Erica Synths Hi-Hats D Eurorack Module 10 Hp

Erica Synths Hi-hats D Eurorack Module 10 Hp

Product Code: eq171330
Availability: In Stock

$747.00 $1,187.73

Qty

12 reviews Write a review

Description
Reviews (12)

Modular synthesizer enthusiasts in need of classic digital hi-hats will appreciate the erica synths Hi-Hats D, a dedicated hi-hat Eurorack module that uses digital samples through a 6-bit discrete DAC, which provides an unmistakable crunch. The module can trigger two different hi-hat sounds (closed and open), each with their own analog VCA and analog envelope generator with decay controls.

An extra feature enables looping on the open hi-hat, where a certain part of the sample is looped while the envelope decay is on, creating a distinct, delay-like effect. This version of the Hi-Hats includes a connector on the back of the module that lets you access the internal routing system. If you have the erica synths Drum Sequencer (available separately), then you can trigger and accent signals in the Hi-Hats module internally, without using patch cables. The module includes a power ribbon cable and a set of mounting screws.

Classic Digital Open and Closed Hi-Hats Discrete 6-Bit DAC for Added Crunch Analog VCA and EG Tune and Decay Controls CV Control with Attenuators VCA Response Control Open Hi-Hat Looping Manual Trigger + Accent Input Module Depth: 1.8" (45mm) Includes Ribbon Cable & Mounting Screws

Key Specs
Sound Generation	Digital
Maximum Polyphony	Not Specified by Manufacturer
Audio I/O	1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output
MIDI I/O	No
CV/Gate I/O	2x 1/8" / 3.5 mm TS Trigger Input 3x 1/8" / 3.5 mm TS Pitch CV Input
Patch Points	No
Eurorack Current Consumption	56 mA on +12 V Rail 35 mA on -12 V Rail
Horizontal Pitch	10 HP
General
Item Type	Eurorack Module
Sound Generation	Digital
Keyboard	No
Expression Controls	No
Number of Pads	No
Display	No
Sounds
Maximum Polyphony	Not Specified by Manufacturer
Built-In Effects	No
Performance Functions	No
Built-In Speaker	No
Synthesis
Oscillators	2x Variable (Sample)
Mixer	No
Amplifiers	1x VCA
Envelopes	2x Amp Envelope Generator: Decay
Filters	No
LFOs	No
Sequencing & Recording
Sequencer	No
Arpeggiator	No
Connectivity
Audio I/O	1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output
Pedal Support	No
MIDI I/O	No
CV/Gate I/O	2x 1/8" / 3.5 mm TS Trigger Input 3x 1/8" / 3.5 mm TS Pitch CV Input
Control Voltage Level	CV In: ±5 V
Patch Points	No
Sync I/O	No
Network I/O	No
USB I/O	No
Media/Memory Card Slot	No
Audio Performance
Maximum Output Level	10 V p-p
Included Software	No
Mobile App Compatible	No
Power
Power Requirements	Eurorack Power
Eurorack Current Consumption	56 mA on +12 V Rail 35 mA on -12 V Rail
Physical
Color	Black
Horizontal Pitch	10 HP
Included Accessories	No
Packaging Info
Package Weight	0.455 lb
Box Dimensions (LxWxH)	8.1 x 4.8 x 2.4"

Discrete DAC
Analog VCA and EG
Tune and Decay controls
CV control with an attenuators over Tune and Decay
VCA response control
Open Hi-Hat looping
Manual trigger
Accent CV for better expression
Pins for connecting internally to erica synths Drum Sequencer
Power consumption: +56mA / -35mA
Module depth: 1.8" / 45mm

Related Questions and Answers

Q: 1. Hi:The AC/DC transformer needed for this Charger HIQ1CH1 is included?Thanks

A: AC for plugging in the wall (110/120v) is included in the purchase. i dont think it will handle DC but i will check

Q: 2. Can the slide show mix both photos and video?

A: Video and pictures need to be played separately.

Q: 3. how come the auto power on and auto power off features shut off after the time they are programmed for?I'd like to program the power so it comes on and off at a certain time every day without having to enable them after their times.

A: So sorry that I cannot help you. I gave it as a gift and have not heard from the person since. I wish you luck. It sounds like a great idea.

Q: 4. Will this fit on a Canon XA25 camcorder?

A: The Canon XA25 has a 16x9 OLED Screen that is 3.5 inches. This hood is designed for 16x9 screens that are 3.5 , it should work very well on the XA25.

Q: 5. Can I load photos via a flash drive?

A: Yes. We leave the flash drive in the frame and run the photos from there. Hope that helps.

Q: 6. What's the weight capacity?

A: The manufacturer does not list a weight capacity anywhere. However, the ikan IK-RSR6 will be able to support more weight than any tripod head you fix onto the riser.

Q: 7. Hi will this fit a canon c100 mark 2 ?

A: The previous answer is incorrect. The correct Hoodman hood for the C100MK2 is the H400. I just ordered it a couple days ago, it arrived today and is a perfect fit. The c100 has a 4:3 LCD screen, so any 16:9 aspect ratio will NOT fit.

Q: 8. Is it possible to check this into an airport without it being considered oversized?

A: its a bit tricky ,its not heavy or too bulky but it is little over then 4 feet ,you could check it in it is quit durable so a light casing ,simple light stand bag should do the job

Q: 9. Does it have a slide shuffle?

A: Sorry, I can't answer this question. We returned this digital frame, but I can't recall the reason why since it was over a year ago.

Q: 10. (1) What are the transition modes, as a sequence of photos is run? (I'd prefer to have a fade-out, fade-in.)(2) If I have a series of JPGs loaded, will it repeatedly cycle through them until it's turned off, or do I need to restart it for each cycle?(3) Is the interval (time before a picture changes) adjustable? If not, how long is a picture displayed?

A: I'm sorry ... I don't want to answer your questions because my Aluratek 15 Digital Picture Frame DIED exactly 1 month after it went out of warranty!

Carl	14/09/2024
[10 V p-p ] Plugged it into the uplink on a UDM Pro. Picked it up and worked perfectly with a 2.5Gbps port on my router. 5

Jonathan	12/08/2024
[0.455 lb] Really fun module. You can sample into it from outside your rack. Cool stuff 5

Jasmine	08/08/2024
[10 V p-p ] I haven't even watched the videos on how to properly use this groovebox yet, and I'm already having so much fun. It's my first after researching different samplers and grooveboxes. A video online helped me decide on this one as a beginner and I have zero regrets. I also appreciate that B&H matched a discounted price. 5

John	23/07/2024
[0.455 lb] Plug and play. Genuine Ubiquity gear. Working perfectly. 5

Daniel	19/07/2024
[Digital] Auto negotiates at 10G or 1G with UniFi switches seamlessly. Happy that it seems to run cooler than generic FS or other cheap modules out there. 5

Wes	04/07/2024
[Black] I put it in my USW Enterprise 24 PoE to provide a 10gbe port for a NAS. It runs at that speed and while it gets warm, it’s not what I’d call hot. Supposedly it’s cooler running than some other SFP+ 10gbe modules. 5

Thomas	02/07/2024
[10 V p-p ] The Novation Circuit Tracks is by far the greatest groovebox ever built. I bought the original Circuit the week it came out in 2015, fell in love instantly, and over the years trained myself to sequence better parts. The Circuit Tracks is a fantastic follow up with two additional MIDI lanes, newly added scene functionality, and an expanded sequencer featuring step duration for each individual pattern. The sound engine appears the same as on the original Circuit but the original Circuit had a bit of digital hum to it and that has completely been removed. The delay and reverb effects are quite useful at low settings for creating ambience and at longer settings quite useful at creating washes of sound. All the knobs make real-time tweaking a joy and all the macro knobs can be recorded in your sequences for looped use. The Novation Components editor is quite good for patch design and as a librarian for backing up your sessions. I wasn't able to use my microSD card with this, as it wouldn't usually stay in and, when I did get it in, it would not copy my entire session to a new session slot. I do think this was a defect of my unit and not a consistent hardware error. This thing is great for the studio and perfect for DAWless jams but my dream is to really get nitty gritty with it and tour with it. I believe that's what Novation would want. 5

Austin	02/07/2024
[Digital] I have been using this as a source for automated modulations and a sweeping sweet-spot finder in my patches, overall it frees up some sends for me and I find cool sounds faster 5

Derrick	22/06/2024
[10 V p-p ] exactly what I need. 5

Pierr	18/04/2024
[Digital] remember to split your eurorack modules even on the buss power, you have second row and you can put your power hungry modules in that row, also you get about 70mm depth on the bottom row as there is no obstruction from the bus board, use modular grid to sort out the arrangement, I got this in 2 days from B&H, incredible timing. Thank You Guys !! 5