The OConnor 1040 Fluid Head 30L Tripod Mid-Level Spreaderis a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn or think about the differences between fluid heads. The head supports 45 pounds' worth of camera and accessories at a center of gravity (COG) 5 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own and helps the camera to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1040 is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1040 extremely versatile and suitable for use with heavy ENG-style cameras all the way down to lightweight cameras, while maintaining the same operational feel.

The 1040 features a large Euro-style quick release plate. The QR plate allows you to mount and remove the camera by lifting straight off the head and not having to slide it in from the back. The fluid head is able to tilt 90 degrees forward and back, allowing you to tilt the camera straight down and then straight up, all in the same shot. The camera also features independent drag controls and locks for both pan and tilt. The included 100mm ball base is removable and can be replaced with other available bases. The included pan handle can be attached to either side of the the fluid head, utilizing the mounting rosette on either side of the head.

100mm Ball Head Supports up to 45 lb    Dual-Stage Carbon Fiber Tripod    Max Height of 69.1", Mid-Level Spreader    3 Rubber Feet, Soft Carrying Case

The 1040 supports cameras and accessories up to 45 pounds at a COG of 5 inches. This is what the counterbalance can cancel out while keeping the head neutral in any position in the tilt range. The sinusoidal counterbalance supports lighter cameras and features near-zero balance error. The stepless counterbalance can be set all the way down to zero to accommodate lightweight cameras.

The 1040 provides a very wide tilt range of 90 degrees forward and and rear tilt, while supporting camera packages weighing up to 45 pounds (5" COG).

The head features independent controls on the pan and tilt for lock and drag. The pan and tilt locks are easy to operate. Both controls match well with the controls of OConnor's larger 2575 and 2065 heads, making it easy for operators to move between the heads without having to relearn each head.

The included 100mm ball base provides a side support base that easily accommodates the heavy loads this fluid head can support. The ball allows you to quickly level your shot without having to adjust the tripod legs. The ball base is also removable and available options include a Mitchell, 150mm ball base, 4-bolt, 3-bolt, or quickfix.

Related Questions and Answers

Q: 1. Can I mount a Sony A7iii on the back of the plate without it interfering with my lens operation or mount it near the front of plate without plate protruding too far off back of camera to get face close enough to viewfinder after quick release?

A: The A7iii should fit fine on the Sachtler Ace M System Black Edition with Tripod & Mid-Level Spreader (75mm Bowl) if screwed into the back of the plate not the forward.

Q: 2. Can the head from the Sachtler Ace M be put on a different tripod base?

A: As far as i can see, Sachtler heads can do both bowl and flat base mounting

Q: 3. Hi, can I use this ace m fluid head on a sirui monopod?

A: We're afraid not. The head in this tripod only connects to a 75mm bowl. You will not be able to use it on a Sirui Monopod.

Q: 4. Will this tripod work well with an a7rii without additional accessories?

A: yes, it will.

Q: 5. How much does this tripod weigh?

A: The Sachtler Ace M Fluid Head with 2-Stage Aluminum Tripod & Mid-Level Spreader weighs 9.7 lb.

Q: 6. Can the 75mm bowl be removed?

A: Sorry, no, it cannot. If you did remove it, the top of the legs would not be connected to anything and you could not mount a camera. However, you can use a Manfrotto 520BALL 75mm Half Ball. With this you can mount a flat base tripod head on a 75mm bowl tripod.

Q: 7. Which dolly is compatible with this model of Ace?

A: The Tether Tools Rock Solid Tripod Roller is a great option for this tripod, BH #TERSDL012. https://bhpho.to/3rasnN8

Q: 8. Can i use manfrotto plate to this tripod? i want to quick release to my manfrotto monopod and Glidecam HD2000!!

A: yes, plate of Manfrotto 502 or 504 will work

Q: 9. Is the any differences on the black edition besides color?

A: The features are the same with the Sachtler Ace M models. Only the silver color for some of the head controls are now black.

Q: 10. Is the bubble level ilumminated?

A: Unfortunately product does not list bubble level illumination.