The SURGEX Squid Power Management Systemfrom SURGEX Squid Power Management Systemis an AC and DC power distribution unit with power conditioning, control, and monitoring. Thanks to its small form factor, you can mount it to a wall, a table, or against the face of an equipment rack. It features an internal web server that provides configuration, output control, monitoring, and the retrieval of data logs. Multiple security and communication interface options are also supported.

This PDU has one IEC320 C14 AC inlet, four IEC320 C13 AC outlets, two 5V USB-A ports, an RJ45 network port, a micro-USB port, and two recessed push buttons for hardware and software reset. There are also five DC terminal blocks with a 5V output, plus two output banks, each with two ports. Each DC output delivers 5A at 12V. Also featured is under-voltage auto shutdown that is adjustable from 0 to 300V, overvoltage auto shutdown that is adjustable from 125 to 300V, and overcurrent auto shutdown that is adjustable from 0.1 to 20A. All three of these may also be disabled.

The Squid's software offers a single solution for management, mitigation and control of a system's power. Its competencies include sequencing, scheduling, auto-ping, IP control and monitoring plus reduced service calls through proactive management. Its 360° of power protection helps ensure equipment remains up and running without disruption.

AC/DC Power Distribution Unit    Power Conditioning, Control & Monitoring    Four IEC320 C13 AC Outlets    IEC320 C14 AC Inlet    Operates Using 120V at 50/60 Hz, 12A Max    Five DC Terminal Blocks    DC Output 1: 5A at 12V    DC Output 2: 5A at 12V    Two USB-A 5 VDC Outputs    RJ45 Port | Micro-USB Port

• Universal 120V-240V AC input with IEC connectors
• 4 controlled and monitored AC receptacles
• 3 DC banks, 2 controllable
• Measures electrical parameters including voltage, current, power, frequency, power factor, and crest factor
• Time-stamped power quality events
• Internal storage with 30 days of max/min/avg electrical parameters
• Wired ethernet for web server (HTTP/HTTPS), 802.1x authentication
• TLS, SSL, SNMP V3, single sign-on
• Two 5V USB ports for charging
• Compact size fits along, behind, or near equipment

Related Questions and Answers

Q: 1. Is it EU version (220-240 VAC)?

A: DriveRack PA2.US version 120 V-50-60 Hz

Q: 2. can i use crossover settings on full range application 1? which it have only high output enable.

A: Thank you for your question. If you use the high output enable in a full range application you are by passing any crossover settings and it would basically be a line output

Q: 3. Does the battery in the grip have to be removed before the camera switches over to using the internal battery? I have long periods that I cannot move my camera even enough to remove the battery.

A: No, the battery does not need to be removed from the OM SYSTEM HLD-10 Power Battery Holder in order for the camera to use the internal battery.

Q: 4. Does it come with charging chords?

A: The IndiPRO Tools POWER POD Quad LP-E6 Universal Power System (14.4V) does not include cables.

Q: 5. Our rails are currently 1 1/4" thick. Will the wheels fit on our track?

A: No, the wheels only fit a 1" track as listed on the CAME-TV Power Dolly System for Tripods.

Q: 6. What does the HLD-10 weigh, with or without the battery?

A: The OM SYSTEM HLD-10 Power Battery Holder weighs approximately 8.4 oz / 242 g without the battery and terminal cover. The battery would add roughly 2.9 oz / 81 g.

Q: 7. Will the system allow all battery power to go to one 7.2 Device... 4 batteries for their entire charge time? Or is it two batters per one of the two 7,2V outputs?

A: The IndiPRO Tools POWER POD creates a convenient power source for one or two devices. It allows you to conveniently use one or two batteries for each of those devices at a time. When using two batteries per device, the POWER POD allows hot swapping one battery at a time so you can keep working. Unfortunately, you cannot use all four batteries at once for one device.

Q: 8. Does the HLD-10 have a plug-in power port on the end like the previous holder to a) charge the battery inside, and b) supply current to the camera from a wall outlet??

A: The OM SYSTEM HLD-10 Power Battery Holder can charge the battery internally but it is not an AC adapter.

Q: 9. Hi! Am I able to power my Dracast LED1000 with this accessory?

A: Unfortunately, the POWER POD is really made for less power hungry devices such as small cameras and their accessories. While you could get a cable and connect the POWER POD Quad LP-E6 to the LED1000, we would recommend against it. The POWER PODs maximum watt hour rating of 53Wh would last a little more than half as much as a 98wh V-mount or Gold Mount battery. This is the reason the Dracast LED1000 is designed to work with V-mount and Gold Mount batteries. One example of such a battery is the Switronix XP-L90A 14.8 VDC Lithium Ion Brick Battery B&H # SWXPL90A.

Q: 10. Does the battery holder have a slot or lug to attach a handgrip on the right side?

A: The Olympus HLD-10 does not offer a lug or slot on the right side to accept a hand grip. The Vello Hand Grip Strap with Arca-Style Quick Release Plate can be used, which mounts via the tripod socket on the bottom. https://bhpho.to/3KgPwHm