Modular synthesizer enthusiasts looking to recreate the legendary sounds of the Roland Jupiter, Juno, and SH-101 will be impressed with the erica synths Black 3109 VCF/VCA, a Eurorack module that is built around the AS3109 VCF integrated circuit, a contemporary of the original IR3109 used in vintage Roland synthesizers.

The original IR3109 had some drawbacks, which were addressed in the new design, such as a volume drop compensation circuit when using resonance as well as a built-in VCA for more versatility in compact setups. Additionally, 1V/oct tuning is implemented, so you can use this module for perfect VCF keyboard tracking and also as a VCO. The module includes a power ribbon cable and a set of mounting screws.

VCF/VCA from Vintage Roland Synths    Character of Jupiter, Juno, and SH-101    24 dB/Oct Lowpass VCF    Volume Drop Compensation for Resonance    Built-In VCA    Cutoff Level Attenuator    1V/Oct Tracking    Module Depth: 1.4" (35mm)    Includes Ribbon Power Cable    Includes Set of Mounting Screws

• 24 dB/oct lowpass VCF 
• Volume drop compensation 
• Built-in VCA 
• Cutoff level attenuverter 
• 1V/oct tracking
• Power consumption: +25mA / -25mA
• Module depth: 1.4" / 35mm

Related Questions and Answers

Q: 1. will this work on the L-358 Meter?

A: Yes.

Q: 2. The included Edelkrone focus ring adapters bump into the module during calibration. If I were to put something like a Tilta Follow Gear Ring adapter around a Canon EF lens, what would happen during the Edelkrone's app calibration? Would the lens spin forever because there are no hard stops? Or would it find it.

A: Typically during the calibration process you would be able to stop the rotation at the lens's focus end points and the motors will digitally mark the end points, knowing the min and max focus throw.

Q: 3. it this compatible with iMac (Retina 5K, 27-inch, Late 2014)?

A: No it would not work. You would need something like this.

Q: 4. Will this work on the L-558 meter?

A: No, the Sekonic RT-GX Godox Transmitter Module will only work with the following models. Lowepro DP Kit Sekonic Speedmaster L-858D-U

Q: 5. Can anyone confirm if the Control port on this version is functional? I've seen reports that early models had issues with that.

A: Tilta confirms that the control port works on the Tilta Advanced Power Distribution Module for RED KOMODO . The Module features the following ports: (1) 14.8V P-Tap Port (2) 14.8V 2-Pin LEMO Port (1) 3 Pin Fischer R/S Port (1) Timecode Port (1) Red CTRL Port (1) Genlock Port (1) 5V USB Port

Q: 6. is this compatible with the dell inspiron 3847?

A: According to the manual for your computer, this ram module should be supported. The computer supports DDR3 DIMM 1600 MHz.

Q: 7. would this cable work with a 2014 Bose acoustimass 10Iv speaker system?

A: No. The PORTKEYS BT1 Bluetooth Module Connection Cable is intended for use with a PORTKEYS BM5 Monitor. It is not compatible for use with a Bose Acoustimass Speaker System.

Q: 8. Are Sekonic L-858D and RT-GX compatible with Godox AD100Pro?

A: The Sekonic RT-GX Godox Transmitter Module in the Sekonic L-858D Speedmaster Light Meter is compatible with the Godox AD100pro Pocket Flash.

Q: 9. Is this module necessary to be able to run a Photo Booth?

A: The DNP WCM Plus Wireless Connect Module (B&H# DNWCMPLUS) allows for a wireless connection between an Android (e.g. phone or tablet) or Apple iOS-based device (e.g. iPhone or iPad) and specific models of DNP printers (e.g. DS620A, DS820A, QW410, DS-RX1HS, DS40, or DS80). It is only required for that purpose. Alternatively, printers such as those may be connected to many computers (typically using Windows or macOS) by USB cable.

Q: 10. Will the runstop and timecode ports still work if there is no battery connected? (with camera powered through the 2pin lemo)

A: No, the Tilta Advanced Power Distribution Module for RED KOMODO (Black, V-Mount Type II) will need to be powered via a v-mount battery in order for the ports to operate.