The Flex Plus 12" High Bright Teleprompter with 15mm Blockfrom Flex Plus 12" High Bright Teleprompter with 15mm Blockfeatures a 60/35 beamsplitter glass, a 12" reversing monitor, and a sled base mount. The teleprompter supports nearly any camcorder, ranging from DSLR to ENG, or you can add a separately available iPad/tablet mount. The teleprompter comes with an aluminum extrusion frame, which enables mounting the camera on the prompter without requiring counterweights. Also included is a 15mm LWS rod mounting block for adding optional 15mm rods to your rig.

The backlit 12" monitor features built-in reversing, 1000 cd/m² brightness, VGA, HDMI, and composite inputs, and it is readable from 6' away. A separately available keyboard allows you to type text into the downloadable TeleScroll prompting software for macOS or Windows. The 60/35 glass does not have to be removed when folding the hood for transport or storage. You can mount the camera to the prompter and mount that setup onto your tripod using the sled base.

60/35 Beamsplitter Glass    Back Sled Mount with Riser Blocks    15mm LWS Rod Mounting Block    12" Reversing Monitor, 1000 cd/m²    VGA, HDMI, and Composite Inputs    Designed and Assembled in the USA

The 60/35 beamsplitter glass provides a bright overlay of text that can be read from up to 6' away, while remaining invisible to your camera.

Supports most cameras including camcorders, DSLRs, and ENG types.

The sled kit enables mounting the prompter and your camera onto an optional tripod.

Includes 12" backlit reversing monitor with VGA, HDMI, and composite inputs.

Can be easily folded for secure transport and storage.

Related Questions and Answers

Q: 1. can the receiver connect to the mac/computer so that OBS can recognize it as a video/audio source for streaming?

A: The High-Bright Remote RX Monitor does not have a video output to send a video signal.

Q: 2. Does the monitor and system support fractional frame rates? Eg 23.976 fps

A: Yes, the DJI Transmission with High-Bright Monitor Combo does support the fractional frame rates 23.98fps, 29.97fps and 59.94fps in 1080p and 59.94fps in 720p.

Q: 3. With the handgrips mounted on the combo can you remote control the gimbal and focus on the inspire 3?

A: The DJI Transmission Combo can both control the gimbal on the Inspire 3 as well as pull focus on the camera.

Q: 4. Does this work with the "DJI Ronin 4D 4-Axis Cinema Camera 8K" (BH #DJRONIN4D8K) in a full featured way?

A: Yes, the DJI Transmission with High-Bright Monitor Combo, is designed to work with the DJI Ronin 4D 4-Axis Cinema Camera 8K with full compatibility.

Q: 5. How long does this last with DJI single battery?

A: The DJI LiPo Battery Pack for DJI CrystalSky & Cendence (7.6V, 4920mAh) BH #DJWB37 • MFR #CP.BX.000229 will last approximately 4 hours powering the DJI High-Bright Remote Monitor BH #DJHBRM.

Q: 6. Is there a way to output the image without the adapter from this monitor?

A: The DJI High-Bright Remote Monitor does not offer an output such as SDI or HDMI.

Q: 7. Can the Tilta Advanced Ring work with this? i’m looking to use lidar and the new cable hub and this without the ronin 4 grips

A: The DJI Transmission with High-Bright Monitor Combo can remotely control the Gimbal when mounted to the ring, but not necessarily the ring itself.

Q: 8. Can this control more than one Ronin 4D?

A: At the moment, the DJI High-Bright Remote Monitor can only control one Ronin 4D.

Q: 9. Where can I purchase a power cord?

A: As of this time DJI is not offering a power cord for the DJI High-Bright Remote Monitor (B&H# DJHBRM), but you can use this: Power2000 AC-F550 AC/DC Adapter with Sony L-Series Dummy Battery (B&H# POACF550) https://bhpho.to/3wlnZPu

Q: 10. Is there any way to get a picture *out* of this? A BNC or HDMI output that I could connect to a remote switcher and have the feed from the Ronin a switchable source? If so, I'm assuming a micro-second of latency?

A: No direct out exists on the DJI High-Bright Remote Monitor. You would have to record from its wireless transmission.