatible with the following hand held gimbals. Moza Air 2, DJI Ronin-S, DJI Ronin-SC, Zhiyun CRANE 3S, or any single-handle gimbal with a 3/8"-16 or 1/4"-20 mounting thread

Q: 5. Can the Panasonic AG-DVX200 fit in this setup?

A: That depends on the gimbal that you attach to this set up. this product is designed to work in conjunction with smaller motorized stabilizers which do not work well with Camcorders like the DVX200. It is possible that it will work if you also get the Crane 3S Pro however we recommend mechanical stabilizer systems such as the Steadicam Aero Stabilizer with A-15 Arm, Vest, and 7" Monitor (No Battery Mount)

Q: 6. Is this the exact same vest that comes with the DF DIGITALFOTO Thanos SE?

A: No, the vest that is included with the DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm for DJI RS 2, RS 3 & RS 3 Pro, and Other Handheld Gimbals is not the same as the DigitalFoto Solution Limited THANOS-SE Compact Tiltable Universal Single-Handle Gimbal Support Vest System.

Q: 7. Hello. Do you know if it has any limit in the size operator?

A: No not really. The support vest is fully adjustable to fit a wide range of body sizes. Combined with the arm, the vest system supports rigs that weigh 5.5 to 19.8 lb.

Q: 8. How would I connect a monitor with the most convenient viewing for the filmer?

A: We highly suggest the following two solutions. Pearstone 11" Articulating Arm BH #PEAA83 • MFR #9041660 https://bhpho.to/37J7uo1 Pearstone Articulating Arm and Mini Clamp Kit BH #PEAA83K • MFR #AA-83K https://bhpho.to/3Kimw1j

Q: 9. is it compatible with DJI Ronin RS2 Pro combo and Canon R5c?

A: Yes, the DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm still supports the following gimble models: DJI RS 2, RS 3 and, RS 3 Pro. Also, the Canon R5C can balance and be used with the DJI RS2 gimbal.

Q: 10. will it work with the Ronin Rs3 Pro?

A: Yes, the DigitalFoto Solution Limited THANOS-PRO will support and work with the DJI RS3 Pro gimbal.