Xpg Starker Air Mid-tower Case Black
- Product Code: eq170917
-
Build your computer with style while saving desktop space with the black XPG STARKER AIR Mid-Tower Case Blackfrom XPG. Supporting ATX, micro-ATX, and mini-ITX motherboards, this compact mid-tower chassis features a magnetic mesh front panel that helps to provide high airflow to components while letting LED illumination shine through. The removable bracket allows you to configure seven horizontal or four vertical expansion cards, depending on your preference. A detachable plate allows you to mount either two 2.5" SSDs behind the motherboard tray or one 3.5" HDD above the PSU compartment. At the bottom is a bay that can fit up to two 3.5" drives or one 3.5" drive with a 2.5" SSD on top.
A 120mm front fan is included along with a 120mm ARGB rear fan, providing efficient cooling to components. You can install up to a 360mm front radiator, a 140mm top radiator, and a 120mm rear radiator for liquid cooling. The slide-out front dust filter makes it easy to keep your system clean while showing off your internal components through the tempered glass side panel. Adorning the front are two ARGB LED strips, and you can switch between 13 pre-programmed lighting effects at the touch of a button.
ATX, Micro-ATX, Mini-ITX Support 1 x 3.5" Drive Bay + 2.5" / 3.5" Mount 2 x 2.5" Drive Mounts 7 x Expansion + 4 Vertical Slots 2 x USB-A 3.2 Gen 1 3.5mm Audio In / Out Includes 120mm Fan & 120mm ARGB Fan Glass Side Panel Front ARGB Light Strips SPCC Steel Construction
Key Specs | |
---|---|
Motherboard Support | ATX, Micro-ATX, Mini-ITX |
Internal Drive Bays | 1x 2.5" and 1x 3.5" or 2x 3.5" |
Drive Mounting (Non-Bay) | Motherboard Tray 2x 2.5/3.5" or Motherboard Tray 1x 3.5" |
Expansion Slots | 7x Full Height + 4 |
Maximum GPU Length | 13.8" / 350 mm |
CPU Cooler Height | 6.5" / 165 mm |
Fans Included | Front: 1x 120 mm Non-LED (Unspecified rpm) Rear: 1x 120 mm LED (Unspecified rpm) |
I/O | 2x USB-A (USB 3.0 / 3.1/3.2 Gen 1) |
Windowed Panel | Yes |
Built-In Lighting | Yes |
Tool-Less Design | Thumbscrews |
Compatibility | |
Motherboard Support | ATX, Micro-ATX, Mini-ITX |
External Drive Bays | No |
Internal Drive Bays | 1x 2.5" and 1x 3.5" or 2x 3.5" |
Drive Mounting (Non-Bay) | Motherboard Tray 2x 2.5/3.5" or Motherboard Tray 1x 3.5" |
Expansion Slots | 7x Full Height + 4 |
Maximum GPU Length | 13.8" / 350 mm |
CPU Cooler Height | 6.5" / 165 mm |
Supported PSU Size | ATX |
Maximum PSU Length | 6.3" / 160 mm |
PSU Mounting Location | Bottom |
Cooling | |
Fan Mounting | Front 3x 120 mm or 2x 140 mm Rear 1x 120 mm Top 2x 120/140 mm |
Fans Included | Front: 1x 120 mm Non-LED (Unspecified rpm) Rear: 1x 120 mm LED (Unspecified rpm) |
Maximum Radiator Size | Front: 360 mm Rear: 120 mm Top: 280 mm |
Filter Locations | Front |
Inputs / Outputs | |
I/O | 2x USB-A (USB 3.0 / 3.1/3.2 Gen 1) |
Media/Memory Card Slot | No |
Audio I/O | 1x 3.5 mm Input/Output |
Display Outputs | No |
Physical | |
Windowed Panel | Yes |
Color | Black |
Material | Steel, Tempered Glass |
Built-In Lighting | Yes |
Tool-Less Design | Thumbscrews |
Security | No |
Cable Management Space | No |
Dimensions (W x H x D) | 8.5 x 18.3 x 15.7" / 215 x 465 x 400 mm |
The STARKER AIR Mid-Tower Case includes two 5 Gb/s USB-A 3.1 Gen 1 ports and 3.5mm audio input/output jack.
XPG STARKER AIR Series sports a functional and sleek front panel design with two ARGB light strips.
The on-rail front dust filter is easy to clean and helps to protect your components from dust build-up.
A replaceable bracket design allows you to mount your graphics card horizontally or vertically to show off its lighting effects.
This chassis supports up to six fans for efficient cooling. Or you can install up to a 360mm front, 280mm top, and 120mm rear radiator for liquid cooling.
Related Questions and Answers
Q: 1. Profoto Pro7 2400W can use?? Pro7 H 43cm..
A: Yes, this case will fit the Profoto generator perfectly. Nearly every rental house in the U.S. uses this case for their Profoto gear.
Q: 2. Will this fit profoto pro 11 packs?
A: Yes, the Tenba Transport Air Case for Profoto Pro-10 with 2 Heads can also fit the Profoto Pro 11 Pack.
Q: 3. Can I fit 8 Paul C Buff Einsteins in this?
A: 8? No way.
Q: 4. How much does the handle pocket subtract from the inside depth of the case?
A: 7/8th of an inch in depth. the pocket takes up a rectangle that is 7&3/8s x 21 inches, centered to the top side of the case. the non-retractable handle takes up an additional small space, protruding 1&3/4 x 3&1/2 into the main case. this is on top of the protrusion from the retractable handle.the wheels on the bottom also protrude into the main case, 2 x 2&1/2 cheers.
Q: 5. Anyone used this with Profoto D4 4800w/s packs? Based on dimensions three should fit no problem but want to make sure I'm not overlooking something.
A: Yes, they will fit easily. Most of the rental houses in the US. use this case specifically for their Profoto packs and heads.
Q: 6. Can you fit an Ursa Mini inside?
A: Hi Kyle! Sorry for my late response I was shooting on location and just access my emails. This is absolutely the best case I had very light and strong for protection. Yes I believe you can fit an Ursa Mini of course depends all the accessories that you may need. Thanks for your question!!!!! Warmly Denise
Q: 7. Is a shoulder strap included with this bag?
A: Yes, the Tenba Transport Air Case Attache 1914 includes a shoulder strap.
Q: 8. Can I put profoto 8a 2400w in this bag? with two heads.
A: Yes, this will easily fit.
Q: 9. In addition to the power pack and two heads, does this case also fit two zoom reflectors?
A: The spaces for the heads are narrow, only slightly wider than the heads themselves, and therefor there is not room to fit two reflectors (which are, by design, much wider in diameter than the heads). I will still keep the case, as it works well, but do not want others to be mislead.
Q: 10. can you check as baggage?
A: Yes. This is within 62inch in total dimension. Plus thats what pelican air is. They redesigned the product to be approved in the airplane dimension. It is also lighter than the orig pelican. I will not think twice buying this item again. Note this is not a carry on baggage.
Top Bestselling Products
Xpg Starker Air C Mid-tower Case Black
$284.97 $390.41
Xpg Starker Air C Mid-tower White Case
$284.97 $416.06
Xpg Starker Mid-tower White Case
$221.97 $328.52
Xpg Starker Mid-tower Case Black | Gaming Pc Case
$221.97 $288.56
Xpg Invader X Mid-tower Case Black
$507.00 $669.24
Xpg Defender Mid-tower Case Black | Gaming Pc Case
$251.97 $307.40
Xpg Invader X Mid-tower Case White
$507.00 $679.38
Xpg Battlecruiser Atx Mid-tower Case White
$362.97 $511.79
Xpg Defender Mid-tower White Case
$251.97 $388.03
Xpg Battlecruiser Ii Super Mid-tower Case White
$539.97 $804.56
Xpg Battlecruiser Ii Super Mid-tower Case Black
$539.97 $826.15
Fractal Design Pop Air Mid-tower Case Black Tempered Glass
$239.97 $376.75
Fractal Design Pop Air Rgb Mid-tower Case Black Glass
$269.97 $361.76
Cougar Mx430 Air Rgb Mid-tower Case White
$239.97 $347.96
Cougar Mx430 Air Rgb Mid-tower Case Black
$239.97 $369.55
Hyte Y70 Mid-tower Case Black White
$659.97 $956.96
Hyte Y60 Mid-tower Black Case
$539.97 $647.96
Fractal Design Pop Air Rgb Mid-tower Case Cyan Core
$269.97 $407.65
Fractal Design Pop Air Rgb Mid-tower Case Orange Core
$269.97 $388.76
Polsen Smartphone Interview Kit For 2 People
$359.52 $503.33
Products You May Like
Nikon Nikkor Z 100-400mm Lens Cover - Black
$149.85 $197.80
Azio Cascade Slim Esc Key Coffee
$104.97 $143.81
Countryman E6 Earset Mic For Audio Technica Wireless Transmitters
$1,379.97 $1,849.16
Slr Magic Microprime Cine 17mm T1.5 Lens Aps-c Sony E
$897.00 $1,210.95
Bretford Cube Cart 32-device Charging With 270° Doors Mustard
$3,827.85 $5,550.38
Comica Vm10 Pro Shotgun Mic For Cameras & Smartphones
$140.97 $204.41
Patriot 48gb Viper Elite 5 Ddr5 Memory Kit (2x24gb)
$479.97 $580.76
Cambo Acdb-990 Rotating Digital Back Adapter
$1,974.00 $3,118.92
K&m 12298 Led Piano Lamp Gold
$401.97 $558.74
Samson Expedition Xp800 Portable Pa System 800w
$2,303.97 $3,317.72
Transcend 4gb Ddr4 2400mhz Udimm Memory Module
$177.00 $226.56
Aida Imaging Full Hd Ndi Hx Ip Camera 20x Zoom
$2,085.00 $3,231.75
Simmod Diopter 4x5.65 +2 For Cinematic Lenses
$1,767.00 $2,279.43
Brevite Jumper Camera Backpack 18l Boulder Tan
$509.97 $729.26
Leofoto Lff-01 Mini Follow Focus For Filmmaking
$357.00 $521.22
Manfrotto 24.8" Magnetic Background Support
$359.64 $575.42
Platinum Tools T138 Cable Tester Smart Remote Kit
$440.55 $643.20
Fotodiox Wonderpana Freearc Core Unit Tokina 16-28mm Lens
$374.85 $532.29
Print File 120 Polypropylene Foldflap Sleeves 500 Case
$118.59 $187.37
Foama Carry-on Case For Red Komodo - Black Insert
$1,497.00 $2,080.83