Stewart Ws25G2133Cst10Hbx Wallscreen Studiotek 100 Projection

Stewart Ws25g2133cst10hbx Wallscreen Studiotek 100 Projection

Product Code: eq169819
Availability: In Stock

$10,171.35 $12,917.61

Qty

8 reviews Write a review

Description
Reviews (8)

The Stewart Filmscreen WS25G2133CST10HBX WallScreen 2.5 Series 51.25 x 122.75" Projection Screen is an ultrawide 2.40:1, 133" diagonal, fixed frame projection screen featuring Stewart Filmscreen's StudioTek 100 screen material that is a versatile, matte white finish for use in controlled lighting situations.

Featuring a 2.5" black Velux border and Stewart's snap system, the frame assembly and installation are fast and intuitive. The StudioTek 100 surface was designed to provide optimal light diffusion and a wide viewing angle with the flexibility to work with any style projector. This screen has a 1.0 gain with 15% ambient light rejection.

133" Diagonal | 2.40:1 Aspect Ratio StudioTek 100 Screen Material 1.0 Screen Gain 2.5" Velvet Covered Frame Works with All Lens Throw Ratios 15% Ambient Light Rejection

Key Specs
Front/Rear Projection	Front
Aspect Ratio	2.35:1
Gain	1.0
Tensioned	Yes
Type
Front/Rear Projection	Front
Style	Frame, Wall
Surface
Aspect Ratio	2.35:1
Finish Name	StudioTek 100
Gain	1.0
Tensioned	Yes
Whiteboard Surface	No
General
Overall HxW (Max)	56.2 x 127.7" / 1.4 x 3.2 m

Quick snap screen assembly perfectly aligns screen fabric to the frame for easy installation.

StudioTek 100 is a flexible, front projection, matte white screen material formulated to meet the strictest color and white field uniformity standards. This unity gain, reference material is an optimal diffuser and disperses light in a nearly perfect hemispherical distribution so that image brightness is virtually unchanged when viewed from any angle. The extremely wide viewing cone necessitates careful management of the reflected light in the viewing environment. StudioTek 100 is a great choice when ambient light can be controlled, and is exclusively made by Stewart to deliver enhanced focusing capabilities for detailed on screen content.

Related Questions and Answers

Q: 1. Can the PJ-BM projection attachment be used with one of the following light stands: IMLS96HABI, IMSLSAC12

A: The Nanlite Projection Attachment with 36 & 19° Lens Kit for Bowens Mount BH #NAPJBM3619 is about 15lbs. Both of the stands you ask about are rated for 22lbs. Depending on the light your going to use, the stands might be suitable.

Q: 2. What is the color gel that fits this holder? it is not SA-11C, which is too small and I have tried.

A: We do not have the Color Filter Holder for Projection Attachment BLP, BDP, MLP in house to measure since it is special order. But you can cut most larger gels to size with a pair of scissors such as the Pro Gel Vivid Colors Filter Pack 12 x 12" (30.5 x 30.5 cm) BH #PRPG12213 • MFR #PG12-213 or individual sheets of Rosco or Lee gels.

Q: 3. Can you only use this on nanlight light ? or any Bowens mount light ?

A: Yes. The units are designed and made for Nanlite FS Series and larger Forza monolight units.

Q: 4. Does it work on SL60IIBI Bi-Color LED ?

A: Yes, the Godox Projection Kit for S30 Focusing LED Light with Bowens Adapter will work with the Godox SL60IIBI Bi-Color LED Video Light; the Bowens adapter will allow you to place it on the light.

Q: 5. Can you use this with the Amaran 200x Bi-Color LED Light? Does it fit?

A: Yes, the Amaran 200X can be used with the Nanlite Projection Attachment for Bowens Mount with the 19 degree lens.

Q: 6. Is this a bowens mount for compatibility with godox studio strobes?

A: This unit has a special mounting ring for use with the Godox S30. It is not a Bowens mount.

Q: 7. What are the dimensions of the case for the PJ-BM kit with 36 & 19 Lenses?

A: The Nanlite Projection Attachment with 36 & 19° Lens Kit for Bowens Mount BH #NAPJBM3619 has a case that is 20.2 x 16.9 x 15.7".

Q: 8. Does this work with Aputure lights? Yes, both Bowens mount, but do the optics work? Still sharp?

A: No, the Nanlite Projection Attachment is designed and made for lights such as the Nanlite FS Series and larger.

Q: 9. Which c-stand would be recommended for the projection attachment and a Forza 500? Is BH #IMLSCT40MBK not strong enough?

A: If you just want to put the light and Nanlite Projection Attachment for Bowens Mount with 19° Lens on stand with out an arm / boom the stand with out the arm is fine, https://bhpho.to/413b3w9 . But use a sand bag on the bottom of the stand like, https://bhpho.to/3Sf01Qw

Q: 10. Can the GodoxAD600 be used with this?

A: The Nanlite Projection Attachment with 19 & 36° Lens Kit for Bowens Mount is made for LEDs and it may not have the space for the large bulb that the Godox AD600 uses. For a strobe with large bulb like the Godox AD600 I recommend the Godox BFP Flash Projection Attachment for Bowens BH #GOBFP or the Westcott Optical Spot by Lindsay Adler with 50mm f/1.4 Lens (Bowens) BH #WEO5014LB.

Jarrod	14/09/2024
[Frame, Wall] After a long hunt for the perfect portable screen for my backyard and cottage, I could not have been happier with this purchase. It is lightweight, easy to setup and take down, and the 1.3 gain screen is very bright with no visible lines during projection. When attaching the screen to the frame, the first corner buttons tend to pop off while stretching the screen to attach other corners, but I found that attaching 3 buttons on each corner at a time helps. I worry that the buttons will wear out over time making it more challenging to attach the screen, but for now it is perfect. If you are planning to use the screen at various locations, as I have, I definitely recommend the Plus model over the less expensive but very similar Yardmaster 2. Because the the height of the screen is adjustable with Plus model, you can set the screen low to the ground for up close viewing such as a small living room if I bring it to a friend's place for example, or higher up if viewed at further distance. The other difference is the screen, which has a brighter gain at 1.3 vs 1.1. This is helpful if using screen with some ambient light. It was money well spent. 5

Robert	03/09/2024
[1.0] It's a dream come true using this with the ARRI Orbiter lights... 5

Riccardo	05/08/2024
[2.35:1] After purchasing my Epson projector, I saw the whiteboard for $600.00. I was concern regarding the price. Once it arrived it (made in the USA) �built like a brick I can not stress the quality�of this product first class as both a whiteboard�but also as a projection screen. 5

Neil	21/07/2024
[Yes] Had a cheaper screen before and this one definitely brings out the quality of the Epson projector. Assembly was straightforward and without a hitch. Works well even with a fairly light room, and very crisp with movies I the dark. Looks nice when not on. Arrived much faster than promised direct from the manufacturer. 5

John	15/07/2024
[2.35:1] I had a Stewart filmscreen in my old house media room and LOVED it. Had it for 11 years when it was cutting edge to have an HD projector and 110 screen. When we moved I was looking forward to getting another great screen but was worried about the price. The first one cost a bundle. Then I found these CIMA screens. Stewart quality and amazing appearance for an incredibly competitive price. HIGHLY recommend. 5

Steven	28/04/2024
[2.35:1] Arrived damaged (the two legs each had 1 locking clip that didn't lock), but B&H customer service was great and got the manufacturer to send replacement legs out. The screen itself is super easy to setup and the quality of the screen is great! I was actually slightly surprised how easy it was to setup and the size of the screen is slightly larger than I thought it would be. Movie nights have been amazing so far! 5

Kevin	23/04/2024
[Yes] Using this with a Sony VPL 365ES. Nice combo. My only thought is I wish it has a masking option..... 5

anyonymous	04/04/2024
[2.35:1] The set up of the frame was very easy. The screen was a good material. love that it came with a case. nice and lightweight. Easy and light enough for two people to set up and tear down with ease. The only negative was the screen had big indention markings in in from shipping. there were very visible for the first few days. after that all was good. 5