Craft captivating displays on walls, floors, and ceilings with the American DJ UBL6H, a 22.5" versatile LED linear fixture with six 20W, 6-in-1 HEX LEDs (RGBAL+UV) well suited for uplighting, downlighting, stage washing, and dancefloor illumination. The inclusion of the lime LED chip allows for a high CRI of >90, which ensures the fixture’s output will render colors accurately when used to illuminate scenery, décor, and people.

The LEDs are arranged into three independently controllable groups of two, allowing for smooth color mixing, while creating a wide variety of hues and shades. Additionally, the fixtures can also be used to generate white light output with color temperature variable between 2300 and 9900K. For even more versatility, the UV element allows the creation of a "blacklight" effect, causing white and neon colored décor and clothing to glow when used alone. The UBL12H comes complete with an indoor locking power cord, UC-IR24 remote, and a 20° diffusion filter.

For Uplighting, Downlighting, Wash, FX    6 x 20W RGBAL+UV 6-in-1 LEDs    0 to 100% Dimming; 6 Modes, 4 Curves    17° Beam Angle/20° with Diffusion Filter    7 DMX Channel Modes    Smooth RGBAW+UV Color Mixing    64 Built-In Color Macros    5 Operational Modes    Includes Diffusion Filter & Power Cord    Includes Brackets and UC-IR24 Remote

• Ultrabright, 22.5" indoor linear bar with 6 x 20W ultrabright HEX (RGBAL + UV 6-in-1) LEDs
• Long-life LEDs (rated at approximately 50,000 hours)
• Linear color temperature control (2300 to 9900K)
• Smooth RGBAL+UV color mixing
• OLED display with 4-buttons
• 7 DMX channel modes: 6, 11, 13, 16, 18, 25, and 28 channels
• RDM Compatible
• 3 groups of two, RGBAL+UV LED pixels controllable via DMX in 18, 25, and 28 channel modes
• 5 operational modes: Auto Run, Program Mode, Sound Trigger, RGBAL+UV Manual, and DMX-512 Mode
• LED refresh rate: 1.9 kHz
• 64 built-in color macros
• 6 selectable Dim modes (Standard, Stage, TV, Architectural, Theatre, and Stage 2)
• 4 selectable Dim curves (Square, Linear, Inv. Square, and S. Curve)
• Built-in microphone for sound trigger
• Pulse and strobe effect
• Electronic dimming: 0-100
• Built-in horizontal magnetic alignment feature
• Compatible with the ADJ UC-IR24 remote. Operates at a distance of up to 32.8'

Related Questions and Answers

Q: 1. How does this connect to the wall?

A: This unit can be connected to the wall on a standard, single gang box or with wall anchors.

Q: 2. How do you power this? It says the power supply is sold separately. Is it just a regular wall plug or do I need to get something else?

A: You will need a 24v Remote Transformer. We are in Australia and use 240v as standard. You should speak to an electrician regarding wiring.

Q: 3. can it be ceiling mounted like an exit sign?

A: Yes it can be mounted like an exit sign, but not to the actual ceiling. It mounts on the wall close to where the ceiling meets with the wall.

Q: 4. Will the Sandies 65-812 work with this fixture to make it blink when switched on?

A: No. This is a simple On or Off fixture.No blinking. Power cord is not included. A flasher adaptor (similar to what one would use to flash Christmas lights) may be bought at a local hardware store.

Q: 5. is a power supply included?

A: A power supply is not included with this product. According to the manufacturer, the reason is that usually these lights are installed over studio doors and are controlled by a relay that is activated when a mic is turned on in a Recording or Broadcast studio.

Q: 6. How do I know which power model I need? I guess I'll be wiring it into a power box.

A: You may be able to wire this directly into your device as this sign is a signal and is not always on. Please contact an electrician for installation or contact Sandies directly at: Sandies; Tel: (215) 547-2570 Email: service@sandiesusa.com

Q: 7. The description says power cord not included. What type of power cord is needed?

A: You have to wire it to the main switch you use to turn your gear on. This way when you turn on whatever master switch you are using to turn everything on the sign lights up. When you finish working and shut down the light will go out. Normally in studios they used to be wired to the tape machine transport so once you pressed play the sign would go on.

Q: 8. how do you install this device?

A: It is hard wired just like a wall switch or table lamp would be.

Q: 9. Can this just be lugged into wall socket to turn on?

A: Yes - it will plug into an AC outlet.

Q: 10. How does this mount to a microphone stand ? Pics would be nice. Thanks.

A: The Grace Design SB-BLRA comes with a 5/8 -27 thread stand mount adapter for use with a mic stand.