Power up your set up with the 5' Whirlwind AC Powercon NAC3 Jumper Cable 5ftfrom Whirlwind. This jumper cable is designed to link your PL1-420 boxes together or with PL1DI Distro Interface Boxes.

For Linking PL1-420 and PL1DI Boxes    5' Length

Related Questions and Answers

Q: 1. Will this also work the GH6

A: Panasonic USB-C AC Power Adapter and Cable for DC-GH7 is not compatible with the GH6.

Q: 2. do you have to have a mixer to use this?

A: No. I use it to go from stereo 1/8 sources (like laptops and cell phones) to one or two XLR's that I then put into a mixer, personally. But you could plug your XLR's into a combo amp or whatever else you want.

Q: 3. Do you have interior dimensions please?

A: According to the manufacturer, the internal dimensions are as follows: 8"H x 10"W x 5.5"D.

Q: 4. Will this adaptor work with the HLD-8 grip for the E-M5?

A: This is dedicated for use with dedicated to the Olympus HLD-9.

Q: 5. Can I use this device as a splitter to make a backup recording on a Zoom H6 for example?I mean, I have a shotgun mic. I split the signal in two, put it in two inputs of the recorder... I don't want to use a Y because I could lose a lot of gain on the two outputs. Or do you have other devices that can do this? Or a good mixer (I mean affordable 300-500) to to team with the H6 that can do this? I plan to use it with a Shotgun AND a Lavalier. So 2x2 outputs. Thanks! ;)

A: This device is designed for line level signals only. Splitting a microphone signal is never a good practice as there will be signal loss and added noise. A mixer, not a splitter is the way to go. The Mackie Mix8 (B&H # MAMIX8) is an 8-channel compact mixer that features high quality components, a rugged metal chassis, and is designed for a variety of sound reinforcement applications. The mixer features two mic/line inputs with 48V phantom power, two stereo 1/4 line inputs, and stereo 1/4 aux send and return. It is capable of accommodating dynamic and condenser microphones, keyboards, DJ setups, portable music players, and more.Each of the two mic/line inputs is equipped with XLR and 1/4 connectors, a dedicated 3-band EQ, aux send, pan, level control and an LED overload indicator. The two stereo 1/4 line inputs each feature an aux send, 3-band EQ, level control, balance control and also have an LED overload indicator. a href= http://bhpho.to/1sLQeDj target= _blank http://bhpho.to/1sLQeDj/a

Q: 6. What is the difference between this box and the THS3? They look the same except the knobs are labeled different.

A: The difference between the Whirlwind THS 3 Talkback Headphone Box and Sports Announcer Console with Left/Right Headphone Volume Controls and the Whirlwind THS 4 Talkback Headphone Box and Sports Announcer Console with Individual Input Volume Controls is the way the signal is routed and how the rotary controls affect the signal. On the THS 3, the left volume control is used to adjust the volume of the left earpiece and the right volume control is used to adjust the volume of the right earpiece. The controls on the THS 4 are used to adjust the input volume levels for input 1 and input 2 before the signal feeds to the input assignment switches. The controls on the THS 3 affect the volume level after the signal passes through the input assignment switches. The input assignment switches for both the THS 3 and THS 4 allow you to configure the routing for the two channels and select whether the audio signal is sent to the left earpiece, right earpiece, or to both earpieces.

Q: 7. How do you plug this into a Behringer audio board? Could this work as a sideline reporter kit?

A: Should work and connect via the provided I/O:Mono In: 1 x 3-pin XLR femaleStereo In (L/R): 2 x 3-pin XLR female, balancedMic In: 1 x 3-pin XLR female Phone: 1 x 3.5 mm jack; 1 x 1/4 jackMic Out: 1 x 3-pin XLR male

Q: 8. Does this also power an Ace 500 TX or RX module?

A: The NIBL 056 AC adapter is intended to power the receiver, since in most situations battery power would be used for the transmitter. However, both the Transmitter and Receiver have the same power input and either would be able to use the power adapter. A second power adapter would be ideal if you want to power both the transmitter and receiver from AC power.

Q: 9. Does this unit require external power? if so, how much and on what kind of connector?

A: The Whirlwind Line Balancer/Splitter requires no external power and is designed to split a single line level input signal into two balanced line level outputs. A choice of two output configurations is provided: one direct output and one isolated output, or two isolated outputs. The Line Balancer/ Splitter uses Whirlwinds TRSP-600L transformer and has a frequency response of 20 to 20kHz, 1dB @ +2OdBm.On the Line Balancer/Splitter are two male XLR jacks, one female XLR jack, a 14 jack and three switches as outlined below:INPUTEither of the two input connectors, a female XLR jack or a 14 TRS jack (Tip = Pin 2 and Ring = Pin 3) can be used for connection from a line level source, balanced or unbalanced. Use only one input at a time.OUTPUTSThe male XLR output connectors can be configured in one of two ways. The ISOLATED OUT/SPLIT 1 is always transformer isolated and the DIRECT OUT/SPLIT 2 is either directly connected to the input or transformer isolated, depending on the position of the OUTPUT SELECT switch.OUTPUT SELECTThis push-button switch selects the output mode of the unit. In the out position, the DIRECT OUT/SPLIT 2 provides a direct output signal and the ISOLATED OUT/SPLIT 1 provides a balanced 600 isolated signal. In the in position (the center of the switch changes to orange) both output connectors provide a balanced 150 ?isolated signal that is attenuated by 6dB from the input.GND/LIFTSEach of these switches disconnects the ground between the inputs and the XLR outputs when set to the LIFT position. Grounds remain connected when set to the GND position.This product is warranted to be free of defects in materials or workmanship to the original purchaser for a period of 3 years from the date of purchase.

Q: 10. So with this one box i can have two announcers or is it one announcer per box?

A: The THS boxes are designed for use by one announcer.