Take control of your patch with the intellijel Tangrams, a Eurorack module with a pair of snappy, classically analog envelopes with visually intuitive controls, a powerful CV controllable cyclical gate generator, integrated VCAs, and trigger buttons.

The dual ADSR is inspired by the Roland SH-101, while the pulser circuit takes its inspiration from trapezoidal function generators like the one on the EMS Synthi. The module goes beyond the standard ADSR controls and provides several enhancements, including delayed one-shots, cycling organic envelopes, and more. The two VCAs add level control of each envelope or alternatively direct injection of the signal you'd like to envelope, freeing up your other VCAs. The module ships with a ribbon power cable.

Dual Analog Core Envelopes    Inspired by Roland SH-101 / System 100m    Voltage-Controlled Pulser Circuit    Inspired by EMS Synthi    Delayed One-Shots, Cycling Organic Env    Two VCAs for Level Control of Envelope    VCA works with Audio Signals    Includes Ribbon Power Cable

• Tangrams is a dual analog core-envelope inspired by the Roland SH-101 / System 100m design with several enhancements.
• Taking further inspiration from trapezoidal function generators like the one on the EMS Synthi, intellijel has added a voltage-controlled pulser circuit to link the triggering of two envelopes, allowing for delayed one-shots, cycling organic envelopes, and more.
• In addition, intellijel added two VCAs for level control of each envelope, or alternatively, direct injection of the signal you’d like to envelope, freeing up your other VCAs.

• Dual Analog ADSR envelopes with digital gate Pulser for trapezoid shapes
• Pulser stages P1 and P2 can be selectively routed to trigger each ADSR via panel switches
• Three timing ranges: (FAST: ~5 seconds, MED: ~35sec, SLOW: ~1min A/D times)
• Retrig input (allows re-triggering of the envelope if source gate held high)
• VCA input can be used to dynamically control the respective ADSR output level (bipolar) or to process signals to be modulated in amplitude by the ADSR.
• Manual GATE buttons for each envelope

• The Pulser can be thought of as a way to set both a gate ON time (T1) and an OFF time (T2). In this way, you could configure a cycling ADSR that has a gate time that is different from the interval between gates.
• Alternatively, you can create a sequence where ADSR2 is triggered by a delayed amount of time after ADSR1 is triggered (either cyclically or in a single shot sequence).
• The panel switches for routing or disabling the pulse sources allow for even more complex combinations of control beyond these examples. This special combination of functions can yield a plethora of interesting and organic envelope and gate patterns to be created; cyclical and single shot.

• A pulse is made of individually controllable T1 and T2 stage lengths
• CV control over T1 and T2 time
• Pulser can be one-shot (SINGLE) or repeating (CYCLE)
• PULSE output has a switch to select P1 or P2 as the source.
• Pulser stages P1 and P2 can be selectively routed to trigger each ADSR via panel switches
• START trigger input for starting/restarting the Pulser sequence
• Manual GATE button to trigger the Pulser sequence

• 14 HP Eurorack format module
• Maximum depth: 1.4"
• Includes power ribbon cable with Eurorack power headers
• Power consumption: +12V: 66mA, -12V: 49mA

Related Questions and Answers

Q: 1. Where can I buy the magnetic adapter?

A: Please see attached link for BH #HAHLM600CL • MFR #HL-MODULE-600CLAMP and for B&H # HAHLM360CL MFR # HL-MODULE-360CLAMP 360: https://bhpho.to/3oeaGuS 600: https://bhpho.to/3pN8Scv

Q: 2. Can I reformat the drive in the Ki Pro Ultra to a different file system, or do I have to keep exFAT as exFAT?

A: Yes...you can choose between exFAT (best for compatibility) or HFS+ (the Mac files system)

Q: 3. Does anyone know if it will fit the Edelkrone SliderPLUS PRO XLarge?

A: Yes it will.

Q: 4. Can I buy the magnetic adapter from B&H? Please provide link.

A: Please see attached link for BH #HAHLM600CL • MFR #HL-MODULE-600CLAMP and for B&H # HAHLM360CL MFR # HL-MODULE-360CLAMP 360: https://bhpho.to/3oeaGuS 600: https://bhpho.to/3pN8Scv

Q: 5. Will this go completely clear or will I need to remove it to have no neutral density?

A: You will need to remove it to not have any ND.

Q: 6. does it work with the small slider plus...it is not listed with the accessories or anywhere else?

A: does it come with the gear belt?

Q: 7. What is the purpose of the radar modular for the Thinkware U1000 dashcam?

A: The TWA-RDR Radar Module from Thinkware reduces power consumption by the U1000 dash cam when set to Energy Saving Parking Mode 2.0 to extend its duration. It detects motion to enable the U1000 to save a 20-second video clip that captures 10 seconds of video before and after an impact to a microSD card. Please note: This device should be installed away from the metal parts of your rearview mirror and ADAS sensors. Professional installation is recommended.

Q: 8. I see the GPS module is compatible with the Ronin 4D. When used together, will it write GPS metadata into the 4D video files?

A: DJI does not mention that you will be able to receive metadata. DJI says it allows you use the DJI Ronin 4D with the Ronin-S External GPS Module, it can enhance the stabilization performance of the gimbal roll axis during rapid acceleration.

Q: 9. Does this work w the ef turbo mount?

A: The Z CAM eND Module for E2 Flagship Series can only be used with the PL and EF mounts for the Z CAM E2 cameras.

Q: 10. Does this work with the Ronin SC?

A: Unfortunately, th DJI Ronin-S External GPS Module is only compatible with the DJI Ronin S as the connection type is a 4 pin connector specific to the Ronin S.