Designed for both portable and permanent install applications, the Turbosound MILAN M10 is a portable 10" two-way powered loudspeaker featuring two independent input channels (Mic/Line), a two-band master EQ (Bass, Treble), intelligent limiting, and a Mix Out function for connecting additional powered loudspeakers for easy system expansion.

The 600W Class-D amplifiers deliver 500W to the 10" high-excursion woofer and 100W to the 1" high-temperature dome compression driver, which combine for a frequency response of 55 Hz to 18 kHz (±3 dB) and a maximum SPL of 126 dB, plenty of volume to cover 300 patrons. The M10’s discrete inputs are each equipped with balanced, combo XLR-1/4" connectors and a level control, making them ideally suited for a wide range of music sources, from low-impedance microphones, acoustic guitars and keyboards to mp3 players and mixing consoles.

For Portable and Install Applications    1100W Class-D Amplifier    10" Woofer and 1" Compression Driver    Klark Teknik DSP for System Control    55 to 18 kHz Frequency Response    126 dB Maximum SPL    90x60° (HxV) Dispersion    Dual Angle Pole Cup + 6 x M10 Fly Points    Includes Power Cord

• 2-way full-range powered loudspeaker for portable PA and install applications
• 600W power featuring Klark Teknik Class-D technology
• Klark Teknik Digital Signal Processing for total system control
• High-excursion 10" low-frequency driver with low-mass voice coil for improved transient response
• 1" high-temperature dome compression driver with extended high-frequency reproduction
• Converging elliptical waveguide provides wide dispersion and excellent pattern control
• Speech/music switch featuring optimized equalization for voice or music applications
• Switchable 100 Hz high-pass filter for subwoofer integration
• Lightweight composite enclosure with black finish
• Rugged powder coated perforated steel-mesh grille
• Dual-angle pole mount for accurate audience coverage
• Multiple internal rigging points for installation applications

From the instant your signal enters the MILAN M10, the built-in DSP (Digital Signal Processor) takes over, ensuring the highest possible signal integrity. Much more than just selective EQ enhancement, the M10's 24-bit DSP analyzes the incoming signal and intelligently applies specific filters to actually improve the sound quality. It is very much like having an audio engineer monitoring the input and output signals of each M10, dialing in the perfect EQ, and constantly making subtle adjustments to the crossover, compressor/limiter and more, which all adds up to significantly better sound.

Thanks to revolutionary Class-D amplifier technology, the M10 is able to provide enormous power and incredible sonic performance in an easy-to-use, ultraportable and lightweight package. Class-D amplification offers the ultimate in energy efficiency and eliminating the need for heavy power supplies and massive heat sinks. The lightweight Switch Mode Power Supply, coupled with the industry-leading Klark Teknik Digital Signal Processing (DSP) module, provides dynamic equalization and sophisticated limiting functions, ensuring optimal performance and long-term reliability.

With its 1100W of pristine digital output delivered through separately powered drivers courtesy of true bi-amping (two amplifiers per speaker system), the M10 delivers high-resolution sound that brings out the best in your music.

The MILAN M10 loudspeaker features a high-excursion 10" LF and 1" high-temperature dome compression driver to perform flawlessly in conjunction with every other element for truly professional results.

The M10's HF compression driver is mated to a specially designed converging elliptical waveguide, which provides a smooth and pristine midrange to high-frequency transition while maintaining wide dispersion and exceptional pattern control.

The onboard mixer features a Level control for each input and a two-band master EQ, complete with a switchable low-cut filter (set at 100 Hz), which allows the M10 to provide superb clarity and projection when used as a wedge monitor or to ensure correct integration with subwoofers. An additional filter allows you to select Speech (for enhanced voice intelligibility) or Music for the broader frequency range required for the high-fidelity reproduction of musical content. A convenient Mix Out XLR connector sends a post-EQ mix of both input channels to additional powered loudspeakers, for fast and easy system expansion.

The M10's trapezoidal enclosure is fabricated from high-density polypropylene and is ribbed extensively (externally and internally) to eliminate resonances and provide an attractive and durable cabinet finish. The symmetrical 43° side angles allow the loudspeaker to be conveniently used as a floor monitor. A recessed carrying handle on the top is provided for easy lifting and transport, while the dual-angle, pole-mount socket allows the loudspeaker to be mounted on straight poles or speaker stands, either vertically or raised higher and angled down to optimize audience coverage. A total of six M10 rigging points are provided on the top and bottom of the cabinet for secure vertical or horizontal suspension in permanent installations using M10 shoulder eyebolts.

Related Questions and Answers

Q: 1. The two answers provided regarding whether the thumb support fits the M (Typ 240) appear at odds. Can someone clarify? Thank you.

A: The Leica M10 Thumb Support (Black) is not compatible with the Leica M (Typ 240) camera.

Q: 2. When you slide the Thumbs Support does it scratch the camera? or does it has rubber between the camera and the thumbs support?

A: YUP/its nicely protected and very helpful

Q: 3. Will this grip work on the Leica M8?

A: No, the M10 base is not the same size as the M8, M9 or the M type 240 or M-P type 240. They do have the same style grip for those previous bodies. Its a shame I traded mine in, I'd sell you my old one. Good luck!

Q: 4. Does it fit on leica M240 ???i wanna buy it but i got M240

A: It fits but it doesn't sit flush in the hot shoe, nor does it come all the way to the thumb dial.

Q: 5. What is the finish? Glossy or Mat?

A: It is black chrome (matte)

Q: 6. Will it fit Leica M262?

A: I had am M9 that I traded-in for my M 10 and I could not usemy M( grip . . . however, B&H gives you a solid 30-day returnpolicy, so, under ordinary circumstances, the worst outcomewould be a return of the grip. (Why no look-up 'grip for Leica262'?)

Q: 7. Can the m10 still fit into the holster when using the hand grip?

A: The Leica M10 Hand Grip can still fit in the holster, but not with the "Finger Loop" connected.

Q: 8. will this grip work on Leica M7? and what's the weight of it?

A: The Leica M10 Hand Grip is not compatible with the Leica M7 film camera. Unfortunately, Leica didn't make a grip for this camera.

Q: 9. Will this fit the m11? And is it the same color of the silver m11?

A: The Leica M10 Thumb Support (Silver) is compatible with the M11 and it is the same silver color.

Q: 10. Can you change the file name from the front 4.3" touchscreen panel when scanning to a USB drive? Is a filename change easy?

A: Yes, you can easily choose your own filter name from the touchscreen on the Epson RapidReceipt RR-600W Wireless Receipt Scanner. The process is described on page 93 of this user manual: https://bhpho.to/3U6Ncd2.