Add two independent and great sounding drums to your modular setup with the erica synths Pico Drums, a Eurorack-compatible sample-based drum module with versatile control over different parameters and a huge collection of drum samples.

Choose between 64 samples for each drum; you can load your own using the optional Pico Drum programmer utility device. Each drum sound features independent control over pitch, decay, and level. The Exclusive switch selects how the two drums interact with each other when triggered at the same time. Pico Drums includes two trigger inputs and a single audio output that mixes both drum sounds. Chain up multiple Pico Drums and create the worlds smallest modular drum setup.

2 Independent Drum Sounds    64 Samples for Each Drum    Independ Control of Pitch, Decay, Level    Separate Triggers for Each Drum    Audio Output Mixes Both Drum Sounds    Exclusive Switch for Drum Interaction    Input Protection from Over Voltage    Module Depth: 1.4" (35mm)    Includes Ribbon Cable & Mounting Screws

• 2 independent drums
• 64 samples for each drum
• USB interface for user samples upload
• Independent control over Pitch, Decay and Level for each drum
• Separate triggers for each drum
• Audio output of mixed drum sounds
• Exclusive switch to select how the two drums interact with each other when triggered at the same time
• 12-bit resolution, 44 kHz sampling frequency

• 3 HP Eurorack format module
• Maximum depth: 1.4" (35mm)
• Includes power ribbon cable with 10-pin to 16-pin Eurorack power headers
• Power consumption: +12V: 35mA, -12V: 15mA

Related Questions and Answers

Q: 1. do we need the wifi?

A: The DNP DS620A, DS820A, QW410, DS-RX1HS, DS40, and DS80 printers can all work without the DNP WCM Plus Wireless Connect Module, but the module is a good option to print from phones, tablets, or computers without a wired connection.

Q: 2. Is this compatible with CFExpress?

A: No, NEXTO DI XQD Module for the NSB-25 is only compatible with XQD cards due to firmware imitations.

Q: 3. Is this module necessary to be able to run a Photo Booth?

A: The DNP WCM Plus Wireless Connect Module (B&H# DNWCMPLUS) allows for a wireless connection between an Android (e.g. phone or tablet) or Apple iOS-based device (e.g. iPhone or iPad) and specific models of DNP printers (e.g. DS620A, DS820A, QW410, DS-RX1HS, DS40, or DS80). It is only required for that purpose. Alternatively, printers such as those may be connected to many computers (typically using Windows or macOS) by USB cable.

Q: 4. does the focus module fit with with Pan + Tilt (Dual HeadONE)?

A: The HeadONE is not listed under compatible products. This focus module is compatible with the HeadPLUS and the HeadPLUS PRO.

Q: 5. Is this compatible with the Edelkrone SliderOne v2?

A: This requires a Head & Slide Module along with the Slider. If you are using the Head and Slide Module along with the SliderOne, it will work.

Q: 6. Will this trigger a Canon ST-E3-RT?

A: Unfortunately, it will not. This is for the Godox X wireless radio system.

Q: 7. Will this work on the L-558 meter?

A: No, the Sekonic RT-GX Godox Transmitter Module will only work with the following models. Lowepro DP Kit Sekonic Speedmaster L-858D-U

Q: 8. Before I buy this, I need to know if this will work with the Sekonic L-358? I see someone said yes, but when I did a search online everything I'm seeing it only works with the L858D-U.

A: No, The following unit is designed and made for the speedmaster L-858D-U Light Meter. Not the L-358.

Q: 9. Does this unit provide connection to Broncolor Grafit & Verso power packs equipped with original RFS system?

A: I contacted Sekonic concerning your inquiry. According to Sekonic, the original RFS receiver found in the older packs such as the older Broncolor Grafit A4 RFS Power Pack and the Broncolor Verso A2 RFS Power Pack work on 900 Hz radio frequency. The new transmitters/receivers which are found in the newer kits work on RFS 2/2.1/2.2, which use the 2.4 GHz radio frequency. As such, the newer radios cannot directly communicate with the older wireless radio system, and the Sekonic RT-BR Broncolor Transmitter Module would not talk to the power packs you own. As a work-around, you may purchase a Broncolor RFS 2 Receiver, B&H # BRRFS2R, and connect it to the sync terminal on your older power packs. While you will not have power control capability, you will be able to trigger the older power packs from a Sekonic meter with the installed RT-BR Broncolor transmitter module.

Q: 10. does this include the rods and lens gear?

A: It includes 1 Focus Module, 2 Rod for 3 Rod exension 4 Lens Gear 5 Calibration Chart 6 Clibration stand. The instruction manual can view here "https://cdn.shopify.com/s/files/1/2463/3081/t/5/assets/user-manual--focus-module.pdf?0032"