You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Boom Library Sci-fi Momentum Designed | 48 Chars

Boom Library Sci-fi Momentum Designed | 48 Chars
  • Product Code: eq170202
  • Availability: In Stock

$405.00 $546.75

With continuous and discrete sounds, the DESIGNED Boom Library Sci-Fi Momentum Designed | 48 Charsfrom Boom Library Sci-Fi Momentum Designed | 48 Charscan add the effects that flesh out your audio production with futuristc sounds. With the exception of continuous sounds, each sound has 6 variations, ensuring that your engines, blasts, and lifts never sound the same twice in a row. Created with the idea that you wonâ¿¿t have to do any further sound design yourself. These sounds are already forged to perfection, allowing you to simply drag and drop what you need and not have to worry about any additional sound design. This collection provides a quick and easy workflow. You can still use those sounds as a basic and layer, and stretch or otherwise adjust them to suit your specific need

6 x Variations of Discrete Sounds    For Film or Game Action Sequence    96 kHz, 24-Bit WAV Files    Windows and macOS Compatible

Parameters
Delivery FormatDownload
License TypeStandard: Perpetual License
User Support1 User
System Compatibility/RequirementsOperating System: Windows/macOS  

Related Questions and Answers

Q: 1. 18.5 x 13 x 5.5" are the dimensions of this insert. If I put pressure onto the top, would the 5.5 inches reduce to 5 inches? I would be inserting this into a check-in luggage which has a 5 inch wall height.

A: I do feel you would be fine with compressing about half an inch yes. Though I am not sure I would check luggage with camera gear unless it was intended for airline travel for camera gear like the SKB and Pelican cases are.

Q: 2. Will this also fit the Pelican 1450 / Apache 3800?

A: The SKB iSeries 1510-4 Think Tank Designed Divider Set wil fit in the Pelican 1450, will not fit in the Apache 3800

Q: 3. Is there a version of this product that fits the Pelican 1560?

A: Hi Jessica, There will be an equivalent divider set for our 3i-2015-10 coming out soon. It was specifically designed for our cases and wheel cutouts so I'm not sure that it would work for a Pelican 1560 case. Thank you,Will

Q: 4. will this fit in the pelican 1535 Air case?

A: Measure the insert and then the interior of your case. That is the answer to your question.

Q: 5. Regarding the 48" Boom Arm. Is each section or arm 48" long or is that the total length?

A: The total length of the MBA48 boom arm is 48".

Q: 6. I see the dimensions, but what is the height dimension? Thanks

A: The height dimension of the SKB iSeries 1510-9 Think Tank Designed Divider Set is 6".

Q: 7. Dimensions 20.4 x 11.4 x 5 .... Can this insert with 20.4 inches be squeezed to fit into a box of 19.25 inches?

A: The SKB iSeries 2011-7/2011-8 Think Tank Designed Divider Set may be pushed in when attempting to fit into a box that is only 19.25 inches long.

Q: 8. Will this fit the Airport International V2.0?

A: Yes SKB iSeries 1610-10 Think Tank Designed Divider Set will fit but it is much smaller, you would need to use double stick velcro purchased separately to keep it from moving around.

Q: 9. Will this fit the Pelican 1450 case?

A: The SKB iSeries 1510-6 Think Tank Designed Divider Set outer dimensions are 15.0 x 10.5 x 4.5 / 38.1 x 26.7 x 11.4 cm. The Pelican 1450 Case interior dimensions are 14.6 x 10.2 x 6.0 / 37.1 x 25.9 x 15.2 cm. So the Divider set is too long and too short. You might be able to fudge it in but we cannot recommend this combination and would suggest instead getting the proper case the SKB iSeries 1510-6 Waterproof Utility Case (Black) B&H # SK3I15106BE (Note:Special Order) Even better get the SKB iSeries 1510-6 Case with Think Tank-Designed Photo Dividers & Lid Foam (Black) B&H # SK3I15106DT or the SKB iSeries 1510-6 Case with Think Tank-Designed Photo Dividers & Lid Organizer (Black) B&H # SK3I15106DL.

Q: 10. Will this fit a Pelican 1510 cherry one case?

A: I have a pelican 1510 case and this divider. The fit isn't perfect but it works. On the pelican case where the wheels raise into the interior of the case the divider does not fit well. It causes the divider to lift and buckle slightly but does not interfere with lid or seal. My gear is still well protected and feel this was a good purchase.

14/09/2024

[Download] I ordered this Boom Arm through B&H as a last-minute decision on 05 APR 2020 because many of the Boom Arms available on Amazon at the time had extended delivery timeframes as a result of the COVID-19 pandemic. I use it to suspend by Blue Snowball iCE USB microphone and pop filter above my desk as pictured.

This boom arm built very strong. Its joints are stiff, so it's not a good choice for repeatedly folding and extending. If you want a boom arm that you'll repeatedly take down and set up, look elsewhere. For a stationary (fixed location) setup, it's awesome. It holds my mic and pop filter nice and steady.

5
05/08/2024

[Download] What I had before was a cheap boom arm, only about 24. It was pretty terrible. It didn't have the strength to hold up my Samson mic and it was nearly impossible to get it out of the way when I don't need it.


This boom arm is perfect...or as near as I could expect. The 48 are enough that I can position the mic ABOVE my arm-mounted 27 monitors and it will even hold my mic out of my line of sight. It IS a little stiff, but that's okay if it means it can stay in position, even if it gets bumped. It looks pretty sharp as well, unlike the cheap boom arm I had.

5
29/07/2024

[1 User] Some complained that adjusting it is difficult. I have no issue. It is better to be a little tight than a little loose. I adjusted it to where I wanted it and just swing it out of the way when not being used. Perfect. Happier than I expected to be.

5
28/07/2024

[1 User] I have a wide desk, so needed something that was long enough for my needs. This height and length on this arm is perfect for my situation. This boom fit my Baby Bottle Blue Microphone just fine. The tension on the arm is great - not too slack, not too tight. Very satisfied with what I got for the price.

One suggestion I have - I know the G-clamp style mounting is pretty common for these booms, but I wish there was some better non-permanent clamp. No matter how hard you tighten them down, they can still flex a bit when you pull the arm. The package does come with a mount you can screw the boom down, but I didn't want to drill any screws.

5
07/07/2024

[1 User] I needed a longer boom arm for one of my microphones. This isn't quite as smooth as my regular boom which was designed for heavy equipment, but it does exactly what I need it to do - works well and has a much longer reach than most boom arms. In my use case, I only use it for lighter equipment.

5
22/06/2024

[Download] Had it for almost 2 weeks. I like it.

5
09/06/2024

[Download] This is the fourth mic boom arm I've tried, and this one does what I need, finally. I have a shelf over my desk, and want the mic to come out over my head just above the frame when I'm recording presentations. This arm is extremely long, giving me great possibilities whether I'm sitting in front of my computer or standing up to present in front of a green screen. The arm will come out completely horizontal if I want. Not only that, but while many boom arms pad only the top side of the clamp, this one has padding on both sides so you won't damage the top of the bottom of the surface you are clamping to.


The one thing to be aware of is that the minimum angle is a little more than 90 degrees. So while the boom arm will extend out very far, there's a minimum distance you will be to the place where you clamped the arm. So keep in mind that if you don't want 48 of extension, you may want to order a smaller model like the MBA38 so as to have more flexibility to get closer to where you clamped the mic.

5
06/06/2024

[Download] This is a really nice arm, and I would expect that given the price. The movement is smooth, its easy to attach a cable to, and has survived my kids moving it all over the place. It comes with two different mounts (clamp and screw-on) so there is some versatility in what you can do.

5
21/05/2024

[1 User] Bought for my podcast co host and he loves it. Keeps everything tidy and makes everything more ergonomic.

5
25/04/2024

[1 User] Did a lot of research on quality boom arms with a LONG (48) reach. Decided on the Samson MBA48. B&H had the BEST price anywhere so ordered. The arm has exceeded my expectations in every way. Super happy with the purchase and the service I received from B&H. An easy 5 stars!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Waterbird Ethernet Sdk License - 48 Chars

$1,440.00 $1,987.20

Micro-boom Toolbox Library | Boom Library

$195.00 $234.00

Custom Designed Cardboard Box

$40,872.00 $64,986.48

Executive Designed Adjustable Desks

$660.00 $943.80

Boom Library Humanoid Creatures Bundle

$735.00 $1,080.45

Products You May Like

Altman Spectra Star 100w Dimmable Led Luminaire

$4,306.65 $6,847.57

Swarovski 12x50 El50 Binoculars Fieldpro Green

$8,007.00 $12,811.20

Ik Multimedia T-racks 5 Plug-ins Bundle

$1,349.97 $1,727.96

Orwo Nc500 16mm Color Film 100ft

$164.97 $262.30

Next Level Racing Ers2 Seat For Elite Sims

$899.97 $1,115.96

Premier Imaging Dual Edge Ripper 24"

$119.85 $188.16

Lensbaby Velvet 56mm F/1.6 Pentax K Silver

$1,649.85 $2,128.31

Onyx 120 Bi-color Led Camera Light

$239.97 $307.16

Panasonic Pt-req15lbu 15,000-lumen 4k Laser Projector

$155,997.00 $223,075.71