Save space without sacrificing performance with the snow Thermaltake Tower 200 Mini Chassis Snow | Compact PC Casefrom Thermaltake. The compact case supports Mini-ITX motherboards and is built with SPCC steel and a tempered glass panel to ensure a study construction while delivering a clear view of your components. With bays for two 3.5" or four 2.5" drives, and three expansion slots for GPUs up to 14.9", network cards, or other PCIe cards, the Tower 200 can fit a surprising about of power.

Despite its smaller size and ability to house high-performance components, this mini tower provides excellent airflow with its ventilated panels, support for radiators up to 360mm, and two included 140mm fans located on the top and rear of the case. The top panel provides easy access to two USB-A 3.0 ports, one USB-C 3.2 Gen 2 port, and HD audio ports. Thanks to the built-in GPU stabilizer that prevents your graphics card from wobbling during transit, you can safely bring your system with you to events or just move it around the house.

Mini-ITX Motherboard Support    SPCC Steel and Tempered Glass Panel    2 x 3.5" Drive Bays    4 x 2.5" Drive Bays    3 x Expansion Slots    1 x USB-C, 2 x USB-A    2 x 140mm Fans Included    Supports Radiators up to 360mm    Supports GPUs up to 14.9" Long    GPU Stabilizer

The vertical tower design provides a small footprint while maintaining plenty of space to work in.

Dust filters on the rear, side, and bottom of the case keep your build clean and are easily removed for maintenance.

Monitor real-time information such as CPU load, date and time, or weather, or add a GIF for some personal flair, with an optional 3.9" LCD display that installs in the case's front panel.

Related Questions and Answers

Q: 1. What does the mm difference mean between these 2 sync cords? Impact Sync Cord Male Mini (3.5mm) to Male PC (16') and Impact Sync Cord - 1/4" Phono Male to PC Male - 16' (4.8 mm)

A: The “Mini 3.5mm” plug is a “Mini-Phono” plug, which is approx. 1/8”, compared to the full-size 1/4” Phono plug.

Q: 2. Will it work with my minolta srt101 and with the flash minolta auto132X?

A: The Impact Sync Cord - Male PC to Sub Mini - 18" (45 cm) B&H # IMPCMSMM18 would fit the Minolta Auto 132X flash so you can trigger it from the SRT-101. https://bhpho.to/2ZG4yjc

Q: 3. Will this work with mamiya m645 - sekor 80mm 2.8 c lens? I want to sync it with a godox sk400ii by a godox xt16.

A: To use a Xt-16 you would want the cable at this link. https://bhpho.to/33z4wg2

Q: 4. Can I attach this wire to an IMPACT mono light strobe and then to a Sekonic 305B or 305S without damage to either?

A: Sorry- I my question is- can this wire be attached to a Sekonic 308S or 308B without causing any damage to either the light meter or the IMPACT strobe flash?

Q: 5. Will this cord work to connect a Canon 7d Mark 2 to a Neewer Flash speedlight?

A: If the speedlight has a pc sync socket, then yes.

Q: 6. Would this cord connect my canon 7d to my 580ex11 with full metering capabilities. I have a waterhousing for my 7d and a separate one for my flash and the off camera shoe cord does not fit inside my cameras body housing as there is not enough room on the top. So basically I need a cord that will connect the two that is small (possibly connects to side of camera body) and still retains all the metering controls ect. Does such a cord exist?

A: Unfortunately, no, there is not a cable that exists for your stated needs. PC cables do not offer any metering capabilities; they are strictly designed to syncronize the flash with your shutter. When using a PC cable (on any brand camera), you have to set the flash output power manually. If you need a cable that will transfer metering information, you would need a hot shoe TTL off-shoe cable for your needs, such as the Canon OC-E3 Off-Shoe Cable or the Vello TTL-Off-Camera Flash Cord for Canon EOS which we have listed on our website. However, you state you already own a TTL cable, but it does not fit in your housing for your needs. As you are using underwater gear, the manfuacturer may manufacture an option for your needs, but as you have not listed the housing that you own, I would recommend contacting our Underwater Department at uw@bhphotovideo.com and give them the brand/model of your housings to inquire if there is an option that would work for your desired needs.

Q: 7. With the PC Sync end plugged into my camera (Canon R5 / 5D), would the other end plug into the Canon ST-E3-RT Transmitter (not attached to the hot shoe) to trigger the flash?

A: Yes, but will offer no TTL metering.

Q: 8. Will this work with Olympus camera M1 Mk11 ? J. Payne

A: The Olympus EM1 Mark II does have a PC Sync socket, so this cable would be compatible.

Q: 9. Can I use this cord to connect a Hasselblad 503CX with an 80mm 2.8 CF Zeiss lens to a Godox AD600 Pro?

A: Yes this cable will connect from the CF 80mm f/2.8 Lens to your Godox AD600 Pro.

Q: 10. Can I use this wire with a Westcott 240 lighting kit?

A: Yes the Westcott Strobelite 2 Light Educational Kit B&H # WESL2LUEK MFR # 240 can work with this sync cord.