Monitor a room or hallway with the Tapo C211 3MP Pan Tilt Indoor Wi-Fi Security Camera Night Visionfrom TP-Link. This unit uses a 1/2.8" sensor that captures 2304 x 1296 resolution video at 15 fps. An IR LED provides up to 30' of night vision. The camera features a 4mm fixed lens with 360° panning and 114° tilting ranges, along with a built-in speaker and microphone for two-way audio. A memory card slot supports microSD cards up to 512GB (available separately).

The Tapo app for iOS and Android enables remote management. Compatibility with Amazon Alexa and Google Assistant enables seamless voice commands.

2304 x 1296 Resolution at 15 fps    IR LED for Night Vision to 30'    4mm Fixed Lens    360° Panning, 114° Tilting    2.4 GHz Wi-Fi Connectivity    Two-Way Audio    Supports microSD Cards up to 512GB    Tapo App for iOS & Android    Use with Amazon Alexa & Google Assistant

Easy setup and management with Tapo app

Receive instant notifications via Tapo app for iOS and Android

Motion detection, person detection, and baby crying detection

Voice commands via Amazon Alexa and Google Assistant

Create customizable activity zones for alerts from pertinent areas

Privacy zone enables you to set customizable block zones to keep certain spaces from being recorded

802.11b/g/n Wi-Fi protocols

WPA and WPA2-PSK wireless security

128-bit AES encryption with SSL/TLS

Reset button

LED indicator for status

Optional Tapo Care cloud storage (subscription required)

Related Questions and Answers

Q: 1. Will this head work with Sirui PH-120 quick release plate?

A: Yes the base is Arca - Swiss compatible

Q: 2. Can this unit be adapter to a wireless controller or is there a next step up that would not brak the bank?

A: I would think that it would take quite a bit of work to make it work wirelessly. There are 2 cables that it uses. One for the pan motor & the other for the tilt motor. They send a varying voltage to the motors to control the speed they move the cameras.

Q: 3. is there a demo video?

A: There are no official videos. However, an internet search will show consumer videos regarding the head. Unfortunately, we cannot vouch for these videos.

Q: 4. What is the red pin under the Sirui logo for ?

A: That is a safety button. A loosened QR plate will not disengage unless the button is pushed.

Q: 5. Can i use it with a canon 500mm f4 is mk 1 lens canon 1d mk iv body 2x extender and sirui p424 monopod?

A: Yes, you can use ir.

Q: 6. Does this induro work with my benro monopod?

A: Yes, it will work with your Benro monopod.

Q: 7. Does the included quick release plate attach to the camera? Also, when the unit is in the vertical position, does the D810 go below the bottom of the unit? What is the distance of clearance if it does not?

A: I just purchased this pan head for my mono pod. I love it. As a matter of fact I liked it so much I just purchased another one for a gift for a friend. The quick release plate that comes with the unit attaches to the camera. It tilts and adjusts very smoothly.

Q: 8. Is this compatible with the Small Hd Focus 7 arm?

A: Yes, the SmallHD Pan Module for Tilt Arm could work with the SmallHD Focus 7 arm. However, the extra weight may cause some issue for example if you have a 702 with batteries, it's going to be difficult to prevent unwanted spin because of the weight.

Q: 9. Does this head actually tilt up to 90 degrees? Its photo shows the thread mark up to 90 but the hole doesn't seem to go far as 90 but stops around 75 in both directions. Just wanting to make sure since I need the head to tilt up to 90 degrees.

A: Yes it does tilt 90% in both directions and the head will rotate a full 360% if you tilt 90% with the camera for portrait orientation on a tripod or monopod you cannot tilt the camera up or down,,,,if you set up the camera to tilt up or down with the 90% now you cannot tilt 90% for portrait orientation,,,,not as versatile as a ball head and as I have mine on a monopod not a tripod and i have my camera on the head set up for 90% for portrait shooting i just tilt my monopod forward or back for up and down shooting..

Q: 10. Will the Sirui TY-60 plate work as well? If so, will the lock on the baseplate work with that plate?

A: is an arca type plate compatible, it will work.