Grow your business by expanding your network capacity with the Netgear M4350-32F8V 32-Port 10G SFP+ Managed AV Network Switch. Designed primarily for high-bandwidth AV and IT applications, this network switch includes 32 SFP+ ports that support up to 10 Gb/s fiber connections.

With Netgear's IGMP Plus, the M4350-32F8V switch delivers smooth video-over-IP multicasts with little to no setup required. Eight 25G SFP28 ports are available for uplinks and stacking. Installing a separately purchased second power supply provides 1+1 redundancy. This switch works with Netgear's Engage Controller management platform, in addition to standard command line and web-based interfaces.

32 x 10G SFP+ Ports    8 x 25G SFP28 Ports    1.04 Tb/s Switching Capacity    773.76 Mpps Forwarding Rate    Rackmount Design    Intelligent Fan Cooling    Secondary PSU Support    Optimized for AV-Over-IP Multicasts    Netgear Engage Controller Support

With a 1.04 Tb/s switching capacity and 773.76 Mpps forwarding rate, this switch is designed to provide smooth and reliable AV broadcasts.

Netgear IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.

The intelligent fans may be configured in Quiet Mode help to minimize noise or Cool Mode for maximum cooling. Mounting ears are included for rack mounting.

Auto-trunk and auto-LAG functionality auto connects with other M4350 and M4250 switches, supporting nonstop forwarding stacking, spine and leaf topology, and core to edge connectivity.

A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.

Related Questions and Answers

Q: 1. Can I use 3 of these on camera end with a 2110ip 3X3G on mixer's end using a switch like the one you offer or any 10g switch?

A: Yes, multiple Blackmagic Design 2110 IP Mini BiDirect 12G Converters can be connected to a mixer via network switch, your video mixer would just have to support 2110 IP video input to ingest the signals.

Q: 2. can i wired connect 3 nighthawk ax routes to have same but stronger wifi signal on each floor of my house. like i can co with airport raccesspoint. ?

A: Yes, the devices can be configured as standalone bridges, they are fully featured AX6000 devices.

Q: 3. Would this product work with NETGEAR's SMPTE 2110 Compatible M4350 Switches? I'm trying to convert a 1080 60p camera SDI signal

A: If the NETGEAR switches are compatible with SMPTE 2110, then the Blackmagic Design 2110 IP Mini BiDirect 12G Converter would work well, as it converts SDI to standard SMPTE-2110 IP signal. 10G Ethernet connections would be needed to connect to the device.

Q: 4. What’s the latency?

A: Generally, the expected latency of the Blackmagic Design 2110 IP Mini BiDirect 12G Converter would be about 2 frames, but if the signals are gen-locked, the latency would then decrease to just a few lines of resolution.

Q: 5. Does the Asus ws x299 sage have support for Thunderbolt 3?

A: Yes, but you have to put the T3 pcie card in the 2nd slot and thus cannot have a dual gpu card. Wish I had known this first.

Q: 6. If I have 3 of these set up at 3 studio cameras, I would need 3 at the mixer. How would I use Talkback for the 3 operators?

A: If you connect all three Blackmagic Design 2110 IP Mini BiDirect 12G Converters to a computer via USB-C, you can use the Blackmagic Converters Setup software to rout your talkback to each operator individually or all three at once.

Q: 7. is it compatible with Windows 10?

A: Yes, one of my devices, an HP laptop, runs on windows 10, and connects to this router with no problems

Q: 8. Why the coax cable?

A: The COAX cable is required for the Internet service providers to allow the modem to connect to there service systems for an internet connection.

Q: 9. I understand it's 2.5Gb/s but is that upload as well?

A: You're actual upload speeds will depend on your internet service, but a 2.5 Gb/s modem can handle 2.5 Gb/s of throughput up or down.

Q: 10. Can this product convert or decode srt, tcp, rtsp transmissions from other systems? Like the teradek bond backpack or a live u?

A: The Blackmagic Design 2110 IP Mini BiDirect 12G Converter is not able to convert or decode SRT, TCP, or RTSP transmissions. It is designed to be used in studio environments with SMPTE-2110 IP systems.