The SURGEX Squid Power Management System | Efficient Energy Controlfrom SURGEX Squid Power Management System | Efficient Energy Controlis an AC and DC power distribution unit with power conditioning, control, and monitoring. Thanks to its small form factor, you can mount it to a wall, a table, or against the face of an equipment rack. It features an internal web server that provides configuration, output control, monitoring, and the retrieval of data logs. Multiple security and communication interface options are also supported.

This PDU has one IEC320 C14 AC inlet, four IEC320 C13 AC outlets, two 5V USB-A ports, an RJ45 network port, a micro-USB port, and two recessed push buttons for hardware and software reset. There are also five DC terminal blocks with a 5V output, plus two output banks, each with two ports. DC Output 1 delivers 2.5A at 24V, while DC Output 2 delivers 5A at 12V. Also featured is under-voltage auto shutdown that is adjustable from 0 to 300V, overvoltage auto shutdown that is adjustable from 125 to 300V, and overcurrent auto shutdown that is adjustable from 0.1 to 20A. All three of these may also be disabled.

The Squid's software offers a single solution for management, mitigation and control of a system's power. Its competencies include sequencing, scheduling, auto-ping, IP control and monitoring plus reduced service calls through proactive management. Its 360° of power protection helps ensure equipment remains up and running without disruption.

AC/DC Power Distribution Unit    Power Conditioning, Control & Monitoring    Four IEC320 C13 AC Outlets    IEC320 C14 AC Inlet    Operates Using 120V at 50/60 Hz, 12A Max    Five DC Terminal Blocks    DC Output 1: 2.5A at 24V    DC Output 2: 2.5A at 24V    Two USB-A 5 VDC Outputs    RJ45 Port | Micro-USB Port

• Universal 120V-240V AC input with IEC connectors
• 4 controlled and monitored AC receptacles
• 3 DC banks, 2 controllable
• Measures electrical parameters including voltage, current, power, frequency, power factor, and crest factor
• Time-stamped power quality events
• Internal storage with 30 days of max/min/avg electrical parameters
• Wired ethernet for web server (HTTP/HTTPS), 802.1x authentication
• TLS, SSL, SNMP V3, single sign-on
• Two 5V USB ports for charging
• Compact size fits along, behind, or near equipment

Related Questions and Answers

Q: 1. Do they offer a kit with three motors (one for focus, one for iris, and one for zoom) or do I need to buy this kit with an additional motor?

A: Because the motor alone is discontinued the only way we have to add a servo motor is by purchasing another kit. The Tilta Nucleus-M Wireless Lens Control System normally only includes two motors.

Q: 2. By using 2 motors in the package of tilta ,how can we control 3 function of focus,iris,zoom?,dr asok

A: You have to buy a 3rd motor for that. The kit comes with two motors and leaves room in the case for a 3rd if you want to upgrade for all 3.

Q: 3. Does the Right Handgrip display the battery level?

A: The Nucleus M handgrips do not have a battery level indicator in them. They do, however, have a voltage read out that can give you an idea of when the battery is low. If the handle is around 7v then you will want to swap out the batteries.

Q: 4. Does this unit control other BlueBolt units on the network?

A: Not directly, you need to have BlueBOLT-CV1 and RS-232C cards.

Q: 5. How is the range holding up with walls and obsticles between the hand unit and motor and what are those ranges?

A: The Tilta Nucleus-M has a 1000' / 304m wireless line-of-sight range. It's hard to test and know exactly the range between different materials and interferences but the signal should be fine.

Q: 6. Is it possible to zoom and focus with one hand?

A: It is not designed to allow zooming and focusing with one hand.

Q: 7. Can I charge the eneloop pro AA 2550mAh optimally on this charger? I mean, full-fast charge, like with the eneloop charger...

A: It will charge the 2550 mAh eneloop batteries faster than the eneloop Pro charger. Eneloop Pro AAs will fully charge in less than 9 hours.

Q: 8. can i charge 12 x AA NiMH 2850 mAh simultaneously with this charger ?

A: Yes, you can charge up to 12 AA NiMH batteries simultaneously with the Ansmann ENERGY 16 PLUS charger.

Q: 9. Can you mount the right handgrip on the Red Komodo Outrigger handle?

A: You could probably mount the Tilta Nucleus-M Wireless Lens Control System Partial Kit V's right handgrip to the RED DIGITAL CINEMA KOMODO Outrigger Handle if you get creative enough, but we would not recommend it, as it would likely be awkward to handle.

Q: 10. Will this also control Panasonic projectors?

A: The Epson ELPSP10 PixiePlus Control System - BH #EPELPSP10 is not designed for compatibility with Panasonic or any other brand of projector.