Erica Synths Fusion System Ii Eurorack Modular Synthesizer

Product Code: eq171537
Availability: In Stock

$7,377.00 $10,475.34

Qty

7 reviews Write a review

Description
Reviews (7)

Modular synthesizer enthusiasts in search of massive analog sound source will be thrilled with the erica synths Fusion VCO V2, a full analog VCO with a ton of distinct features. Based on the highly stable AS3340 circuit, the provides three simultaneous waveforms which track great over 8 octaves.

The VCO is coupled with a transistor-based suboscillator and detune function, which utilizes two BBD delay lines that function as a frequency shifter that mimics two detuned VCOs. The tube crunch knob provides distinctive tube overdrive, while an external input mixes an additional signal with the principal oscillator, resulting in sonic mayhem. The module includes a power ribbon cable and a set of mounting screws.

Includes 2 x Fusion VCO2 Fusion VCF3 Fusion Modulator Fusion VCA/Waveshaper/Ringmodulator Fusion Delay/Flanger/Vintage Ensemble 104 HP Skiff Case with Lid Includes External Power Supply

Key Specs
Sound Generation	Analog / Digital
Maximum Polyphony	Not Specified by Manufacturer
Audio I/O	4x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output 1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Input
MIDI I/O	No
CV/Gate I/O	1x 1/8" / 3.5 mm TS Pitch CV Output 3x 1/8" / 3.5 mm TS CV Input
Patch Points	No
Eurorack Current Consumption	228 mA on +12 V Rail 55 mA on -12 V Rail
Horizontal Pitch	14 HP
General
Item Type	Eurorack Module
Sound Generation	Analog / Digital
Keyboard	No
Expression Controls	No
Number of Pads	No
Display	No
Sounds
Maximum Polyphony	Not Specified by Manufacturer
Built-In Effects	No
Performance Functions	No
Built-In Speaker	No
Synthesis
Oscillators	1x Fixed (Sawtooth, Square, Triangle) 1x Fixed Sub (Square)
Mixer	No
Amplifiers	No
Envelopes	No
Filters	No
LFOs	No
Sequencing & Recording
Sequencer	No
Arpeggiator	No
Connectivity
Audio I/O	4x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output 1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Input
Pedal Support	No
MIDI I/O	No
CV/Gate I/O	1x 1/8" / 3.5 mm TS Pitch CV Output 3x 1/8" / 3.5 mm TS CV Input
Control Voltage Level	Modulation CV In: -5 to +5 V
Patch Points	No
Sync I/O	1x 1/8" / 3.5 mm TS Sync Input
Network I/O	No
USB I/O	No
Media/Memory Card Slot	No
Audio Performance
Maximum Input Level	10 V p-p
Maximum Output Level	10 V p-p
Included Software	No
Mobile App Compatible	No
Power
Power Requirements	Eurorack Power
Eurorack Current Consumption	228 mA on +12 V Rail 55 mA on -12 V Rail
Physical
Color	Black
Horizontal Pitch	14 HP
Included Accessories	No
Packaging Info
Package Weight	0.635 lb
Box Dimensions (LxWxH)	7 x 4.3 x 3.6"

Full analogue design
Great tracking over 8 octave range
Detune function for thickening the sound
-1 oct transistor based suboscillator
Tube overdrive circuit
External audio input
VCO synchronization
Simultaneous waveform outputs
Power consumption: +228mA / -55mA
Module depth: 1.7" / 42mm

Related Questions and Answers

Q: 1. Will this work to trigger an Alien Bee 400?

A: Yes, it does.

Q: 2. Will the arca plate bottom of the Tilta FX3 cage work with this?

A: Yes, the Tilta Full Camera Cage for Sony FX3 & FX30 (Black) and its provided Arca type plate can mount to the Tilta LWS Baseplate Adapter Type II (Black) included in the Tilta Modular 15mm LWS Baseplate Type II (Black).

Q: 3. With this device mounted on Nikon DF hotshoe, can I put the SB900 flash on top and still have it fire another remote flash simultaneously?

A: Sorry, I can't help. I shoot Canon w/ a Canon flash. I fire my flash remotely using the device on the hot shoe, manual flash only with my particular equipment. B&H customer service has been a great help for some of my questions in the past. You might try them.

Q: 4. Does it work with Canon S110? Thanks. helentutu

A: Don't know I have it on a D5Mark 3 but it should work on any camera that has a hot shoe. This is a great value and works with mutable remote flashes also work at the 50 to 75 foot range.

Q: 5. Can this trigger set be used to trigger a master flash and then in turn, a flash set to slave?

A: Yes.

Q: 6. Does it work with Canon S110? Thanks. helentutu

A: I only used it on my Nikon d330

Q: 7. What is the battery life on the Vello FreeWave? And do both transmitter and receiver use the same model battery?

A: The Vello FreeWave Fusion Basic 2.4 GHz Wireless Trigger System for Canon BH #VEFWB24C runs on 2x AAA for each of the transmitter and receiver. Battery run time varies on brand and type of battery used as well as how the unit is used.

Q: 8. Will this trigger work on a Canon PowerShot SX50 HS?

A: not sure, i didnt like it very much so i returned it. i hav canon 6D

Q: 9. can this work with a canon speedlite 270 ex II

A: No. It works with the Canon Speedlites that have wireless RF capabilities like the 600EX-RT, 600EX II-RT or the 430EX III-RT. It also works wit the YongNuo YN600EX-RT or the YN600EX-RT II

Q: 10. Will it work on a Nikon D610 and two SB-700 speedlights?

A: I assume so. I use Nikon D810 and D750 with White Lightening Mono lights, but it comes with all the connectors for using Nikon Speedlights plus it has a hot shoe so it should work for everything you need.

Austin	03/09/2024
[0.635 lb] I have been using this as a source for automated modulations and a sweeping sweet-spot finder in my patches, overall it frees up some sends for me and I find cool sounds faster 5

Derrick	21/08/2024
[Eurorack Power] exactly what I need. 5

Paul	07/06/2024
[Eurorack Module] It’s not an eight-voice polysynth with presets. But it truly is a system dedicated to exploring how analog modules can interact, and the sequencer is powerful. It’s a very good first Eurorack system, but also a very natural central unit for controlling and interacting with other modular gear. You can absolutely make interesting bass lines and melodies with this thing in the first few hours but my guess is I’ll be fiddling with it for years. I’m a fan. It’s what you make of it, but you can make a lot. 5

Paul	18/04/2024
[Eurorack Power] I already had a virtual Moog from Arturia Software, but it's great to have physical knobs to twiddle! 5

Thomas	01/04/2024
[Black] A lot of fun with some great tones! 5

Jonathan	30/11/-0001
[14 HP] Really fun module. You can sample into it from outside your rack. Cool stuff 5

James	30/11/-0001
[Eurorack Module] I preordered the VL2 based purely on my enjoyment of Pittsburgh's previous Taiga synth. The VL2 is a completely blank slate for you to dive in, experiment and tweak/build to your hearts desire. The new waveform/folding options are deep and the sequencer on this system is amazing. Create anything from polyrhythms and percussives to full on melodic arrangements, all complete with chance/scanning/scrubbing/fills/slides etc. The middle blue row (shared by both sequencers) is a terrific idea that opens up your modulation options in really fun ways that you may not fully realize until you get your hands on the system. Florist chorus/reverb and a longer delay (than the Taiga) are welcome effect additions to add flavor to any arrangement. I LOVE this synth. It's big, it's easy to touch and play and it sounds amazing. They nailed it once again. 5