Erica Synths Black K-Phaser Eurorack Module 10 Hp

Erica Synths Black K-phaser Eurorack Module 10 Hp

Product Code: eq171704
Availability: In Stock

$687.00 $1,051.11

Qty

18 reviews Write a review

Description
Reviews (18)

Modular synthesizer enthusiasts looking for a classic phaser effect will appreciate the erica synths Black K-Phaser, a Eurorack module that pays tribute to the German electronic music pioneers that largely shaped the sound of electronic music worldwide.

The Black K-Phaser utilizes the original design with 8 all-pass filters with photoresistors, but with redesigned filters and modulation circuit, plus other unique features. A DIP switch at the rear of the module allows for selecting the number of filter stages involved in the resonance path, a resonance attenuverter brings in unusual feedback artefacts, and Spread mode detunes the all-pass filters for even more distinct behavior.

A built-in voltage-controlled LFO with selectable waveforms expands modulation possibilities for the phaser and can be used as an independent modulation source for your modular system as well. The module includes a power ribbon cable and a set of mounting screws.

Classic German Electronic Music Phaser 8 All-Pass Filters Photoresistor Control Over Filters Classic and Spread (Detuned) Modes Resonance Attenuverter Selectable Resonance Path Built-In VC LFO with Dedicated Output Dedicated Wet Output Module Depth: 1.4" (35mm) Includes Power Ribbon & Mounting Screws

Key Specs
Sound Generation	Analog
Maximum Polyphony	Not Specified by Manufacturer
Audio I/O	1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Input (Eurorack Compatible) 2x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output (Eurorack Compatible)
MIDI I/O	No
CV/Gate I/O	1x 1/8" / 3.5 mm TS Modulation CV Output 2x 1/8" / 3.5 mm TS CV Input
Patch Points	No
Eurorack Current Consumption	88 mA on +12 V Rail 78 mA on -12 V Rail
Horizontal Pitch	10 HP
General
Item Type	Eurorack Module
Sound Generation	Analog
Keyboard	No
Expression Controls	No
Number of Pads	No
Display	No
Sounds
Maximum Polyphony	Not Specified by Manufacturer
Built-In Effects	Modulation: Phaser (8-Stage)
Performance Functions	No
Built-In Speaker	No
Synthesis
Oscillators	No
Mixer	No
Amplifiers	No
Envelopes	No
Filters	No
LFOs	Number of LFOs: 1x Global Waveforms: Sawtooth Up, Triangle Controls/Modes: LFO Sync, Rate/Frequency
Sequencing & Recording
Sequencer	No
Arpeggiator	No
Connectivity
Audio I/O	1x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Input (Eurorack Compatible) 2x 1/8" / 3.5 mm TS Unbalanced Mono Instrument Output (Eurorack Compatible)
Pedal Support	No
MIDI I/O	No
CV/Gate I/O	1x 1/8" / 3.5 mm TS Modulation CV Output 2x 1/8" / 3.5 mm TS CV Input
Control Voltage Level	±5 V
Patch Points	No
Sync I/O	No
Network I/O	No
USB I/O	No
Media/Memory Card Slot	No
Audio Performance
Maximum Input Level	+10 V p-p
Included Software	No
Mobile App Compatible	No
Power
Power Requirements	Eurorack Power
Eurorack Current Consumption	88 mA on +12 V Rail 78 mA on -12 V Rail
Physical
Color	Black
Horizontal Pitch	10 HP
Included Accessories	No
Packaging Info
Package Weight	0.445 lb
Box Dimensions (LxWxH)	7.75 x 4.15 x 2.5"

8 all-pass filters with photoresistor control
Classic and Spread (filter detune) modes
Resonance attenuverter
Selectable resonance path (DIP switch on rear of module)
Built in VC LFO with a dedicated output
Wet output
Power consumption: +88mA / -78mA
Module depth: 1.4" / 35mm

Related Questions and Answers

Q: 1. Description states 10' x 12' - 10 feet wide or high?

A: This is ten feet tall by twelve feet wide.

Q: 2. Hi, this work with Tilta BS-T03 Base Plate?

A: No this dovetail plate is designed to be used with Tilta 15mm LWS baseplates, and will not work with Tilta 15mm Quick Release Baseplate for Sony VCT-U14 Tripod Adapter(TIBST03).

Q: 3. How would I mount it to a tripod?

A: The tripod plate can mount directly to the bottom of a dovetail.

Q: 4. weight?

A: It is pretty light, only 15 pounds.

Q: 5. Is the black fabric light proof?

A: No, it is not light opaque. This is not a 'blackout' drapery, but a backdrop.

Q: 6. How large is the pole pocket?

A: Pretty large, you can easily fit a standard background mount which is like 1/2 or so.

Q: 7. Which is heavier, Impact or Backdrop Alley?

A: The weight difference is very minimal between the two backdrops, Backdrop Alley is .10 of an ounce, heavier than Impact. Both are nice backdrops.

Q: 8. do you think the front pouch would fit my ipad 10.5 pro? it measures 6.8"x9.8"?

A: Unfortunately, the front pouch would be too small.

Q: 9. Can I put it in the dryer?

A: Yes this can put in a dryer on a low setting.

Q: 10. Will this work with the Tilta DSMC2 kit 15mm baseplate?

A: The Tilta 10" Lightweight Dovetail Plate (Black) will mount to the bottom of the Tilta 15mm LWS Baseplate for RED DSMC2 Cameras.

Nicholas	17/09/2024
[10 HP] Works great and really intuitive to use. There's plenty of video reviews and demos on the net to help learn the workflow for noobs like me. It's portable and great for spur of the moment ideas and helps get started learning electronic music without too many distractions. 5

Phil	15/09/2024
[Analog] Great bundle for the price. The QSC K10.2's are solid performers. Very happy with purchase 5

Pierr	03/08/2024
[Black] remember to split your eurorack modules even on the buss power, you have second row and you can put your power hungry modules in that row, also you get about 70mm depth on the bottom row as there is no obstruction from the bus board, use modular grid to sort out the arrangement, I got this in 2 days from B&H, incredible timing. Thank You Guys !! 5

Jonathan	27/07/2024
[10 HP] Really fun module. You can sample into it from outside your rack. Cool stuff 5

Milos	26/07/2024
[Analog] Great keyboard, works as intended - and a good amount of options under the hood. Will your keyboard be a bit messier looking? Sure..but a really cool way to customize exactly what you want your perfect 4-voice poly/paraphonic instrument to do. And yes you can go beyond 4 voices using its midi outputs. All in all a pretty cool way to incorporate a case and keyboard in one. 5

Stephen	23/07/2024
[Eurorack Module] A substantial improvement in both sound quality and functionality over our 15" powered (750W) speakers. Really great sound and the ability to dial in delay on each cabinet is really convenient. About to order K12.2 after using the 10s a few times. 5

Austin	22/07/2024
[Black] I have been using this as a source for automated modulations and a sweeping sweet-spot finder in my patches, overall it frees up some sends for me and I find cool sounds faster 5

Jessie	12/07/2024
[Black] great sound better than I expected. 5

Jesse	01/07/2024
[+10 V p-p ] Purchased for DJ sets and for my daughter's band to play gigs. Worked well, easy to set up, sounded great. I'd buy it again. I prefer the 10 to the 12 woofers as to me the bass is punchier - fantastic especially if using a subwoofer for dance music with low bass. 5