Icon Pro Audio D4 Display For P1-X Daw Control Expander

Icon Pro Audio D4 Display For P1-x Daw Control Expander

Product Code: eq171592
Availability: In Stock

$537.00 $805.50

Qty

16 reviews Write a review

Description
Reviews (16)

Enhance your P1 mixing experience with the D4 Display from Icon. Designed specifically for use with the P1-X DAW Control Expander, this optional OLED screen features a dual-pole magnetic mount that easily attaches to the control expander and displays 8 channels of DAW mix information, simplifying the process of monitoring your mix and providing intuitive visual feedback right where you work.

8-Channel OLED for P1-X Shows Clear, Precise Session Information Connects via USB-C, Easy Magnetic Mount Track Names, Channel Metering, Panning Visual Data for Plug-In & EQ Parameters Track Color Details

General
Compatibility	Icon P1-X
Display
Panel Type	OLED
Display Size	Not Specified by Manufacturer
Touchscreen	No
Inputs / Outputs
USB I/O	1 x USB-C Female Input/Output
Power
Power Source	USB
Physical
Mounting	Bottom: 2x Magnetic Pole
Color	Black
Environmental Resistance	No
Cable Length	Not Specified by Manufacturer
Dimensions	11.7 x 2.8 x 0.7" / 297 x 71 x 17.7 mm
Weight	0.47 lb / 0.21 kg
Packaging Info
Package Weight	0.905 lb
Box Dimensions (LxWxH)	17.9 x 5.1 x 1.5"

The D4 is an OLED screen designed for use with the 8-channel P1-X control expander.
The screen offers a crystal-clear view of channel metering, stereo pan positioning, and track names.
When modifying plug-ins using your controller, the D4 allows you to access visual data about plug-in and EQ parameters.
The display exhibits track color details (contingent on the transmission of this data by your DAW through the Mackie Control Protocol).
Experience enhanced portability for your controller with the convenient magnetic mount.
The D4 easily connects to the P1-X via the included USB-C cable.

Related Questions and Answers

Q: 1. hi, when using shotgun mic like MKE 600 or MKH 416 does it still need XLR cable to connect to P1 or you can just plug directly?

A: Plugging a microphone directly into an XLR input jack is never recommended. Remember that, by the principle of leverage, the force exerted on the connector will be proportional to the length of the mic. You can very quickly end up damaging the pins, or even the jack itself, and when phantom power is involved you also risk a short circuit if this happens. Always use a cable, even if it is a very short cable with low-profile connectors.

Q: 2. Will this work with Li-ion/IMR: 1. EBL 14500 2. Garberiel 18650 3.Ni MH AA Panasonic Eneloop Pro?

A: Yes. The following is Compatibility with all batts mentioned 1.2V Ni-Cd, Ni-MH: A, AA, AAA, AAAA, C, D, Sub-C (SC) 3.6V/3.7V Li-ion/IMR/INR/ICR: 10340, 10350, 10440, 10500 (R25), 12500, 12340, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16340, 16500, 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650, 32650

Q: 3. Could I use this to power my Rode NTG1 and output to a XLR to 3.5mm adapter cable to input into a Canon 90D?

A: Yes, the Xvive Audio P1 Portable Phantom Power Supply with Rechargeable Battery can be used to provide phantom power to the Rode NTG1 Shotgun Microphone, and its output signal can be adapted for a 3.5mm input connection to a DSLR camera.

Q: 4. What are the connections needed to recharge? I'm hoping it is usb-c?

A: The USB port on the Xvive P1 Portable Phantom Power Supply is micro-USB Type-B. There is a USB cable included which is micro-USB Type-B to Type-A. The USB port can be used for charging the internal battery as well as for powering the P1.

Q: 5. Is this the right colorimeter for the BenQ SW321C 32" 16:9 4K HDR IPS or is the Plus the one?

A: The Calibrite Display Pro HL Colorimeter should be sufficient for calibrating the BenQ SW321C 32" 16:9 4K HDR IPS Photo and Video Editing Monitor.

Q: 6. Can this charge single battery? Usually chargers require two at once

A: Yes, when using the ikan DLYFULL D4 Smart Charger, one can charge a single battery.

Q: 7. Can I use this to calibrate Hisense U7H? I have see that Tv have the option for calman calibration services

A: The Calibrite Display Pro HL Colorimeter (B&H # CACCDIS3HL) can technically be used with the Hisense U7H display, but it will only perform effectively when the TV is being used as an external monitor for a connected computer. As the Hisense U7H is designed as a TV, it does not have the same picture settings as a computer monitor that would typically be calibrated with a device like this.

Q: 8. is this the best Calibate product to calibrate a Benq PD Series monitor?

A: Yes, the Calibrite Display Pro HL Colorimeter would be the best fit for calibrating the PD line of monitors from BenQ.

Q: 9. Can this be used to calibrate the SmallHD Vision 24 inch monitor?

A: No, the Calibrite Display Pro HL Colorimeter would not work by itself with the SmallHD Vision 24. However, the following Black Magic LUT Box will allow you to use the Portrait Displays C6-HDR High-Dynamic-Range Colorimeter would allow you to calibrate your display. Blackmagic Design Teranex Mini SDI to HDMI 8K Converter and Monitoring Solution BH #BLTMSDIHDMI8 Portrait Displays C6-HDR High-Dynamic-Range Colorimeter BH #POCMETC6H

Q: 10. Can the Xvive P1 Phantom PS be connected to a TS mono mic level audio input using a XLR female to 3.5 TS mini jack cable?

A: Yes, you can use the Xvive Audio P1 Portable Phantom Power Supply to connect an XLR microphone that requires phantom power to a 3.5mm microphone input using an XLR female to 3.5mm TS male mini-jack cable.

Robert	22/09/2024
[OLED] Perfectly maps all essential functions in Logic and has significantly speeds project workflow. Third party plugins also map to this streamlining automation, mastering and parameter adjustment. Highly recommend for any Logic user. 5

James	14/09/2024
[Black] I have a few cameras that will not provide phantom power and this is doing the job of allowing me to use mics that need power. The signal through it has been crystal clear for me. And I can't tell you how much I love that it is rechargeable. No need to replace batteries. I've yet to even come close to it running out of power (says it lasts up to 40 hours!), but the fact that you can attach a portable power bank to keep it running if need be is nice to know. That is fantastic. To be able to change between 48v and 12v is a great feature. I'm super happy with this product. 5

John	13/08/2024
[0.905 lb] We need some way to supply phantom power to a condenser microphone feeding into a Sennheiser wireless transmitter. This proved to be the perfect solution. Its construction is first class and it works flawlessly. We're so thankful we were alerted to this product and highly recommend it. 5

Dan	12/08/2024
[OLED] Used to combine a pair of Behringer C-2 condenser mics into a single channel, creating a wide cardioid. Much higher gain (20 dB) than using a simple dual XLR-F to XLR-M Y-cable. Only wish there was a better way to attach to a mic stand than zip ties. 5

Jay	28/07/2024
[USB] Works Perfect! 5

Elliott	18/07/2024
[0.905 lb] This is a fantastic solution to powering a mic. I use a Sennheiser MKE600 and although it can be powered via AA batteries, I don't trust that they'll last an entire day of shooting, nor is there a way to monitor the power level at a glance. This solves all of that. Clear power indicator lights, all-day battery, and it's rechargeable. As other reviewers have stated, my only wish is that it had a 1/4-20 threaded hole so I could mount it to my camera. I made it work using hi-strength velcro and a rubber gear-tie from Lowes but it would really be perfect if it had a threaded mount. Overall still very satisfied, and I got it used for about $30 bucks. So this solves your mic power for about the price of two packs of AA's. 5

DrummerDave	04/07/2024
[0.905 lb] I use this box if my board runs out of channels. Sometimes I'll use it for 2 rack or floor toms depending on my setup, I have used it on 2 overhead condensers (transmits phantom power from board) just have to make sure to bring them up in the mix since it runs -10db. I use it live and in studio. I'll use it for 2 of the same horns too (trumpets) to save space on the board live 5

Arthur	14/06/2024
[0.905 lb] Brilliant software. Quite expensive, but really a time saver 5

Salvatore	13/06/2024
[0.905 lb] Not a mixer but if you have fairly balanced mics it is a cheap blender/ splitter. The item did as advertised, important to use identical mic's and crank up the volume. It's a simple fix for several AV/LiveSound issues. If you're running a Mono system, this lets you use a single channel for a stereo device (2 actually). tape/CD decks, computers, iPods, handheld recorders typically have RCAs, and those cables are always handy. I prefer an RCA to 1/4 inch, but they're not always at arms reach, and it doesn't solve the stereo/mono issue. It also let's you put 2 devices on a single channel if you have a smaller board. Lastly, many boards have RCA inputs for CD/Tape/Computer, but they don't let you EQ them or assign them to sub buses. It's just a convenient device to have around, especially for smaller boards and when you don't need stereo (like in a general PA setup). 5

Dale	26/05/2024
[USB] I’ve been looking for something like this for years and until now it just didn’t exist. Sure, there are generic control surfaces for DAWs but nothing that lets you get direct hands on control with literally any plugin. The plugin auto mapping is actually pretty good but it’s also very easy to set up your own custom maps with the learn mode and included editor, and the ‘select’ mode that allows you to control any plugin parameter with the fader is super handy. I love it. 5