Ideally suited for UHD 4K entertainment and teleconferencing, the Da-Lite DL15814V Cinema Contour 71x168" Fixed Frame Screenfrom Da-Lite DL15814V Cinema Contour 71x168" Fixed Frame Screenoffers a 21:9 ultrawide aspect ratio. This provides a 71 x 168" screen size, suitable for films and for fitting more participants on-screen during remote calls. The screen is bordered by a black frame that draws the eye in and enhances contrast. The screen surface itself is an HD Progressive 1.1 Perf and is recommended for front projection from laser projectors. The neutral white surface is perforated to be acoustically transparent for speakers placed behind it to improve realism.

182" / Ultrawide 21:9 Aspect Ratio    HD Progressive 1.1 Perf Surface    1.1 Gain    Black Frame Border Enhances Contrast    45° Angle-Cut Frame    Perfectly Flat Neutral White Surface    Black Backing Retains Brightness    GREENGUARD & GREENGUARD Gold Certified

• 182" diagonal screen size
• 45° angle cut frame
• Mounts on the back of an aluminum frame with masking or cropping border
• Pro-Trim finish to absorb light surrounding the viewing area
• Black backing to retain projected brightness
• GREENGUARD and GREENGUARD Gold certified
• Easily cleaned with mild soap and water

Related Questions and Answers

Q: 1. will this fit on the new BMPCC 6K Pro?

A: no it will Not

Q: 2. Is it for the K1?

A: This is a DA lens...meaning designed for APS-C Sensors. It will work on the K-1 because the K-1 will just use the part of its sensor that is APS-C size. Pentax Full Frame lenses are labeled FA .

Q: 3. How do I put film in?

A: When looking at the back of the camera there should be a button on the left side that you can slide. If it doesn't open, make sure the knob on the top left is released. (If not, pull it up. It is the knob for the film rewind.) Then you should be able to load your film just like any other film camera. Be sure to push the top rewind knob back down before you try to take pictures. I hope this helps! Have fun with it, I know I am!

Q: 4. What range of wavelengths of light LESS THAN 400 nm does this lens transmit at least 50% of? At least 25% of?

A: Unfortunately, the manufacturer does not rate the lens for IR absorptance. However, as there is no IR coating, such near IR in particular should be expected to pass with little attenuation.

Q: 5. Does this particular version of the Yungnuo 50mm pass (i.e. transmit,) UltraViolet light through it?

A: Yongnuo YN 50mm f/1.8S DA DSM Lens for Sony E passes white light.

Q: 6. Is this lens compatible with the Pentax K-x?

A: Yes. Mechanically the same as smc . HD refers to a new lens coating. There should be no problem for the K-x.

Q: 7. Will this frame work with Westcott 6x6 fabric? How would they attach?

A: No, the Chimera Frame for Frame/Panel Reflectors - 72x72" is not compatible with the Westcott 6x6 fabric. Westcott uses a Velcro system which the Westcott Fabric frame provides. It would be advisable to use the Westcott Scrim Jim Cine Frame Set (6 x 6'). This frame would work perfectly as it was intended. BH # WE1833

Q: 8. Will it cause vignetting on the Pentax K-1?

A: On a full frame K-1, this APS-C lens will vignette.

Q: 9. Which projection does it use?

A: We think you are asking is there any protection filter available for this lens. As it often happen, a lens manufacturer creates a fisheye lens and then several months later a 3rd party maker comes up with a solution. That usually involves a large holder for the filter and an adapter for the lens. Unfortunately, there is no solution like that at this time.

Q: 10. Is this lens brand new?

A: Yes, this is a brand-new lens.