Power up your set up with the 50' Whirlwind AC Powercon NAC3 Jumper Cable 50ftfrom Whirlwind. This jumper cable is designed to link your PL1-420 boxes together or with PL1DI Distro Interface Boxes.

For Linking PL1-420 and PL1DI Boxes    50' Length

Related Questions and Answers

Q: 1. What PoE injector is required for this device? It's unclear from the specs what it expects.

A: This unit requires an 8.5w PoE budget.

Q: 2. Will this plug work to my couch?

A: The edelkrone AC/DC Adapter for Pan PRO is designed for Edelkrone products. If your couch happens to accept a 2.1mm x 5.5mm barrel connection with 9 volts and 2.2 amps, then it is something to consider.

Q: 3. So with this one box i can have two announcers or is it one announcer per box?

A: The THS boxes are designed for use by one announcer.

Q: 4. Can you use Sennheiser Headphone with boom mic's (Headset) with this machine? is it for one microphone set up only (i.e only one commentator)do you have Australian power plugs for these

A: Yes the THS4 with work with Sennheiser Headsets. It has one mic/headset input.We do not supply Australian power plugs, one can either use an adapter or find their own wall supply that has a 12 V AC 1 Amp output. See our website at a href= http://www.whirlwindusa.com target= _blank www.whirlwindusa.com/a to learn more and download the product manual.

Q: 5. Will this work with AD600 PRO ii?

A: The Godox AC Adapter for AD600 would not be the accessory designed for use with the Godox AD600Pro II All-in-One Outdoor Flash. Instead, the Godox AC Adapter for AD600Pro Witstro Outdoor Flash, B&H # GOAC26, would be the recommended option designed for use with the Godox AD600Pro II All-in-One Outdoor Flash (https://bhpho.to/2ItFN1d).

Q: 6. Will this adaptor work with the HLD-8 grip for the E-M5?

A: This is dedicated for use with dedicated to the Olympus HLD-9.

Q: 7. Does this unit require external power? if so, how much and on what kind of connector?

A: The Whirlwind Line Balancer/Splitter requires no external power and is designed to split a single line level input signal into two balanced line level outputs. A choice of two output configurations is provided: one direct output and one isolated output, or two isolated outputs. The Line Balancer/ Splitter uses Whirlwinds TRSP-600L transformer and has a frequency response of 20 to 20kHz, 1dB @ +2OdBm.On the Line Balancer/Splitter are two male XLR jacks, one female XLR jack, a 14 jack and three switches as outlined below:INPUTEither of the two input connectors, a female XLR jack or a 14 TRS jack (Tip = Pin 2 and Ring = Pin 3) can be used for connection from a line level source, balanced or unbalanced. Use only one input at a time.OUTPUTSThe male XLR output connectors can be configured in one of two ways. The ISOLATED OUT/SPLIT 1 is always transformer isolated and the DIRECT OUT/SPLIT 2 is either directly connected to the input or transformer isolated, depending on the position of the OUTPUT SELECT switch.OUTPUT SELECTThis push-button switch selects the output mode of the unit. In the out position, the DIRECT OUT/SPLIT 2 provides a direct output signal and the ISOLATED OUT/SPLIT 1 provides a balanced 600 isolated signal. In the in position (the center of the switch changes to orange) both output connectors provide a balanced 150 ?isolated signal that is attenuated by 6dB from the input.GND/LIFTSEach of these switches disconnects the ground between the inputs and the XLR outputs when set to the LIFT position. Grounds remain connected when set to the GND position.This product is warranted to be free of defects in materials or workmanship to the original purchaser for a period of 3 years from the date of purchase.

Q: 8. How would you mount this to the roofline of a detached garage? Facia or soffit mount? How? What bracket?

A: In order to mount the Ubiquiti Networks NanoStation AC loco 5 GHz airMAX ac Radio BH #UBLOCO5AC, to the roofline of a detached garage, you can use a mount like the Ubiquiti Networks Quick-Mount for Ubiquiti CPE Devices, B&H # UBQUICKMOUNT.

Q: 9. Does this also power an Ace 500 TX or RX module?

A: The NIBL 056 AC adapter is intended to power the receiver, since in most situations battery power would be used for the transmitter. However, both the Transmitter and Receiver have the same power input and either would be able to use the power adapter. A second power adapter would be ideal if you want to power both the transmitter and receiver from AC power.

Q: 10. What are the actual specs of the cables?

A: The unit offers the following cables in the kit 4 x Ultra-Slim BNC Cables (24, 12, 6") 3 x HDMI Coiled Cables 2 x LANC Coiled Cables 1 x D-Tap to 4-Pin XLR Coiled Cable 1 x D-Tap Coiled Cable 1 x D-Tap Splitter Cable 0.1" BNC Cable Thickness Right-Angle BNC Connectors HDMI to HDMI Type A, Mini, Micro Ends