The Vicoustic VicStrip Spacer Kit Brown Oakis an acoustic kit that improves the innovative slat panel VicStrip by using the frame structure of a VicSpacer XXL with an air gap and an additional layer of PET to enhance its acoustic performance. It has been engineered for demanding rooms, such as home cinemas and hi-fi listening spaces.

For Hi-Fi and Home Cinema

The acoustic performance improvement with the two layers of PET and air gap makes the decorative VicStrip a sound-absorbing panel designed for select home cinema or hi-fi listening rooms.

• A black frame around the entire structure of the VicSpacer XXL gives VicStrip a new decorative look.
• An air gap of 40mm between the panels and the wall is achieved behind the wood structure, which was conceived to optimize the acoustic response of the panel.
• A layer of VicPET Wool with 8mm is assembled behind the VicStrip panels which reach 12mm, making the panels a double-layer with around 20mm of PET to enhance sound absorption.

Related Questions and Answers

Q: 1. Does this need to constantly be plugged in and stay on 24/7? Or can I unplug it and leave it off on days when it's cooler with less humidity?

A: For best results, you'll want to leave it plugged in so that it can regulate humidity properly.

Q: 2. I lost the keys of this 80L cabinet, and I wonder where I can purchase a replacement?

A: You may reach out directly to Ruggard by phone at 1-212-594-2120 to obtain a replacement.

Q: 3. can I store my lenses and camera in the Rugged without first putting them in the lens or camera?

A: Response: I store all of my camera lens's detached from the camera bodies. However, I see no issue with having the lenses attached if you prefer.

Q: 4. Does every owner store their equipment with the batteries installed? I'm probably a bit paranoid about batteries & heat...

A: Although the EDC cabinets incorporate a temperature display, they do not generate any heat, they do not cool, they do not adjust or regulate temperature at all.

Q: 5. How far away from a wall must the cabinet be located?

A: To allow proper moisture wicking, simply having the Ruggard 90L Dry Cabinet's moisture sync slightly away from the wall would typically provide adequate space and venting. I would recommend 2-5 inches away from the wall or as much as you can adequately provide for optimal operation.

Q: 6. I am unsure if the temperature display, humidity display, and buttons have a protective film to peel off. I don’t want to force anything. Is there a protective film?

A: This unit may have a protective film, try using duct tape to see if any film lifts off the display.

Q: 7. Is this required to put an AT875R on the Sony FX6?

A: The Audio-Technica AT875R Short Shotgun Microphone comes with two rubber O-rings to help the mic fit securely in a camera's mic holder. You may need to use the O-rings with the Sony FX6 Cinema Camera. The Auray Rubber Spacer Sleeve for XLR Shotgun Microphones is just another option and works in the same manner, but it's larger and may be easier to keep in place. Both are used for the same purpose. We also sell the O-rings separately - Sanken ROCS Rubber O-Rings for CS-1 - 10-pack (B&H # SAROCS).

Q: 8. Will this fit a Deity S mic 2s?

A: The Auray Rubber Spacer Sleeve for XLR Shotgun Microphones on Camcorders, will fit the Deity Microphones S-Mic 2S Moisture-Resistant Short Shotgun Microphone, the spacer is short enough not to cover the capsule area of the microphone.

Q: 9. Can the 50L fit a canon 70-200mm?

A: Yes, the Ruggard EDC-50L Electronic Dry Cabinet (Black, 50L) will fit a Canon 70-200. A 70-200 lens is usually 8 inches long and the 50L is 11 inches wide so it will fit.

Q: 10. 90L cabinet, the photos show 3 shelves but the description says 2 shelves. Which is it?It's only 2 can another be purchased from Ruggard? Thanks

A: Yes. The following unit has 3 shelves to offer its end-user.