The Brunton Omnislope Jacob's Staff Bundlefrom Brunton Omnislope Jacob's Staff Bundlemeasures angles in degrees, percent grade, and 66' forestry chains for land surveying purposes. The degree scale is broken up into 1° increments, and the inclinometer is accurate to within a 1/2°. Its illuminated dial ensures that the scales can clearly be seen even in low-light conditions. The inclinometer's lightweight, aluminum housing is durable and designed for years of field use.

A precision pendulum with a 180° range gives fast, smooth, and accurate readings of height and pitch. Height can be calculated using the percentage scale and the distance between yourself and the object to be measured. As an alternative, you can simply use the 66' forestry chain scale and read out the correct height without calculating anything.

Measure Angles & Object Heights    Degree, % Grade, Forestry Chain Scales    Precision Pendulum with 180° Range    Staff Length Adjusts from 25.5-62.5"    3-Section Aluminum Construction    Comfortable EVA Handle

Related Questions and Answers

Q: 1. What length does this extend to?

A: About an arms length, so I would say easily 3 feet.

Q: 2. Does this bundle come with the MiniTT1?

A: This kit comes with 3x TT5 and a AC3.

Q: 3. Will this work with the GH5 and 2 Elinchrom / Godox strobe lights?

A: HI! the one I have is for Nikon and works very well mixing strobes with plusX trigger and Nikon SB 700, 600 at the same time. I believe that if you choose the one for Panasonic will works well. Look is TT5 is for Panasonic also or just for Nikon, I remember that TT4 is for Canon

Q: 4. Does this controller work with the Canon XF605?

A: Yes the Manfrotto RC Pan Bar EX Remote Control for LANC Cameras would support and work with the Canon XF-605 camera. Also please add the following adapter to allow it to attach to a tripod handle. Adapter https://bhpho.to/3t08Frj

Q: 5. If I had a 3 flash set up, would I buy 3 of these? Or is there a receiver only model? (SB-700)

A: For three flash you would buy four, one for the camera and one per flash.

Q: 6. I have a Sekonic L-758DRlight meter. Can I use the Sekonic to send a signal to the Pocket Wizzard FlexTT5 and trigger my Canon ST-E3-RT Speedlite Transmitter that will in turn trigger my Canon 600EX RT.The Sekonic has the Pocket Wizzard radio.Please advise

A: Yes, accpording to PocketWizard that will work.

Q: 7. Two questions:1. Will the power icon power on a BMCC?2. Can the cord be extended a 100 ft or so?Thank you!

A: This lanc will not work with the power icon, or as they call it Stand-by button, when used with the BMCC. We do have a 100 foot extender cord from VariZoom that you can purchase though.

Q: 8. Will this work on a Panasonic AG-CX10?

A: Yes, the Manfrotto RC Pan Bar will work with LANC controllable cameras, such as the Panasonic AG-CX10.

Q: 9. Hi Will this FlexTT5 Transceiver Radio Slave for Nikon fit into the camera hot shoe and then remotely trig the camera from a handhold second one FlexTT5 .

A: he FlexTT5 Transceiver Radio Slave for Nikon can sit in the Cameras hot shoe, and with a remote camera cable you could use it to trigger the camera with a second FlexTT5. If your camera has the 10-Pin connection, you could use the N10-ACC (B&H # WIN90MACND). If your camera has the DC-2 connection, you could use the N-MCDC2-ACC (B&H # WICFTT5ND90).

Q: 10. Is this compatible with the Canon 5D Mark IV?

A: I'm using 5D III. I don't know about the new one.